VMEIAnti-Theft Doorbell Door Mount Compatible with eufy Doorbell S330 (T8213) (Battery-Powered),Metal Mount Made of High-Hardness Stainless Steel,No Drill,Not Block Doorbell Sensor-Silver

Works perfect and very sleek

First off, this product didn't ship until 20 days after I ordered it. It arrived quickly once it did get into the mail system but the delay had me hopeful it would be worth the wait.I bought this device because I live in an apartment that doesn't have anything in the lease forbidding this device, as some do. It's easy to lose packages to thieves and they have mis-delivered my package to the wrong place multiple times. I wanted a way to have proof and feel more secure/safe. Because I can't mount a doorbell into the wood here, this was the only mounting option I have that, supposedly, won't just let someone run off with the camera and footage since it stores locally if you don't have the homebase.SO... THE ISSUESThis kit comes with 2 different types of screws; 6 shorter screws with a wide(r) diameter head and 3 longer screws with a smaller diameter head. The long screws are about M3 5mm size screws and the shorter ones are probably 3mm or perhaps 5mm that were cut poorly, but they seem to be smaller than M3 size. The instructions are not clear where to use the different screws. It's just pictures showing the same screws.3 screws mount the metal plate to the clamp and 2 screws are used to mount the plastic eufy mount-plate (which comes with the eufy doorbell) to the metal plate in this kit. The longer screws are too short in diameter (of the head) to hold the plate, and they are too long. They would go through the back of the plate into the rubber part that sits flush against the door and would make it not sit flush.The eufy plate has a "V" shaped opening so it gets narrower the closer to the metal mount it gets. The idea is the screw head would sit down into the V-shaped cup and tighten. The issue is...The wide diameter screws are too short to screw into the metal plate. The head of the screw is too wide and sits higher in the "V" meaning only about 1 thread of the screw can screw into the metal plate. It's just not strong enough and the metal strips as you can see in one image because the screw is trying to hold the plastic eufy plate to the metal plate with 1 or 2 tiny threads.Then, the screws dig into the plastic eufy mounting plate as can also be seen in the image damaging it.The longer screws are too wide to fit into the holes that hold in the eufy plastic plate to the metal plate and would actually push through the metal plate if they could fit because of their length, but the short ones are not strong enough because they can't get deep enough into the plate to secure the metal plate to the clamp. This is shown in another image.Therefore, the only conclusion I can come up with is that the 3 long screws were meant to hold the metal plate to the clamp and then stick through a little on the other side, meaning the eufy mounting plate can't sit flush on the metal plate.I had extra small M3 5mm screws that are more precision milled for computer components that I had extra of. They have about the same diameter head as the longer screws in this kit, already being used to hold the metal plate to the clamp. My better quality ones fit into the mounting holes, but are just barely big enough when sitting in the V-shaped cup of the eufy plate to secure it. If I grab the doorbell, I could still tear it off this mount with ease.It is IMPOSSIBLE to put together with the included screws. So just stop now, do not order.The screwdriver that is included is also too long to properly angle into the screws and easy can strip the screw heads because you are forced to tighten at an angle. I have other screwdrivers and flexible ones so this is not a big issue for me, but is completely stupid that they included it without making it shorter.If you have your own screws you probably could get it to work. I have a lot of small M2 M2.5 M3s and other screws and even then, what I have just barely works and doesn't provide much confidence that my doorbell can't just be stolen as well.Be prepared to use your insurance when your doorbell is stolen... or just mount it into the wall. Unfortunately, I can't do that at my current residence.This kit needs different components to work with the Eufy S330 which it is advertised to work with.Edit: The images posted show the metal plate in the upside down orientation. If you flip it, the metal cover does cover the pinhole. But, the screws that secure the plastic eufy mount to the metal plate being the wrong size, or incompatible, still make this product a 1/5 and honestly I would go less if possible.If they change the screws in future distributions, this could change significantly.Wasted 25 bucks

The media could not be loaded.  It was easy to install and does its job perfectly. I used for sometime and banged the door many times. Neither the bracket nor the camera moved. It’s perfect when you don’t want to drill any holes on the door to install camera. My doors are not perfectly sealed for AC. So this bracket did not make any sealing worse