Keymall keyless Entry Replacement Upgraded Flip Car Key 314MHz 4D67 Chip 4B Fob Remote for Toyota 4Runner Sequoia ,HYQ12BBX HYQ12BAN HYQ1512Y

Excelente calidad. Funciona sin fallas en 4Runner 2005, yo mismo la programé, hay que llevarlo al cerrajero o a la agencia para que haga la copia de la llave, al no tener botón de descenso de la ventana trasera, no sé si funcione. La apertura de la cajuela tampoco lo programé, sólo los seguros y alarma.Hay quienes se quejan que aprietan accidentalmente los botones al manejar, no veo cómo les pasa si no estorba para nada. Totalmente recomendada!

Once I learned how to program the remote, it works, but the car alarm does not turn with the new remote...Anyone know how to get the new remote to lock/unlock and set the alarm?

I have a 06 4Runner Limited with the V8. Remote and key worked perfectly, however no instructions were included at all. You can find videos on how to program it on youtube, however if you'd prefer written (which I highly recommend due to all the steps required) I used the ones on a website called The Track Ahead; they have separate articles for both the key transponder and the remote. Just be sure you fully understand the instructions before you try, as several steps are time limited before the process resets. The remote worked first try for me, however the key transponder took two tries.What you need, and probably where others have failed, is the master key. The Toyota OEM one that came with your 4Runner is black, and this is also the one able to lock/unlock the glove compartment (mine has difficulty doing this, but works after fiddling with it). The valet key is gray and will not work to program a new key, nor will it open the glove compartment. If all you have is an aftermarket key (one without the Toyota logo) there's no guarantee that it was programed as a master key, so it may not work for you, so you'd have to get the dealer to make a new one.Getting the key cut is the easiest part, however you may need to remove the key from the remote to get this done. To remove it, flip the key out, and then pry on the back cover from where the key folds in. This will pop off the back cover, and this is also where you can replace the battery. To separate the case, there's two screws near where the key chain connects, as well as one hidden under the sticker on the back that you'll have to remove. After this, you can pull it apart. Be mindful of the spring inside the pivot of the key. Pay attention to how this assembles; you'll notice the spring is twisted 360 degrees while assembled to put tension on it and help give a strong flip when you deploy the key, so be sure to do this as well when reassembling it.That's all I got; hopefully these instructions help people get these properly set up, as it 100% does work, you just need to be patient, prepared with all the info to do it, and pay attention every step.

Works great for my 2008 FJ Cruiser, just have to disassemble the remote to get the key cut. Programming this key yourself works flawlessly and it is a great fit for my car. The only qualm I have about this product is that the panic button is very sensitive and requires a single press to activate. I have disabled that button on this remote because I was setting it off multiple times per day. Other than that, it's a great key that adds a modern touch to an older car!

I programmed the key and programmed the fob, and had the key cut for $2. Awesome purchase.