PSI WoodworkingLABAR418 Lathe Headstock Spindle Adapter 1" x 8tpi to 1-1/2" x 8tpi

There’s not a lot I can say about this one, except, it works exactly like should. Good quality too.

Needed an adapter to convert my lathe to a 1" x 8tpi spindle. Works perfectly and made my lathe more versatile.

Very nicely machined. Both ends threaded perfectly for a solid fit. The adapter runs true. Did exactly what I needed.

Nice fit on an old ER Shopsmith. Runs true.

Great adaption for my ShopSmith lathe chuck. It attaches and removes easily and is very sturdy. I wouldn't be able to use the Nova Chuck without it. Highly recommend this attachment

I bought this adapter when I upgraded from an (very) old Delta lathe with 1 x 8 treads to a newer Jet 1824 electronic variable speed lathe with a 1 1/4 x 8 spindle. I had a large collection of faceplates, including some that were made into vacuum chucks that fit on the Delta spindle but not the Jet. It probably would have cost more than $150 to replace all these faceplates. Instead, I purchased this adapter. It also let me use the new lathe to finish a couple of projects that were in progress.The adapter was much more substantial than I expected for the price. In general, it seems very well made. I had two issues with it, both of which could be addressed with minor modifications.First, when I initially mounted a faceplate to the adapter and then to the late, I had a lot of wobble in the faceplate. At first I thought that the adapter was non-concentric. But the problem was that the thread on the PSI adapter bottomed out on the female threads of the faceplate and prevented the shoulder of the adapter mating with the shoulder of the lathe spindle. The wobble was reduced very significantly by making a 3/16 inch plywood spacer and mounting it between the adapter and the faceplate. It still has a minor wobble, but I am not sure if that is the result of the lathe spindle, the adapter or the faceplate. If the PSI adapter had been manufactured with a slightly shorter threaded portion use of a spacer would not have been necessary.Secondly, this adapter is solid, and therefore cannot be used as is with a vacuum chuck. I solved this problem by drilling a 3/8 inch hole down its length. The adapter is not hardened so its easy if you take your time.I was able to get a different spindle adapter for my Teknatool G3 chuck, so I will not be using this PSI adapter for use on the 4 jawed chuck. I think that changing out the chuck adapter is probably much better that use of this PSI adapter with a chuck, both because of concentricity and because the headstock to bowl distance is as short as possible.Overall I am satisfied with this purchase.

I use this on my shopsmith to use standard 1” 8tpi attachments. Works perfectly

The above picture of this adapter doesn't do it justice. I was surprised at the quality. This item is a large, heavy weight, finely machined and polished spindle adapter. Both ends screws on smooth. It's top quality at a price that's cheaper than PSI (Penn State Industries), sales it for. And a lot cheaper than other adapters are sold for. View my photos for more detail.It turns true and on center. It doesn't have set screws to lock it to the spindle for reverse operation, but I can drill and tap a couple of holes for set screws if it becomes necessary. It has a solid core on the male threads so you can't use a vacuum chuck.On the female end there are two flat spots for a wrench if necessary. I use an 'Adjustable Slip & Lock - Plumbers Nut Wrench,' its cheap light weight and can accommodate the large size of the adapter (search Amazon # TW408302). The adapter does jamb tight against the chuck and/or spindle so the wrench might come in handy. The nut wrench is also sold at local home improvement centers.This adapter screwed nicely onto my lathe's spindle, right over the shoulder of the spindle to mate with the shoulder of the adapter, as if it was made specifically for my lathe. I did read a magazine Q & A article where someone said their adapter didn't screw on far enough to seat onto the shoulder of the spindle and was asking if he could use a stack of large washers to fill in the gap. The answer was - not a good idea to use washers from the hardware store due to variation in hole ID and thickness from one washer to another. It was suggested to use 'Anti-Lock Lathe Spindle Washers' to fill in any gaps (search Amazon, about $2). Maybe this might help others, but it was not an issue with my lathe.Specs:OD at female end: 2 1/16"Depth of female pocket: 1 1/2"Depth of shoulder inside female pocket: 1/4"Length of male threaded end: 1"Total length: 2 3/4"Wrench size to fit flats: 1 13/16"Weight: 1 lb. 4.8 oz.[See my photos for more detail.]

Fit my Laguna 18/36 spindle perfect

I use this piece for my old Shopsmith (cast iron) and it works very well. The delivery was fast.

New to this so getting use to things

Feels like a solid heavy duty piece. Only place I could find an adaptor for my 35 year old lathe and it fits great. They also refunded import fee as it was less than expected.

good product