O'woda Adjustable Tablet Stand for DJI Mavic 3 - Perfect Fit, Premium Material, 360 Rotatable, Lanyard Included

Well, unfortunately I chose not use this with my Mavic Air or Mavic Pro Platinum controllers. It's a really tight fit and I was afraid after several uses it might break. Not sure why someone wrote that it was loose; certainly not in my case. The other thing was the bottom of the holder would not fit flush into the USB opening at the bottom of the controller. My controllers have a tapered opening and this holder is squared off. The really good news is this company stands by their product. After a short EMail exchange, I was refunded the total purchase (shipping included) and was even told to keep the holder. While I'm sorry this one did not work for me, I would certainly consider this company for future purchases,

The holder works for a cell phone and small tablet 6 inchesor so. However anything larger the holder detaches from the controler.

Bought it to make it easier to see my phone. To me phone should be on top not bottom of remote. Makes remote little top heavy but much easier for my slightly older eyes to see phone. Wish it folded down.

Unit is 3D printed and not injection molded. This causes me to be concerned for the longevity of the part given that spring tension in the plastic is what holds this unit onto the controller. The standoff for mounting the cellphone/tablet is injection molded but glued/plastic welded to the base. This makes packing/storing the holder when not in use cumbersome.The spring loaded clamp will only hold an iPhone 6s horizontally (landscape) but because the mount on the back is off center, using the phone in this manner puts the phone off to one side instead of aligned to the center of the controller. This doesn't impact the performance, it is strictly an aesthetic issue.I use a Mophi battery pack case on my phone and the spring loaded clamp is not deep enough to firmly hold the phone in this case. If you use a case that increases phone size beyond 1.5x original phone thickness, this default mount will securely hold your phone in place so you should be careful.It is very lightweight and I like the fact that it positions the phone above and over the antennae.

Works great. Very stable clamped onto remote and and phone.

This product looks very good on the pictures, but you notice when you receive the low plastic quality, anyway the worst is that the back screw is not enough to support the weight of the iPad (iPad Pro 9.5") and the angle is not open enough to set in the position the pilot may need.

Fits my dji spark controller perfectly. Just clip it on and adjust it to your liking, and your good to go. Fits most tablets/cell phones...

…having clear access to the sticks, view of the controller and the topside controller buttons is really, really great.I use my Skyreat aluminum plate and lanyard for something more to hold onto and to safely (carefully) use a lanyard.The USB port in the controller helps keep the bracket from falling off and dropping my iPad which is to say when the drone is not in the air, you must be aware that the bracket will come off and you need to be ready to grab the iPad and snap the bracket back on.3.5

Buena construcción y fácil de armar

Entregado gracias

Je n'avais pas fait attention mais le produit à une ouverture de mâchoire minimale. Ce qui signifie qu'un téléphone par exemple en position horizontale ne sera pas maintenu car trop "fin" pour être attrapé par les mâchoires.Et si vous décidez de le serrer en le prenant par les deux extrémités haut/bas, vous ne pourrez pas accéder au connecteur de charge pour le brancher à la télécommande...C'est un support pour tablette.Effectivement ça se voit à l'image qu'au repos le support a une ouverture qui est déjà bien trop grande pour tenir un téléphone. Et dans la description la taille d'ouverture minimale est indiqué. Donc soyez vigilants.Perso ça ne m'a pas dérangé car j'ai une vieille tablette qui trainait et finalement elle a trouvé son utilité.Par contre je me posais la question pour la connexion avec la télécommande. Sur le modèle du Mavic Pro, vous avez une connexion USB-A sur la partie basse (côté mâchoire) et ça fonctionne exactement comme le connecteur Mini-USB qui se trouve sur la tranche.Pour l'application DJI GO 4 (compatible avec les appareils 32 bits car visiblement la nouvelle application DJI GO FLY ne prend pas en charge les appareils 32 bits) sachez que le fichier APK est disponible gratuitement sur le site de DJI.Je l'ai donc installé sur ma Galaxy TAB A et ça fonctionne nickel.Finalement avec cette "erreur" d'appréciation sur la possibilité de mettre mon smartphone sur ce support, je me retrouve certes avec un équipement plus encombrant mais avec une visibilité plus grande via une tablette.Le support est vendu avec un tour de coup pour soulager le poids de l'ensemble. La plaque ainsi que l'axe sont en métal. Donc suffisamment robuste. Le système de fixation avec la vis fonctionne bien. Une fois en place, la tablette ne s'incline pas avec le poids. Elle garde la position que vous avez mis une fois la vis serrée.

1A

Il supporto è di buona fattura, materiale leggeri ma resistenti (alluminio).Ottimo per dispositivi di grandi dimensioni (io lo uso con un tablet Samsung) e, una volta bloccati con l'apposita pinza, si rivela molto comoda la testa a sfera rotante che permette di regolare il tablet/telefono in ogni angolazione. Molto comodo il laccetto da indossare a tracolla in modo tale da distribuire meglio il peso.Una volta utilizzato si piega grazie al meccanismo a scomparsa e si può riporre nella sacchetta in dotazione.