GlowShiftReplacement 2 Post 30 PSI Fuel Pressure Gauge Sensor Sending Unit 1/8-27 NPT Thread

Works well when it works, but a eems like I have to replace it yearly. Almost at the point I need keep one on the parts shelf. Going to try and find an alternative before the new one goes bad. Gauge has worked great, but these sending units aren’t of lasting quality.

I installed this on a Dodge Cummins to monitor the input of the VP44, with the recommended snubber. I noticed the fuel pressure dropping after a few months, so I changed the filter. It didn't really have an effect, so after exhausting all other options, I increased the pressure on the lift pump regulator. I wanted to keep it above 15, so I set it to about 19. After a another month or two, I pressure was down into the danger region, so I increased the pressure again, and ordered a new transducer. In December, I replaced the transducer, didn't change anything else, and the pressure reading was at 28 psi. I lowered the pressure down to 19 again, and my truck started running better. Well not it is February, and my fuel pressure is reading low again. Now I don't know whether or not to believe the sensor.Please be aware of this issue, I am looking for options. There are warnings that during startup, the VP can kick back higher pressures. It seems like the snubber should stop it from messing up the sending unit, but apparently it can wear out pretty fast... 2-3 months?

The first Sender I got a year out of, 2nd one I only got 3 months, Just ordered another one which WILL BE MY LAST, I will find another brand to buy, NOT HAPPY with this brand.