VEVOR Sonic Cleaner 1.3L Professional Sonic Cleaner with Digital Timer 40kHz Excellent Ultrasonic Cleaning Machine 110V for Jewelry, Watch, Ring, Coin, Diamond, Eyeglasses

Works great with a few tweeks, Setup and testing and prep. takes an hour or two.The spacer disks will have to be cleaned up and finish sanded to remove debris from mfg.cutout prosses. I also made label protectors from silicone 1/16 sheeting.First mod was to cut the lid with a dremmil and cutoff wheel so it would fit with the motor installed.2nd mod was to replace the 24v motor wall wart with a 12v 1amp walwart, as the 24v rotated the motor way too fast.3rd added a bluetooth wired bbq type temperature probe.Cleaning solution i finally settled on was Distilled water, 2 caps of the iSonic fluid "blue" ,2oz of X100, ipa 100% home brew premix concentrate.Premix = 1gallon distilled water, 8 to 10 caps of X100 and 10 to 12 caps of 100% ipa. Shake the hell out of it , this will desolve the x100, let it settle to defoam.I run a 12 minute cycle with machine set to 28c. And a preheat to 86f. realtime temperature on the inkbird probe.I run 3 albums at a time, to center 3 albums in the wash basin load 3 spacers to start then a album and 2 spacers between each album with a silicone protector on each side.The last spacer is a single. This centers the 3 in the wash bin. Pre sweep each record with a lp dust brush. Inspect each lp for pressing defects.Post clean , lift the motor and drip dry for 10 minutes with a fan blowing on them then 10 minutes in the included drying rack.This method yealds spotless results and cleans all but the worst finger prints. With no water spots and fast air drying. Heavy soiled and fingerprinted albums need to be pre cleaned. No way around itDont freak out when your fluid gets cloudy before you clean anything. I clean 30 or 40 albums or more on a fluid change.Noise? Yes it is noisy. You wont want it in your listening room. If its in an adjacent room with the door closed you wont hear itIts significantly quieter while its spinning albums in the fluid. Louder while empty or preheating with the agitation motors running as this helps speed up preheating.Agitation causes heat.Overall its a very good value considering the motor with slide is all cnc aluminum and very nice. The included drying rack is nice and solid. It comes disasembled and requires assembly and adjusting. It has 4 arms that can rotate and slide. Wider is better. Its kind of fiddely so multiple adjustments may be nessisary to get it right.Its really awesome once its propoerly adjusted. If your record is leaning its not adjusted rite.

I've had this ultrasonic cleaner for quite a while now and I have been very satisfied with its quality and performance. I had my doubts about this type of cleaning before purchasing this machine, but everything I've cleaned has really impressed me how well this method of cleaning works. The price was very fair and shipping was very fast. As long as you follow the operating instructions this machine should give years for great service.

I used this unit and liked it quite a bit until after about 12 uses, it shut off and would not function any longer. I used it to clean pistol parts, so I ran it a maximum of 2 times per week for about 6 weeks in 15 minute intervals. I used heating and the ultrasonic cleaning, maybe that was too much for it. It worked well, but suddenly it shut off in the middle of a cleaning and would not turn back on.The rear power switch still worked based on the light in the power switch coming on, but the front panel just stopped working - no lights or anything. I unplugged it, let it cool down, and tried again, but nothing. I returned the product for a refund and I'll be looking for something a little more well made. Maybe I overworked it? Not too sure but definitely something to keep in mind if you plan on using it fairly frequently. I was outside of the return window by about 2 weeks but Amazon helped me out and extended the return window.Something else to note - the tray that holds the cleaning solution is not removable, so emptying the unit and cleaning it can be a bit of a hassle because you have to take the entire unit to a sink rinse the tray from there. Its not a huge deal, as I am not sure it would work as well if it did have a removable tray, but something else to keep in mind as the unit is not small.

The media could not be loaded. I was not expecting it to be as loud as it is, but it still does the job. At work we have some high-end ultrasonic cleaners for our equipment, and they are much quieter so that was my expectation. But for a cheap little guy, this is as good as I probably should have expected. I don't know if the video really captures it but there's a pretty high pitched tone, you'll definitely want to have this running in another room...All of that aside, it works great! I added a little dish soap and white vinegar to the water I filled it with, and my brass casings came out shiny clean. I expect it to be even better with the specific brass cleaning solution I have coming. I also threw a couple greasy bolts and nuts in just to test them out (not pictured) and they were completely clean!I need to play with it a little more, after one cycle. I couldn't get the temperature setting to work. It stayed hot, but I couldn't turn it down. I turned the hole machine off and unplugged it, I'll have to see if it works when I try it again. But overall, it does the job that I bought it for, so I'm pretty happy and plan on cleaning everything I can with it.