Pyle 2 Way Custom Component Speaker System - 6.5” 400 Watt, with Electroplated Plastic Basket, Butyl Rubber Surround & 40 Oz Magnet Structure - Wire Installation Hardware Set Included - PLG6C, Yellow

Got here quickly, kudos to Amazon and fed ex for the super fast delivery I ordered it last Friday evening and received it today, only 2 business days!! Amazon even sent my phone a text message once they confirmed that it had been delivered. These speakers are not the easiest thing to install so if you do not have any experience installing stereo equipment I would push you towards a standard set of 3 or 4 way speakers.. if you know what your doing these speakers are pretty straight forward if you have any knowledge of stereo systems or even common sense. the difficult part is getting it to look good and hide the crossovers (assuming you want to hide them)... now to the product itself.When I opened the box it smelled of Chinese plastic.. these are made in china like everything else. but their build quality is fair/good speakers feel pretty rigid and I see no problems with them holding up for years under normal use.. but on those hot summer days I would be careful not to crank it up too much the plastic seems to be the type that could warp under high heat and movement... unfortunately there is no room in my garage so my install was stuck to the outdoors and being April in Oregon my install was cut to a halt after the first speaker due to me getting soaked in the rain (I have a small car.. not much room to install door speakers with the doors closed)Anyway the side I did looks clean and professionally done and has the sound of a more expensive set these speakers perform at the same level of a 70-80$ pair of speakers from brands like sony, pioneer or kenwood.. keep in mind they are no infinity or kicker but do sound very good and are just about the best bang for the buck you can get!!!Ohh and to the people complaining about the wire that comes with the speakers... the wire that comes with it is thicker than 90% of cars stock audio wiring.. so unless you plan on replacing ALL the audio wire putting larger gauge wire to the speakers is a complete and total waste not to mention these are only ~50 watt RMS speakers you don't need 8 gauge subwoofer wiring to make them work the smaller wire works just fine and they give you more than enough to suffice.I'm very impressed with the improvement of the overall sound quality of my system with only one speaker.. the tweeters are loud and have a good range and can get very loud if you set them up for it and the woofers make a good deal of bass it wont replace a sub but for someone who listens to less bassy music it will do well.... I'm excited to install the other speaker and am anxiously awaiting my pyle audio 4 way speakers for the rear!!!! kudos pyle you guys have come a long way in the past years.So far I'd recommend them to anyone.*UPDATE*Got them both installed and took out my old rotted out rear speakers and these things sound awesome... excellent bass.. far more than expected. At half volume they can vibrate my rear view mirrors to the point they distort and the tweeters hit every high you throw at them... this set is a very good buy!!!

I like these A LOT, but they are not perfect. For the money they are hard to beat. I replaced the component speakers in my 2005 GMC Yukon with the Pyle 2-Way Component system. If you are handy, you can install them, but this is not a drop in installation. Opening the package, the crossovers look very nice. MAKE SURE TO USE THE CROSSOVERS! Otherwise you will get to much midrange and blow the tweeters. In the GMC, I removed the door panels, removed the old woofers. The old woofers have integrated custom mounting hardware, but the 6.5" Pyle woofers fit perfectly. I used self tapping sheet metal screws to mount the speakers.I wired the crossover and mounted it to the inside of the door PRIOR to mounting the woofer. Since GM runs the stock woofer at full range you can use those wires for the crossover input (see polarity chart for GMC below). MAKE sure the polarity is correct or one speaker will simply cancel out the bass of the other. Just because they work does not mean the wiring is correct. I then removed the tweeter from the door. I cracked the two small tabs holding the tweeter magnet and pried the magnet from the front of the tweeter. I then mounted the Pyle tweeters to the front of the old tweeter and remounted it in the door. Note: this will destroy the old tweeters. I mounted everything back and they sounded really good.Bass is better than the stock system, high end is MUCH BETTER. I can almost run the EQ flat on my stereo and get nice sound. They play nice and loud through my Alpine in dash stereo and no external amp. With a subwoofer it would be a pretty awesome system as they tend to buzz a bit at very high levels with lots of bass. My guess is they go down to about 50 Hz or so. They will not THUMP but you will crystal clear highs, nice midrange and some nice bass at moderate levelsLeft Front Speaker Positive Wire (+): TanLeft Front Speaker Negative Wire (-): GrayRight Front Speaker Positive Wire (+): Light GreenRight Front Speaker Negative Wire (-): Dark Green