VideoSecu24 inch Extension Full Motion Swivel Articulating TV Wall Mount Bracket for Most 40"-90" LED LCD OLED UHD Plasma Flat Screen TV with VESA 684x400,600x400,400x400,200x200mm MW480B BCL

Mounted a 75' inch TV. Very sturdy and easily movable. Bought another one for my 65' TV.

This is for the 2 stud full motion mount... many of the reviews are for the single stud and everyone knows that 2 studs are better then 1 ... just sayingMy installation was for an old panasonic plasma that still has a picture comparable to the OLEDs but has a wierdVERSA of 660x320 and this is one of few mounts that has versibilty to handle it. The hardest part is measuring where to locate the wall portion based on the TV mount rails and where you want the TV to be when finished.I needed the TV to be at a certain height to clear a cabinet.The TV rails should be somewhat centered on the TV and the instructions refer you to the TV instructions which of course everyone has. But it isn't hard to center the rails and from there it takes a bit of math to determine where to attach the mount to the wall. the cL to cL of the holes in the vetical is 11" and the total width is 12". It would help if there was a template as this would be easy to tape to the wall and drill the pilot holes.The bolts provided were fine despite other reviews and the drill bit is 7/32s as specified so don't go out and get different bolts or drill bits.What most people don't realize is that they shouldn't be using a drill to drive in the bolts. What they should be using is an impact driver which prevents breaking the bolt heads off. I've broken bolt heads off with a drill and cursed it and tightened by hand even though I had an impact driver. Once I realized and used an impact driver .. I haven't broken off a bolt head in years. And now you know ;-))The unit is well built and easy to move. Attaching the TV / rails to the mount on the wall is a bit tricky due to the tight fit of the rails to the mount arms. My TV only weighs 95lbs and once the TV is on it is hard to adjust as it is solid no need to worry about the TV sliding off as some reviews have stated. The J hooks on the rails match the mount arms exactly and having a third person to help center the TV on the mount horizontal arms would be advised for heavy TVs. Safety in numbers. It's not just the weight but the size that has to be factored in.The unit is well built, motion is smooth and even my wife can adjust the TV. You can pay more and depending on your versa be able to get a cheaper one but this unit provided me the VERSA and motion that I needed. Thumbs way up!!

Liked the ease with which I could adjust and level the TV once mounted.

When I built shelves along one wall of my living room, I provided an area for the large projection television I had at the time. I eventually upgraded to a 60" Sony as it was the largest flat screen set I could fit into the spot I allocated for a television. I decided to upgrade to an 86" LG and needed to develop a way to mount the larger television to the shelving, as it would not fit into the hole I originally provided. I found the VideoSecu 24" bracket, ordered it from Amazon and began designing the support brackets for it. I based my design on the published dimensions contained in the description on Amazon, cut and stained the 2x4s on Friday morning, stained the wood and installed the brackets that afternoon. The bracket arrived late Friday evening and on Saturday morning, I unboxed it to start its installation, only to find out that the dimensions provided were incorrect. Instead of being 12" tall, the bracket that mounts to the wall is actually 12 1/2" tall. With the bracket pushed up against the bottom of the shelf and the top two lag bolts installed, the bottom two lag bolts would miss the center of the 2x4 and have inadequate holding power. I spent the next two hours removing the bottom 2x4 bracket and lowering it 1/2" to allow the lower lag bolts to be inserted in the center of the 2/4. I should have waited for the bracket to arrive before installing the supports, but I trusted the published dimensions. They were not correct and added about two hours to the project.On other issue I encountered is the two brackets that are installed on the television using the VESA mounting holes have plastic shims to cushion them to the horizontal support brackets. I tried sliding the two brackets onto the horizontal supports and could not do so without resorting to using a hammer to fully seat them. The new television arrives on Thursday. Hopefully once the brackets are installed on the television, my brother and I will be able to get the brackets to more easily slide onto the horizontal brackets.I will update this review once the television has arrived.

We recently got rid of a bunch of the furniture in our master bed room to make more room and de-clutter it. One of the things we did was replace our existing TV stand with a newer one we had gotten for free. What we didn't realize is how low the TV was going to be so my wife and I decided to go ahead and wall mount it.We not only wanted to raise the height of the TV we also wanted the TV to be able to pivot so that we could angle it towards a recliner we use for playing video games for long periods of time. This mount ended up being the perfect solution for us. I was able to hit two studs in the wall that were 24" apart (interior wall) and I was able to find the exact center of them both so that it was mounted securely.In the packet of metric bolts that the mount came with I was able to find the perfect size and length to bolt the mount to the back of the TV. All in all it took me about an hour to calculate out getting the TV centered in the wall along with finding the right height and marking out the two studs in the wall I wanted to attach it to. When all was said and done this mount ended up being rock solid and perfect for mounting our older 65" plasma TV to. Our TV weighs in at 75# and even with the mount fully extended and angled as far as it will go towards the wall this mount is rock solid and very, very secure. We couldn't be happier with how this all turned out. Would definitely purchase again.