--- product_id: 93455857 title: "ZEROPLAY Miter Bars by MICROJIG (Double Pack) (5-(Pack))" brand: "micro jig" price: "€ 678.01" currency: EUR in_stock: false reviews_count: 8 category: "Hi" url: https://www.desertcart.fi/products/93455857-zeroplay-miter-bars-by-microjig-double-pack-5-pack store_origin: FI region: Finland --- # ZEROPLAY Miter Bars by MICROJIG (Double Pack) (5-(Pack)) **Brand:** micro jig **Price:** € 678.01 **Availability:** ❌ Out of Stock ## Quick Answers - **What is this?** ZEROPLAY Miter Bars by MICROJIG (Double Pack) (5-(Pack)) by micro jig - **How much does it cost?** € 678.01 with free shipping - **Is it available?** Currently out of stock - **Where can I buy it?** [www.desertcart.fi](https://www.desertcart.fi/products/93455857-zeroplay-miter-bars-by-microjig-double-pack-5-pack) ## Best For - micro jig enthusiasts ## Why This Product - Trusted micro jig brand quality - Free international shipping included - Worldwide delivery with tracking - 15-day hassle-free returns ## Description Size:5-(Pack) ZEROPLAY Miter Bars are hassle-free, dead-on accurate, and super-simple to use. Build better, more accurate jigs, sleds, and fixtures faster. Your projects will thank you. ## Features - Hassle-free miter bars using One-Touch Calibration - No slop, side-to-side play or seasonal warping - Top-down installation for easy and fast mounting to jigs, fixtures and sleds - ›See more product details ## Images ![ZEROPLAY Miter Bars by MICROJIG (Double Pack) (5-(Pack)) - Image 1](https://images-na.ssl-images-amazon.com/images/I/31hlhSq20OL.jpg) ![ZEROPLAY Miter Bars by MICROJIG (Double Pack) (5-(Pack)) - Image 2](https://images-na.ssl-images-amazon.com/images/I/31hlhSq20OL.jpg) ## Customer Reviews ### ⭐⭐⭐⭐⭐ Well-conceived product, makes my shop-built jigs accurate *by T***N on March 1, 2015* I'm building quite a few picture frames so I built a 45 degree miter sled to speed up the process and improve accuracy. I built the sled with quarter sawn hardwood runners to minimize seasonal movement. The sled worked well for the most part but I recently attempted some wide-board frames (unforgiving) and could not get the miters to close properly. I checked my saw's blade alignment to the miter slot and checked the alignment of the sled fences to the blade with 45 triangles. All looked good but I quickly discovered too much slop between the runners and the miter slot. I built the sled back in August and it's winter now so the wood did contract and there is too much slop to get accurate cuts. After some Internet searching I found these guide bars. I installed one bar on the sled and aligned everything through the top of the sled. The instructions are clear and accurate providing hole spacing, depth of counter-bore, etc. It is a little fussy to get the guide bar set to the proper width to minimize slop but still allow smooth movement of the sled. However, 10-15 minutes of set-up for what should be an accurate tool for years to come is well worth it to me. The proof is in the results. Every corner of every frame is now tight and professional. ### ⭐⭐⭐⭐⭐ Amizing product - cant believe i went this long without *by E***S on May 31, 2017* this is my second set. I build oversized, heavy furniture and I am constantly upgrading my table saw slide/sled. As an Engineer I am very OCD that my 90 deg angles... have to be 90 degrees.. not 88.. .not 92... but 90 +/- 0.5.I used to make my one bars our of hardwood but couldn't really get a nice fit. They would work fine the first few times but then wear out and there was a slightly little play to each side which I was fixing with tape to increase the width by mils. \these ZEROPLAY are amazing. follow the instructions. use a nickel and a thickness gauge and you don't have to worry. my sled is 4ft long x 2.5ft wide. and I used specialty extruded aluminum as the fence with a wooden backup at the saw cut line.Highly recommend these miters bars.22JUN17 UPDATEI STILL LOVE THESE... I NEED ZEROPLAY TO BUILD LONGER ONES THOUGH - JUST TO FIT MY NEEDS! :) ### ⭐⭐⭐⭐⭐ Some Skills Necessary *by J***C on February 11, 2018* Setup in your mitre slot is extremely easy. You’ll be in business in 90 seconds. Building a sled is far more time consuming but not impossible if you take your time and have some basic woodworking skills. The included directions give you basic plans for a sled but using your imagination, the possibilities are endless.Having a drill press and the necessary forstner bits are almost a must for building a sled which I didn’t foresee when I purchased these. Just another reason to buy more tools to the wife’s dismay.For my sled, I used 3/4” cabinet plywood and glued on a 3mil PVC sheet which makes gliding on the table surface smooth as butter. I bought an extra handle for my GRR-Ripper and used that for extra control. I painted the finished product and plan on adding a plexiglass guard to protect against any possible kick backs.Overall, a great and well thought out product and definitely recommend. --- ## Why Shop on Desertcart? - 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016 - 🌍 **Shop Globally** — Access 737+ million products across 21 categories - 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price - 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members) - 🔒 **Secure Payments** — Trusted payment options with buyer protection - ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews **Shop now:** [https://www.desertcart.fi/products/93455857-zeroplay-miter-bars-by-microjig-double-pack-5-pack](https://www.desertcart.fi/products/93455857-zeroplay-miter-bars-by-microjig-double-pack-5-pack) --- *Product available on Desertcart Finland* *Store origin: FI* *Last updated: 2026-06-27*