BLUONICS Sediment Water Pre-Filter Reusable Spin Down Filter for Whole House City and Well Water 40 Micron with both 1” + 3/4” NPT adapters included

I purchased this system and have taken my time to install it. The first time one Glass sleeve and one UV Lamp came cracked right out of the cardboard tubes. Customer Support was really nice and they sent a replacement.Instructions for the UV lamp and one key O-Ring did not come in the package . But they shipped that as well later.I bought a replacement kit to keep in stock. I live overseas and I cannot get the exact sizes locally so I better have an extra set. Got one the lamps cracked again. They were excellent and replaced it right away the second time. Very kind and responsible.The product design needed several tweaks1) The metal frame hat 2 posts on the front which made it almost impossible to use the included plastic wrench. See attached photo. The tool would hit the post with less than 1/4 of a turn. It was very hard to unscrew the filters. So I took the unit down and removed the posts, and addesd a triangular bracket on each side. Now the front is completely obstacle free and the plastic wrench can move freely making filter tightening and untightening much easier!2) I was told water flow could only go on one direction LEFT to Right, but my setup would be much cleaner if it went the other way around. I simply changed the pressure gauge hoses position and inverted the water flow direction of the setup. I also moved the brass fitting from one side to the other. It works fine. Filter order starts in RIGHT -20 micron to 5 micron to 1 micron - LEFT3) UV lamp housing was installed vertically and screwed to the wall. There is a drain valve which is supposed to go on the bottom of the unit (must be installed in the lower part of the setup) and its used if you ever want to empty the housing . The Housing has welded brackets that I screw to the wall and the drain valve points straight to the wall too. I think it would work better pointing away from the wall otherwise you need to collect the water with a small hose from the back .Even though there have been several tweaks and twerks in order to get this setup working, I think its been worth it. I would give this product a 3.5 Star because in my case it was not easy to mount right out of the box (because of my setup) - but customer service was really nice and the company was responsible to replace damaged articles and provided manuals and support nicely. I value that when buying a product so Im giving them that extra 1,5 stars for that.Will write to them to suggest mods though. I hope the pictures can help others if they consider them useful!I would buy again just because of the company's customer oriented attention.

Our well water has high iron and is slightly acidic. We knew it wouldn't correct the ph level but did expect this filtration system to pull out the iron and it didn't (we even had it professionally tested to make sure). We're pretty disappointed to say the least.I will say that the UV light part of the system is on point and does it's job beautifully.

Did a lot of research before deciding which water filtering system to buy. I wanted to make sure the system had good large filters, I wanted a sturdy, easy to install setup, I wanted the necessary gauges to identify filter conditions, I did not wanted to lose gallons per minute when installed. I also wanted 2 UV lights for redundancy and safety. This system does all that!!!! Don’t waste your money looking at imitations, this is the real thing. Sulfur smell in the water is gone and after checking the water quality, it is absolutely perfect. We no longer buy bottled water and we have excellent water throughout the house vs just on the refrigerator. Customer service from Bluonics is amazing!! They answer the phone immediately, and will help you with any concerns. They fully stand behind their product. Best purchase I have done in many years.

Works great for my water well system. However the item had some minor damage. The Quartz Sleeve has a crack on the opening end minor I got it to stop leaking, by siding the tube back out from the other side”closed side”. Water tested at 8.9 ph level and after installing tested at 7.29 ph. Would love a replacement sleeve! Will change to 5 star!!

Very poor quality product. I have installed many filter systems. This is the worst. The stand needs to be modified in order for it to be functional. One of the filters on each unit I received was cross-threaded and damaged. The filter wrench does not correctly fit the housings. The packaging is inadequate and the four systems I bought all arrived bent. Don't buy this product!

I order the bluonics filter system with 110w uv light for my home well water. The quartz tube for which the UV bulb sits in came broken. There was a paper with bluonics contact info in the package. I contacted them via email and was replied to within minutes. They sent me the part that was broken no questions or hassle at all. Have since installed system and couldn't be happier. Parts were all quality, pressure gauges on the filter rack are all glycerine filled gauges which are better than standard. I also really like the flushable prefilter, which reduces the frequency of filter changes.

A pretty complete filter system for a country water well. Might be a little over kill for the city. I am on well so added a pre filter also. My family noticed the water difference immediately and its been over a month now with great results. Only other item on my system for filtering is a Kenmore water softener/filter. It took a bit of planning, but I have had zero problems with leaks after initial fixes. It does take some Teflon tape on the fittings or a little drip will happen. I made sure no drips. Just make sure you use the three complete wraps of tape on all the fittings. Also make sure you use copper pipes out of the UV as Pex and CPVC are sensitive to UV light and will break down fairly quickly. This means also no fittings that are push on with the plastic/Teflon type inserts as they will breakdown too. Pics are of system in operation in my garage. I am adding foam pipe insulation to all pipes also. To keep unwanted UV light from the PEX and CPVC pipes and to copper to help eliminate sweating and any corrosion.

Got the units d the UV light is broken. Cannot complete the install. Lots of work to get stopped at the end. How do I get a replacement UV light.