€ 944,00

Description

1. [Parameters]: 60 Watt 1000Mm Length 50Mm.
2. Each Tube Has Been Tested Before Leaving From Our Factory, We Try Our Best To Give A Good Shopping Experience And Make You Not Waste Time And Lose Money..
3. [Installation]: You Need To Make Sure The Positive And Negative Pole. We Have Connected The Leads, So That You Can Quickly Install The Tube..
4. [Upgraded Version]: Upgraded Laser Tube Has A More Stable Power, Which Is Favorable To Increase The Cutting Speed. The Tube Has Long-Time Life Because Of The Especial Technology. The Life Span Is About 1800-2500H Under Normal Use..
5. [Application]: It Is Mainly Used For Laser Engraving Cutting Machine And Other Laser Equipments. If It Is Broken In The Transportation.

Tips: We are offering our customer a reliable package. As for the tuve is made of glass, any damage in the transportation, please contact us immediately. Introduction Output power: 40 W Dimensions: Length 700 mm Installation instructions: 1. Determine the positive and negative poles of the laser tube ( Near the spiral glass tube inside is positive and the other is negative). Before you use, the water tank must be filled with clear water. 2. Connect the cooling water pipe, the connection method is to feed water from the positive pole, the other pole is the outlet of the water. The water inlet better face down and the interface can not be linked. After passing through the wáter, there is no wáter bubbles in it. 3. Please adjust the laser light path. The ultimate goal is to make the laser point enter from the middle of the entrance hole of the laser head. If the light path is not correct, maybe the tube power is weak. 4. When the light path is adjusted, the engraving can be cut or used, according to the actual situation to control the power output. [WARNING] 1. The high-voltage power supply of the laser requires reliable isolation! 2. The cooling water should have at least 20 liters, and change it every two weeks. Suitable temperature less than 30 grades 3. In winter, the water in the laser tube needs to be discharged first to prevent the tube from freezing and cracking. 4.This laser product is not visible light. The laser beam has a burn or more serious damage to the body. In the area of the optical path of the optical transmission, the laser burn must be avoided during work and when you using ! Avoid of unnecessary damage, please open one end of the tube and then take the tube out carefully.

Reviews

60W CO2 Glass Laser Tube 1000mm Length Dia 50mm 10.6μm for Laser Cutting and Engraving Cutting Machine

Fast Delivery to Finland

Easy Returns & Exchanges

Ask About This Product

Similar Products

Disclaimer: The price shown above includes all applicable taxes and fees. The information provided above is for reference purposes only. Products may go out of stock and delivery estimates may change at any time. desertcart does not validate any claims made in the product descriptions above. For additional information, please contact the manufacturer or desertcart customer service. While desertcart makes reasonable efforts to only show products available in your country, some items may be cancelled if they are prohibited for import in Finland. For more details, please visit our Support Page.

Frequently Asked Questions About 60W CO2 Glass Laser Tube 1000mm Length Dia 50mm 10.6μm for Laser Cutting and Engraving Cutting Machine in Finland

Where can I buy 60W CO2 Glass Laser Tube 1000mm Length Dia 50mm 10.6μm for Laser Cutting and Engraving Cutting Machine online at the best price in the Finland?

desertcart is the best online shopping platform where you can buy 60W CO2 Glass Laser Tube 1000mm Length Dia 50mm 10.6μm for Laser Cutting and Engraving Cutting Machine from renowned brand(s). desertcart delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.

Is 60W CO2 Glass Laser Tube 1000mm Length Dia 50mm 10.6μm for Laser Cutting and Engraving Cutting Machine available and ready for delivery in Finland?

desertcart ships the 60W CO2 Glass Laser Tube 1000mm Length Dia 50mm 10.6μm for Laser Cutting and Engraving Cutting Machine to Helsinki, Espoo, Tampere, Vantaa, Ouluand more cities in Finland. Get unlimited free shipping in 164+ countries with desertcart Plus membership. We can deliver the 60W CO2 Glass Laser Tube 1000mm Length Dia 50mm 10.6μm for Laser Cutting and Engraving Cutting Machine speedily without the hassle of shipping, customs or duties.

Does desertcart have 100% authentic 60W CO2 Glass Laser Tube 1000mm Length Dia 50mm 10.6μm for Laser Cutting and Engraving Cutting Machine online?

desertcart buys 60W CO2 Glass Laser Tube 1000mm Length Dia 50mm 10.6μm for Laser Cutting and Engraving Cutting Machine directly from the authorized agents and verifies the authenticity of all the products. We have a dedicated team who specialize in quality control and efficient delivery. We also provide a free 14 days return policy along with 24/7 customer support experience.

Is it safe to buy 60W CO2 Glass Laser Tube 1000mm Length Dia 50mm 10.6μm for Laser Cutting and Engraving Cutting Machine on desertcart?

Yes, it is absolutely safe to buy 60W CO2 Glass Laser Tube 1000mm Length Dia 50mm 10.6μm for Laser Cutting and Engraving Cutting Machine from desertcart, which is a 100% legitimate site operating in 164 countries. Since 2014, desertcart has been delivering a wide range of products to customers and fulfilling their desires. You will find several positive reviews by desertcart customers on portals like Trustpilot, etc. The website uses an HTTPS system to safeguard all customers and protect financial details and transactions done online. The company uses the latest upgraded technologies and software systems to ensure a fair and safe shopping experience for all customers. Your details are highly secure and guarded by the company using encryption and other latest softwares and technologies.