Music City Metals22701 Cast Iron Burner Replacement for Select DCS and Lynx Gas Grill Models

These fit my 20 plus year old Lynx L27 perfectly.They are an inch shorter. This does not affect function. My entire surface heated uniformly. The heat shields and briquettes distribute the heat. Not the burner.They light completely once the heat shields are installed. Contrary to other reviews uniform lighting is not an issue.Look forward to see how long they last in comparison to the brass burners that came in the grill.The holes on the crossover aren’t drilled. And I did not drill them out. Once installed and heat shields installed the burners have no problem lighting completely. I don’t see the “not drilled” holes as an issue. And in fact prefer them to not be drilled.So far so good! A perfect replacement.

Not exactly like the original burner that came with my Lynx 27" grill. This one is shorter by close to an inch but I'm not yet sure if it matters since the last inch in the grill is covered by the back row of briquettes. Also note that this has less holes than the original part. The center section on the original part had a row of holes across whereas this one does not. Not sure if this matters at this point but I sure would have like to have those holes for an extra hot section of the grill. This is a cheap knockoff but at ~1/3 the price of a replacement from Lynx it's not bad. My Lynx burners had a life of about 16 years and I expect these to last at least 12 years, if not more.Also note that the replacement takes about 1 minute. Take off the briquette holder to access the burner. Lift up and push back slightly and the old one disengages. They new one gets placed in on a bit of a tilt, level it out, then push forward. That's it! Had I know that it was this easy I would have replaced the burners years ago.

I have a very old Lynx grill, but it still cooks like a dream. I have the 26 inch Lynx. I recently had my grill cleaned and had to replace the burners with these. At this price, you can afford to replace these every few years. I have cooked on this Lynx for over 15 years, This is my 3rd set of burners. I had no problems with the fit as some others have mentioned. The combination of the cleaning and these new burners make it seem like a brand new Lynx. It looks like I'll be cooking for another decade on this grill. The replacement cost for this grill and side burner is well over 5 grand. My current grill is a sunk cost. These burners help me avoid spending 5 grand on a new Lynx. I still love cooking on this thing.

I purchased 3 of those in 2015 after my OEM burners ruined in mere 5 years. They fit perfectly for my Lynx L36R1NG grill. Last week I order 2 burners with the assumption that, after 3 years, those third-party burners would be oxidized. This weekend I opened my grill to replace the 3-year-old burners, to my surprise those burners are still in very good shape! It looks like, I would definitely get one or more seasons with those and I will keep the ones I ordered as spare for future.So, bottom line, you can not go wrong with those burners especially with this price range.

My old burner was rusted out and flaking off big pieces of rust. Finally got tired of it and purchased the replacement burner for my DCS grill. The replacement burner was easy to install and had no issues. Has been working great for about a year with even flame distribution. We use our grill at least once per week.***Update- Had this burner for a little over a year. Rusting out pretty quickly and not burning evenly. A lot of holes clogged. Ordering a replacement from bbqparts.com It is $12 cheaper delivered.

The product is just like described by other reviewers. About 1 inch shorter, but still works fine. At first it didn't seem to have much gas flowing and it was hard to light, but once it burned for a little while it really picked up. These are made in China, so the price might change once the Trump tariffs affect it.

I replaced both of my original LYNX cast iron burners with these Music City Metals 22701's and not only do they work as well as the originals, but I swear that they produce more heat than them also. Saved a lot of money buying these instead or the LYNX replacements and I'm very happy with there performance. Great product.

These work great ! They are slightly short to the back of the grill by about an inch or so but thats not a big deal.Even heat distribution. These are cast iron so they probably won't last as long OEM bronze units but @ 1/3rd the price ? No brainer.

Works perfectly. Seems equal to original unit.

This is a totally unusable product. The holes aren't even drilled so the burner won't ignite the right side.

All the holes not drilled out and there is no flame crossover so when lit only one side of burner will light so the other side of burner just dumps raw gas!! VERY DANGEROUS!!

I good reasonable replacement part for my Lynx BBQ. Slightly different updated design. Fits and works very good.

I replaced a rested out prior burner.

I have a LBQ36 and found the burner to be a little bit shorter by about an inch and also it is not as high. This causes the briquette pan to tilt down slightly at the rear. Otherwise, it does seem to work OK and is worth it considering the money saved against buying the exact part.

I have a 25 year old built-in stainless steel DCS grill that I love. Noticed one of the burners was rusted out from years of grilling while cleaning & really didn't want to pay $2,000.00 for a new grill. Found this exact match burner on Amazon. Changed it out in less than a minute & I'm back to grilling!