VIVO Adjustable Under-Desk Slider PC Mount, Computer Case Holder with Pullout Slide Track and 360 Degree Swivel, Black, MOUNT-PC01D

Arrived quickly and as described. Took a bit of tinkering to figure out just how to mount it correctly for my needs and sliding it on to the track takes a little effort so I recommend assembly without the CPU and trial positioning it to make sure you have the correct space before committing to drilling or screwing it in place.It now fits nicely above my UPS and I can slide it back to hide it away or pull it forward to work on connections in the back if needed. (Now I just need to tidy up the rat's nest of cables back there)

I read the reviews about this not fitting all computers equally well. After purchasing and reviewing the product photos I've learned that this mount isn't designed to hold a computer snuggly top to bottom but rather "squeezes" it left to right.The directions aren't clear but you will likely have a gap at the top of the computer, which is OK. The key to securing it is the side bracket/clamp. I would suggest putting two rubber pads on the lower section of that clamp (to avoid scratching) and snug it up. Doing so will hold everything securely.

This thing works great! I use it to swivel my PC under my desk and out of the way or closer to me when I need to access it for something in the back or on the side. It keeps my PC off the floor and discreetly hidden under the desk. I love it.

Solid metal, nice build quality and very sturdy.Unfortunately.it didn't fit my case, I measured incorrectly and thought my case was 8 inches, I was off my ½ an inch. I would've higher preferred this one over the otherount I had to purchase. Doesn't have the same build quality.

AVOID IF POSSIBLE!!!As other reviews mentioned, this is a poorly designed product that does not properly fit most traditional tower PC.There are two problems:(1) The width adjustments will not fit most traditional tower PC enclosures. I had to fabricate my own strap system to tighten my PC to the desk mount, however; this leads to the second problem -(2) The “base” portion of the mount is not squared (90 degrees). As a result, there is a clear SLANT even if you are able to snuggly fit your PC to the desk mount.I would have returned this product if I had not already drilled holes into the bottom of my desk. Please save yourself disappointment, time and money - look elsewhere.

me encanto

Neat Idea, and it might work for thin desktop computers. My sons computer however was a custom case for better airflow and it was too wide for the unit. I had to modify the mount to accept the computer, and while it hangs from his desk, its sightly askew and does not feel as solid as I would have liked.

The concept is good, my large heavy tower was unstable (I couldn't hit then power button without shoving it back) so I Velcro strapped it to the bracket. The portion of bracket that clamps the tower should be longer and have four screws instead of two to keep it from hinging because the holes are too close to the end, a larger platform for the tower to rest on would help. If I hadn't already drilled through my desk I would have returned it!

Se ve muy bien, le da otra vista al escritorio solo no me gusta que no se ajusta al 100%,cuando jalo la PC se mueve un poco.

Held my MATX case no problem. The slide and swivel function allows access to case from any side - a great idea. Found it to be very secure and sturdy.

Purchased this to mount a -larger- mini ITX pc under a new desk to keep it off the floor. Was relatively easy to install - you just need a drill/driver, something to mark holes, and some level of handy-person competency.It's not as study as I expected, there seems to be some small give in the portion that allows the entire unit to rotate on the track, and can give you some wobbe if you have a PC on it that's near the max-out weight. My PC weights in at the maximum recommend use for this mount (about 20lbs), so if I were to bump the PC there would be some slight wobble, but nothing that's caused me significant concern.The BIGGEST drawback of this mount is that the width of PC that it allows is in my opinion too small. I had to get creative when making this hold my PC. Will update this review with pictures eventually.For now, this does the job, but I will likely keep my eye out for a mount that better serves my specific needs - something that's a bit more sturdy, something with a higher weight rating (for peace of mind), and something that allows you to hold a wider PC with ease.

It works... kinda. There is some adjustment available but not enough fine turning adjustment to allow you to exactly fit to a specific PC case. Ending up, in my situation, being 'between' far too loose (for my liking), and not snug. My PC case now hangs below my desk at a slightly rakish angle, both horizontally and also vertically. So, if your goal is to get the PC up off the ground, and attached to the bottom of your desk - I have a sit/stand electrically driven desk. Then this will work for you. However, if you are an engineer, or someone with OCD (Q: how many engineers also have OCD? A: All of them.) it's going to drive you nuts! Thank goodness it's under the desk and not seen - out of sight... etc. Damn it! I can still see it there... mocking me.

Exactly what I've expected