🎨 Masking Mastery: Elevate Your Projects with Precision!
This 5 Roll High Temp Masking Tape Kit features green polyester tape in various widths (1/4", 3/8", 1/2", 3/4", and 1") that withstands heat up to 400°F for 20 minutes, making it perfect for a wide range of applications including powder coating, painting, and more. Each roll is 72 yards long and is proudly made in the USA.
H**W
Good for powder coating
Stuff is great for powder coating and cerakoting
M**L
Worked
P coated and baked many parts where I had to wrap 5/8" threads to prevent paint baking on said threads..worked perfect and I'm cooking parts at 400 degrees for 20 mins..cooked tape gets a little brittle but never peeled away during process and removed easily off finished/cooled parts. Will definitely buy again when my current stock runs low.
E**O
Muchas Gracias funciona muy bien
funciona muy bien, tal como se presenta
H**G
Worked ok….
But did not adhere as well as other high temp tapes I’ve used
C**S
Great tape in the sizes I needed for an oven baked paint project
I used this tape kit for a oven baked paint coating on some small accessories and parts for a few of my toys. The tape stuck to the cleaned materials better than anything with oil or grease still on it, but this is to be expected. The tape stayed on as I thoroughly cleaned the parts with two different solvents (acetone and a proprietary de-greaser). The tape also prevented over-spray or runs from getting on the protected areas (the intent behind the tape) and the tape held up to my oven curing process (max heat of 350 degrees for the paint, not max for the tape).I was able to remove the tape easily without it leaving residue behind and the lines were sharp but did not have the typical "built up" look of tape being used to prevent the over-spray. I like this tape and if I run out will purchase more for future projects.
R**8
Does the job.
I used this when powder coating some calipers ,the first time I used it I had no issues..the 2nd time the larger tape kinda shrunk and lost shape in the oven, but it might also be that I did increase the temp the 2nd time(450 degrees) for a few mins and I did have them in a little longer, then last time (about 5 extra mins, 25 mins total)I'll test the tape out more and update the review if needed. I honestly think they are a solid 4 out of 5...BTW when cutting the tape for shapes when on a metal item make sure you use a sharp exacto knife or razor blade a dull one will mess up the tape.
S**R
Will suffice for cerakoating
Could be stickier, leaves sharp paint lines. It survived when used in an oven at 375 for an hour. Easy to use.
D**N
Tape held up good. Did not melt.
Good product. Baked at 375F for 15mins. Tape stayed and did not melt.
Trustpilot
3 days ago
4 days ago