VIVO 250ft Bulk Cat6 Wire, Full Copper Ethernet Cable, 23 AWG, UTP Pull Box, LAN Network, White, CABLE-V016W

Got 500' of white cat 6 to rewire my network. Easy pull, easy crimp. Getting close to gigabit speeds. Everything wired is faster/cleaner (replaced a mix of cat 5/5e/cheap cat 6 cables)

I have made about a dozen Ethernet cables now with this bulk cable and it works well in the house once connectors are attached. The most important consideration in making custom cables is a good crimping/cutting tool and I highly recommend passthrough RJ45 connectors as it is much easier to properly insert the 8 wires in passthrough connectors.

I see some reviews on here from people claiming that they can't get their cable to certify to CAT 6. I have had no problems certifying any run I have made with this cable to CAT 6. I will say that you need to make sure you care keeping your runs under 324ft, and that you are keeping these runs away from noisy electrical sources (like fluorescent light ballasts). Maybe others are getting a bad batch or something, but I had no problem with mine.

Bought this to do a run from my internet drop at the house to the home office.after some twists and turns and being shoved down some walls.. I got the jacks installed on both ends. The run is probably close to 75 ft.. I didn't measure it. Did a patch cable from the internet router to the first wall port for another 15 ft. From wall in my office to switch is another 5 ft, ish. I'm at ~90 ft from end to end.. I see 1gb connections all the way through. I just used some cheap modular cat 6 rj45's I got at microcenter for the patch cables and cheap cat 6 rated wall ports with a 110 punchdown connection I got at home depot for the home run back to the internet.The cable is stiff.. more so than is normal. Really sucks when you're terminating a lot of it... Some of it is due to the stiff jacketing. My strain relief boots BARELY fit over it.. and it's either the cable is on the large side of things, or the boots are on the small side of things. The cable being stiff made it a little more difficult running through the walls. If it was through cable tray it'd not have been an issue. The cable likes to stay coiled.. it's taken a set and that is annoying.All that said.. I cannot address the other folks comments about it being cat 6 or not. It's built just like pretty much every other cable I've had that was cat 6... I don't own the equipment to see if it's passing the correct frequencies in the test or if it'll support 10gb at 100ft... but so far every single connection I've done with it has been 1 GB.

El cable es de cobre puro!!! Muy buena calidad

I'm not a professional who works with CAT5e or CAT6 cables everyday. Just a hobbyist who's done a few runs. Having said that, this cable seems by far superior compared to other CAT6 cables I've purchased before.

I really had to pull hard on this poor cable during a tough in wall installation. I absolutely reamed on a couple 80' runs to the point of deforming the outer jacket. They work great with no ill effects. Full gig speeds. The cable did want to kink a lot so I had to babysit the entry point as I pulled it through.

The cable is a little tough to bend but that comes with the territory. Know what you're buying. On the second photo I'm showing the pass-through end connector before crimping. Third photo shows the completed cable then you have side by side cat6 amazon basic cable comparison. You can see that the cable is a bit thicker. Full copper.CSIS influenced

Compré este cable para cablear 5 lofts y un local comercial- El cable es resistente para su instalación y en cuanto a transmisiòn, no ha habido quejas en 2 años, compartiendo 200MB simétricos con los 5 lofts.Ampliamente recomendable

A good quality product. Even though you can buy cheaper cat 6 which uses copper coated aluminum. it's worth the extra to pay for solid copper. I learned more about the differences of why using copper is recommended, for a number of reasons, like where it's going to be used. Even cat5e is solid copper while cat5 is not. The solid copper in 5e makes it capable of 1000 Mbps. Solid copper cat6 is capable of up to 10 Gbps.

Very sturdy cable.

The cables have a plastic spine that separates the twisted pairs and prevents excessive bending around turns. There is also a rip cord for pulling back the jacket. The cables pull easily from the box and did not tangle. The internal wires insulation is brightly color coded and easy to punch down. Note that these cables are CM rated meaning that they cannot be run between floors due to lower fire resistance. Look for more expensive CMR rated cables for that application.Over an approximately 100 ft cable the maximum Windows file throughput is 109 MB/s over a gigabit LAN. Cables perform quite well.

Es de puro cobre, no CCA. Se trabaja facilmente. La caja es práctica. Muy buena calidad.