Amico Black 4.5mm Width Cable Tie Base Saddle Type Mount Wire Holder 100Pcs

These work as expected. I purchased them to place under my model train layout so I can run the cab bus and track bus lines flush against the bottom and up and down the legs where needed. However, when I purchased them, IT DID NOT SAY IT WAS COMING FROM HONG KONG. It took a month. I was really going to blast Amazon and/or the shipper, but I see now that this key tidbit of info has now been added. So my weekend project was delayed several weeks so if you need in a hurry, try a different seller. Or if you can wait 4 weeks as in my case, probably a good buy.

I bought these after an extensive search for the solution to a particular cabling job. Staples could have been used, but you always run the risk of nicking a wire or shorting something out. Then there is the tracking down the problem. You can loose a lot of time troubleshooting a short. These are neat, look professional and the risks mentioned are non existent with these devises. You can vary the number of wires just by going to a larger or smaller wire tie.

The quality of the product is just fine, there is nothing to it.The problem is the advertised size under "Product Features" is way wrong. It states they should be 15mm x 10mm x 7mm, which is what I wanted. They actually are 23mm x 16mm x 10mm, way bigger.The funny thing is that they are the same size as the dimensions in the image they provide. In some ways it is my fault for not checking this discrepancy, but regardless they have the wrong dimensions in "Product Features."Either way it is a good deal, I am probably going to keep them, but if you have a project (as I do) that requires small saddles, keep this in mind.On another note, they can be attached perfectly with a 3/16 rivet, the head fits perfectly in the counter-bore.

These, when combined with either zip ties or velcro strips, are perfect for organizing bundles of cables. I installed network throughout my house, and the central network closet and certain areas of the basement needed serious organization. When I found these, I was thrilled with them. And using them, they are perfect! Just screw them to ceiling/floor joists, studs, wherever your cables run, then insert the cable ties, and tidy up the cables. It's perfect.Highly recommend. And these are much cheaper than certain other, slightly fancier options. I wish it came with appropriate screws, though. The screws I used had heads there are probably smaller than these were designed for, but they work fine.

Worked as expected. Originally I planned on using 3m tape to secure these to the back of my desk, but that didnt hold very well so I used small screws to atach and they hold very well and have held up to quite vigorous movement attaching my cable ties through them.

worked as well as expected but you do need a small screw head size for the wire tie to feed into slots. also if you pulled too tight 1 side would break. just be careful.

Great mounts. They are bigger than they look, but I actually think that they are a perfect size. They have smooth edges so that they don't snag, and they seem tough enough.One misleading element is that the screw holes are not actually countersunk (as in, angled edges around the screw hole). On the upside, they should accept a wide range of screws.Here are the screws that I used with them:http://www.amazon.com/gp/product/B007OC47OM/ref=oh_details_o01_s00_i00A better choice would be screws with a flat head rather than countersunk screws, since these wire saddles do not actually have countersunk holes.

A great value, but if you tighten the wire ties too much, it breakers the ears out. Really designed for smaller wires and small wire ties.

These arrived on due date. Well wrapped. These mounts are excellent when routing cables/wires in small spaces (eg project boxes) or around larger items. Using mine to both route larger cables around model railway installation, but also use them within small boxes to give neat wiring runs

Good product. Had similar before and they work well. The stick on ones tend to come off, these are far firmer. But obviously you should not drill holes in pvc frames to fix them on, that is a case of using the stick on ones.

Perfect for what I wanted. Screw on and feed a cable tie through and the inside of our cupboard with our router, switches etc look a lot better. Recommended.

Used to mount cables & micro PC's under desks in meeting rooms. Keeps everything neat and tidy, also cable free with wireless keyboard & mouse!

Perfect. I bought these for securing 12 CCTV camera cables around the farm. Screw to a beam in seconds and secure cables with a 300ml cable tie. So neat yet strong, almost invisible.