Think Crucial introduces another practical piece to your cleaning tool collection with a replacement air purifier parts with Shark Hose Handle Parts. The 9" x 6" x 2" hose handle for everyday use. Our replacement hoses are compatible with Shark hose part 113FFJ. The light, durable hose fits models NV350, NV351, NV352 Our replacement hose handle restores a full connection from your floor head to the main dust reservoir. Premium hose for Shark part 113FFJ is essential. The suction collects fine dust particles and allergens, preventing them from recirculating into the air. Allergy sufferers, replacing the vacuum hose is necessary to maximize the vacuum cleaning power. This helps to ensure clean air and improve vacuum suction quality. The long-lasting and durable air filters are washable, reusable, safe, and non-toxic. Our air cleaner, air filters, and replacement part helps to ensure deep and cleaner air. Have confidence with a refreshing, clear feeling for a home space. Forget those dirty hoses by creating an active schedule to replace that cracked or leaking hose handle. Replacing Shark handles should help clean and purify air. Have confidence with a refreshing, clear feeling for a home, house, apartment, and purify the air. This is a generic product designed and engineered in the United States by Think Crucial. This is not a Shark OEM product and is not covered under any Shark manufacturer's warranty. The Shark brand names and logos are the registered trademarks of their respective owners. Any use of the Shark brand name or model designation for this product is made solely for purposes of demonstrating compatibility.
L**K
Happy to save my vacuum but all parts did not fit.
I searched my local vacuum stores for parts for my shark. Original parts are not available. So I had to go to an aftermarket part which I’m happy is available because I love my shark vacuum. The reviews for this part we’re not good because people were complaining about the red handle button didn’t work properly. Mine does in fact it’s very sturdy and works perfectly. However, the bottom hose attachment where it goes into the vacuum I was too big and sloppy and would not snap in. I had to resort to using duct tape to keep it in. Once I attached with the duct tape the suction is great. I am thankful that this part is available however more attention needs to be taken during manufacturing to make sure that the parts fit. I ordered the correct model number. The best thing is I do not have to buy a new $200 vacuum, the worst thing is that you will have to be MacGyver to make sure all the parts work properly. A little duck tape It’s no problem, however it is annoying when buying new parts.
A**Y
Almost a good product :(
The spring load little red button to connect to the vacuum doesn’t consistently work. I’ve used it 2 times. 30 day return :(. Probably have to tape it on...
J**C
Release button immediately came off
As soon as I put the part on the vacuum, the red release button immediately came off rendering the hose part useless. I tried putting the button back with the spring but found this impossible. Had to return the part unfortunately. Refund was processed fine. Have had success replacing other hose parts on the vacuum but still on the lookout for this replacement piece.
A**H
Almost perfect, needed to tweak it a bit to fit, but it does work
Purchased for a Shark NV358, although its a different color, we were able to get it to fit. The top fit into the handle perfectly, but bottom was an almost perfect fit with one exception that has been noted by others using for other models. The tabs for the hose connection are a bit too big. When you press the hose into the bottom (pictured), it doesn't lock in. The tabs are about a mm to high. To overcome this, I was able to push down on the dark gray plastic around the hose then very gently push the tab to lock it in place. It holds with no issue. I likely could have taken a nail file or razor blade to have trimmed it, but this worked perfectly.
T**0
Terrible Product
Terrible product. The handle release button popped off as soon as it was attached, the spring was lost and this new hose/handle is now completely useless.
L**N
Right model piece but too big.
The moment I put it on, the push tab came flying off its hinge. I knew that was a bad start but I put the piece back on anyways. Then I realized It never locks in place, like when you put the hose back in on a normal vaccum, it clicks shut. It wouldn't do that. It was made too big and too lose. So it never would click close and stay locked. So you couldn't really vaccum with the hose since it wouldn't stay on. So all in all, defective piece that's made too big. You're much better off just ordering the proper replacement piece from Shark that will actually clamp on!
H**H
Broke apart before it could be used.
I received the item and was happy to see that it appeared to be the exact same as the original, aside from the tubing being thinner. I put it onto the vacuum and was pleasantly surprised to find it fit perfectly and went on without any issues. Unfortunately, that didn't last long. I plugged the vacuum in and went to use it, when I heard something ricochet off the wall. The push button at the top of the hose that keeps it on the machine had popped apart and half of it and the spring had come flying off. Needless to say, I will be returning it. The quality is definitely lacking as it didn't even last a min on the machine before breaking.
B**O
Broke fairly quickly, like a lot of others.
I think the type of plastic used is sub-par and for not much more it could be ideal. Seller also wants me to take detailed photos of the broken stuff, and upload them to Amazon in order to get a replacement. I wasn't going to waste the 10 minutes doing that...
Trustpilot
3 weeks ago
3 days ago