Lian Li Uni Fan SL120 Boitier PC Ventilateur 12 cm Noir 3 pièce(s)

I was able to take each bank of three fans, slide them together, and use one set of wires to the controller. This system makes for a neat installation. They are very quiet. I have yet to begin accessing the controller to customize the RGB scheme, saving some fun for later.The RGB features are for aesthetics, and they look neat. The only issue is that the appearance of the fans shows up and lights up the rather ugly standard power cables. I’m in no hurry but may swap those out one day.

The fans look at feel top dollar! I was more than pleased with these. Clipping the fans together couldn't have been easier. It's worth noting, when you click the cables onto the fans it can only go on one end of the fan array. But of course you can always fit the fans the other way up ;-).What I didn't quite realise was that the controller is almost definitely required, but once wired up is pretty cool! I bought them in haste as I saw they could clip together, without realising they were Argb... I didn't have any ARGB connections. Luckily, you can use the USB 2.0 connections on your MOBO so I was a happy man!!I bought the set of three, but I actually fitted one at the rear of the case and 2 at the front. The only slight issue I had was finding somewhere for the controller which both front AND back could reach. Due to the thickness of the controller I couldn't mount it on the 2.5" bay... which meant hiding it behind the PSU. Getting my rear fan to it was a little tricky but I got there!The finished product is awesome! They look awesome and they run quietly as long as you dont accidentally click 100% fan speed.The only downside I can find, is that the L connect software messed with my fans more than I would like. Considering the controller is connected via a fan header i was hoping the MOBO would continue to control them. This seems to be the case for most of the settings, but a few light options seemed to meddle with the fan speed and I didn't quite understand why.All in all, I'm very happy with the money spent. ~£75 for 3 RGB fans, which uses only 1 fan header and 1 USB header (FYI it needs a SATA cable too for power)

I saw these fans on a tech video once and immediately fell in love with them. I knew that I had to have them for my first custom PC build.The Lighting Effects are brilliant, bright and easy to apply. The noise does get a bit loud when you ramp up the RPM’s, but even on the ‘Quiet’ setting, the PC stays incredibly cold.You are spending a bit of money for them, yes, but when you add them to your build, you can see where that extra bit of money goes. Don’t waste time, get them when you can. 🤩

The daisy linking technology Lian-Li uses is such a straightforward idea that I can't believe it hasn't been done long ago. It makes installation super easy and dealing with the wires is a breeze. My PC build had 11 of these fans and they all worked perfectly. The controller system is simple and intuitive. Admittedly these fans are on the pricer side, but given how easy it made managing the cabling and how great it looks it for me is very well worth it.

The fans arrived safely and, thanks to the super service by the seller, ahead of time. The item was just as described, no complaints at all. Communication from the company was prompt and the seller went above and beyond to help, and that's quite a rare thing these days. Highly recommended.

They are what you see, incredibly quiet and easy to install

The fans merge together only using 1 port to control and manage all. I’ve put 3 in the front of my base top and bottom screw. The sound only picks up if you’re playing a game that requests a lot from the pc to keep it cool. No issues with air flow. Would just get another fam to blow it out the back (Twss)

As a PC fan it performs very well and is nice and quiet up until about 85%. Their lowest speed with PWM is roughly 60%.The mechanism to slot them together is very easy and well made, but it has some durability problems.The motherboard wires also slot in and the connection on one of my fans has gotten very flaky. If it's not in contact with the perfect amount of pressure the all 3 fans just run at 100%.If you plan to stick these on a radiator make sure they'll fit - they're 120mm but still bigger than most other fans because of the connectors in the frame. The copper contact pad on the top of each fan is also exposed and ends up right where the fitting for the radiator will go. If they come into contact the fans will have some issues.The screw holes have no tolerance area and don't always line up well with the radiator - you have to push the fans together very tightly to be able to get all screws in which can be a massive pain if you don't have much space in your build to mess around with them.Finally, the control box that comes with the set of 3 is incredibly unreliable. The RGB occasionally just breaks and flashes random colours or it sets the fans to 100% for no reason. I contacted support to try and get a newer one and had no response. Now I just ignore the RGB and plug each set I have straight into the motherboard fan headers.I believe the screw hole and radiator compatibility issues have been fixed in the newer versions of these fans but it's still no excuse when you're charging this much. Ease of use is meant to be a selling point of these fans. They do achieve this in some ways but they've been a big pain in others. Definitely go for some of the more modern versions if you're set on Uni Fans.

I love these fans the setup is so much easier then corsair the less wires made me very happy I think corsair has great rgb fans and great software but the 2 wires on each fan is crazy and using more the 6 fans you need a cammander pro controller and 2 light node controllers and that's alot of stuff when trying to tidey up and keep it clean in the back of your case just saying I love the lconnect software and love the fans there so quite and they look so good I have nothing bad to say about this product and no I'm not getting paid for this review

chegou tudo em perfeito estado, agora é aguardar + uns dias e mostrar como ficou lindo as fans no gabinete.

Simply amazing fans, super quiet under their software, they also ramp up super high on a custom fan curve, not to mention how gorgeous they look, they are very well made, sturdy, and so easy to link together, please, PLEASE, buy these, they will blow you out the water.

fantasticas

The media could not be loaded. Achetés (x7) pour monter un nouveau pc et installer tout ça dans un corsair 5000D. Si j'avais su, j'aurais même dû prendre le watercooling de la même marque au lieu d'un icue de chez Corsair. Ces ventilos sont très performants et brassent l'air dans un silence bluffant. La connexion entre eux est très aisée et facilite grandement le câble management. 1 fil au lieu de trois, c'est pas négligeable ! Le logiciel L-connect 3 est très facile d'utilisation, la qualité du produit est exceptionnelle dans les finitions et c'est surtout les performances de refroidissement qui restent incroyables. Attention, les SL v1 sont difficilement compatibles avec les v2 (plus chers). Au niveau lumières, c'est beau, rien a dire. Si vous cherchez des ventilos efficaces, avec un certain budget quand même, foncez vous ne serez pas déçu.