Cup Mount Holder 2-in-1 Tablet and Smartphone Adjustable Swing Cradle with Extended Cup Car Mount Holder Kit for Apple iPad iPhone Samsung Asus Tablet Smartphone - Black

The "iKross 2-in-1 Tablet and Cellphone Adjustable Swing Long Arm Cup Mount Holder Adapter Car Kit" arrived on time and was safely packaged for delivery. The actual product box was designed with the look and feel of quality written all over. Inside the high quality box featured an easy to follow instructions with detailed color photos printed on heavy paper was definitely a nice touch. It doesn't end there. The product overall appeared to be of high quality which I find surprising due to it being manufactured in China. No disrespect, but... The adjustable parts moved freely; yet remained tight and secured when needed. It contained two simple to install adapters for use with smartphones or small-to-medium tablets. There are no noticeable burrs or other manufacturing defects anywhere to be found. The heavy plastic were smooth and solid to the touch. The adjustable cup base and adjustable ring dial was simple to use, as it provided a tight fit in the cup holder. The adjustable arms was simple to adjust and provided the perfect secured angles for my iPhone. Installing and removing the smartphone from its dedicated holder was quite simple due to the spring loaded foam rubber lined arms which proved a delight to use. The smartphone held steadily going over rough roads at high speeds with ease. If you're looking for a smartphone-tablet holder (small-medium) and want to utilize only the cup holder, then I'd definitely recommend this iKross product without hesitation.

This cup holder Cell phone / tablet mount has worked great for me in several cars. As long as the cup holders are not too far back in the center console it works great. I have not had a problem with it wobbling around or anything like that. The swivel arm is one piece, and the other piece that connects to the swivel arm is the piece that actually holds the device. This holder comes with a tablet piece meant for holding tablets, and a cell phone piece meant for holding cell phones. The cell phone holder is not very easy to operate with one hand--you really need two. But, I mainly use this mount for my tablet anyways and that mount is easily used with one hand. The mount is able to hold my Samsung Galaxy S2 tablet no problem. It also expands to its advertised diameter allowing it to fit in many cup holders, large and small. Dimensions can be seen in the photos I have uploaded. Pros: *Cheap *Easily installed *Fits a lot of cup holders *Fits a lot of phones and tablets Cons: *Cell phone holder is not easily used with one hand (-1/2 a star) Additional Considerations: If you need a call phone holder, you may want one that is better suited for one-hand use. Also, be aware of where your cup holder is in your car. If its too far back or something is above the cup holder, it may block this from being usable. Overall: 4.5/5 stars (>=.5 rounds up, <.5 rounds down) => 5 stars If you have any further questions regarding the product in my review please leave a comment below and I will get back to you as soon as possible.

This is definitely one of those "glad-I-bought-it" "no-buyer's-remorse" purchases. Fundamentally changed our 3-4 hour weekend drives to Lake Tahoe. Now we -- rather than the terrain of the road -- determine when we want to let the kids watch a movie to have a little grown-up time. The device works rather well. It expands to fit snugly in a standard cup holder. We have no problems with shifting or vibrations (I was worried about this) even on windy mountain roads (paved). All adjustments work well. We use a rubber cupholder insert (came with car). It's great that we can pull the whole contraption forward from the back seat to make entertainment adjustments without having to dismount the iPad or iPhone. The devices that mount to the seats would be more difficult. It does require cup holder that has an actual full circle for it to sit in (or a full-circle rubber insert) to work properly. We used an insert that came with the car to put it in our "double cup holder" behind the center console with no problems. It would not otherwise have worked in these holders, though. Be careful and do not force as you're figuring it out. I snapped a piece of plastic that locks the mount securely to the stick when first assembling. It was user error, but the instructions are not that clear so just be careful. It still works well enough that I don't plan to replace. The best part is the improved quality of our family outings, though. Yes, we have family time. But when we DO allow the kids to watch a movie, etc., it's far more pleasant. No more iPad falling off the precarious perches we tried to set up before so the kids could both see. No more kids screaming, "The iPad fell down again." When we gave up and asked one kid to hold it, there's no more whining, "My brother isn't pointing the iPad to me -- I can't see." No more incessant turning around to pick the iPad up or adjust it on its precarious perches. No more, no more, no more. Just more time to talk to my wife and relax for a little while.

Have you ever said 'if they only made a product that' well this is one that fits the bill. I have been looking for a reliable method of holding my tablet and/or smart phone for easy access in my Jeep GC and this is it! It's sturdy, light, compact for storage and can be installed or removed in seconds. I have two cup holders in the console and was concerned that it may not fit the larger one forward where I wanted to mount it but with a few turns it was snug in place. Two spring loaded adjustable holders are provided, one for a phone (clips on sides) and second for a tablet (clips top to bottom). I keep the tablet holder mounted and use for both my iPhone and iPad. This may not work for all as the tablet mount will cover the speaker at the bottom. Not a concern if you have blue tooth in your vehicle and play through the radio. I am impressed with how reliably it holds devices even over rough terrain. This is one product that works as advertised and I am very pleased with that as so many products do not these days. I would definately recommend for purchase.

I must start by saying this is a very sturdy product. I have a 2014 Avalon, and it fits in the cup holder tight and snug. That was the first thing I wanted to observe right out of the Box. The actual device holder is also very good and sturdy. I started out testing it with my galaxy 10.1. Surprisingly it held this monster of a tablet very well. It really fit nicely. But the 10.1 is a little to big to be driving with all that screen looking back at you. Here (with these next two devices) is where this stand excels, and turns your vehicle into an airplane cockpit. Not gaudy, but just right for the amount of "screen" looking at you while you are driving: and that is with the Nexus 7 and/or Galaxy S4(those are the two devices which I have and use for this mount) (I suppose the smaller ipads would be fine also). The device cradle holds these two gadgets perfectly, and can be positioned for driver only/driver and passenger viewing/ or passenger only . The viewing really excels with devices in that nexus 7/ galaxy S4 range. With all new cars coming equipped with Bluetooth/USB and Auxiliary jack inputs, this mount creates an exceptional ergonomic experience for use of today's Mobil devices. I highly recommend this product.

When you think about it this is a pretty sorry concept, designed to work in as many situations as possible while being reasonable in terms of cost and size and weight and complexity. In short, it's a series of compromises and guesses that nom one in their right mind would purchase. Unless it was a necessity. In which case it's a godsend. But you still have to make all those compromises... So, you are giving up a cup holder; my car has only 2, so now i'm down to 1 and it's the one further from my seat. It's decently stable given that it's pressure mounted and designed to be easily removed; so it's stable but not really all that solid. And because it's kind of long, there's a fair amount of torque from the top. There's some capacity to adjust angle and height, but not much, so it will depend on your car's cup holder position and your height and your tastes as to whether your phone or table it positioned properly. The phone holder would work decently for an older smaller phone. My phone is more stable in the tablet holder. Putting it in and taking it out fine handed is just ok, not great. Between my car's design and my phone's (small car -- Smart -- large phone -- iPhone XS Max) the car's own integrated phone holder doesn't fit my phone and there's nowhere to prop it up. Using this mount is decent but it blocks some to the dash controls and the radio and it takes some fiddling to run a USB wire to the phone. I have ordered a bespoke mount for the Smart from an outfit in Taiwan on eBay whose command of English makes you hope that tech is their strong suit. We'll see if that's better. Meanwhile, this does a decent job of an essential task given the engineering challenges it faces.

Although I am giving this product five stars, this is not a one size fits all in my opinion. I received mine today and my first impression is that it is heavy duty and well-made, however beware it may not work well for all cup holder configurations. If your cup holders are to the sides of each seat and closer to the seat back I think it will be at your elbow if you drive with your seat forward. It works well with my 2016 Honda Pilot (see photo) because the cup holders are closer to the passenger seat, toward the dash and one behind the other, coupled with the fact that I drive with my seat extended all the way back. In my opinion if there was one more adjusting pivot point, just above the base, it would have allowed an attached device to be able to come closer to the driver. As configured with only one pivot point with a vertical post, you can only adjust the angle which moves the device away from tall users. Don't know why they included a phone clamp when the tablet clamp seems to work with both devices because the tablet holder has one side that rackets while the other side is spring loaded. I bought this to replace a similar holder I had purchased from Amazon, and it is still going strong, but this one looked sturdy in the picture and I am not disappointed. Also, the one I currently have does not support a tablet. My only concern is when my wife is in the car with me she occasionally knocks over the previous holder and this one being less flexible I fear it may not give and would break.

I normally don't write product reviews because most of the products I buy are pretty much as expected since I do a lot of research before I purchase (and some other products it's not worth the time to write a review). This product is wonderful and exceptional. I am very happy with this purchase. It is very good quality, it fits in regular cup holder and it DOES FIT in D shape holders. I was afraid it wouldn't when I changed cars but it fits all and still steady: note that you DO HAVE to regulate the base to make it larger for the D cups but it will fit the D shape. It is also the only product I found at the time -last year, now there are a few more, but more expensive- where you did not have to stick a sticker or velcro to any part of your car or car window and also the only product that did not use suction cups which are not sturdy and do leave halos. Therefore this product is excellent. I also find that the extensions that hold the cellphones and tablets do work as described. Again you have to make sure the part clicks in place and adjust it to an appropriate position. However, I do agree that it depends on where the cup holder is whether it interferes with driving; I use put in the passenger center/console holder and it does not interfere this way. I highly recommend the product; it's an excellent value for the price. EDIT: I purchased a second one fro my father as he loved it when he saw it. Keep making it iKross it is truly the best for those who don't want suction or adhesive.

)

Stavo cercando un porta cellulare da auto che non avesse le odiose ventose e nemmeno l'attacco da inserire nelle prese dell'aria (quelle della mia Prius non ne consentono l'uso) e mi sono imbattuto in questo accessorio e devo dire che sono pienamente soddisfatto. Una volta fissato al porta bottiglie tramite un ingegnoso meccanismo che si allarga fino a quanto necessario il cellulare è immobile e non traballa. Una volta ho provato, più per curiosità che effettiva necessità, anche con un iPad ed ero convinto che non avrebbe avuto la stessa stabilità per via del maggior peso e invece mi sono dovuto ricredere. E' anche molto veloce da installare e questa è una cosa positiva perché se non si deve utilizzazre consiglio di toglierlo in quanti potrebbe essere di intralcio nei movimenti quando è inutilizzato in quanto, essendo nero, al buio non si nota e ci si sbatte spesso. Almeno, per dove è posizionato nella mia auto, magari in altre auto non lo è.

Mit dem Handy/Tablethalter bin ich sehr zufrieden. Benutze ihn für ein Samsung A7 Tablet. Hält das Gerät gut fest und die Verstellmöglichkeiten lassen sich sehr gut anpassen. Falls sich der Getränkehalter direkt unter dem Radio/Klimaanlage befindet, ist er nicht wirklich geeignet, da man sich sonst gerade mit einem Tablet sämtlich Bedientasten versperrt. In der Mittelkonsole dagegen passt er dagegen super. Verspannt sich mittels Drehung an den Wänden des Getränkehalters und hält bomben fest. Der Kragarm des Halters schwingt gewichtbedingt bei einem Tablet mehr, als bei einem Handy. Es ist auch ein 2. kleinerer Halter für das Handy dabei, den man aber nicht wirklich braucht, da der größere von beiden sehr gut verstellbar ist und bei meinem Gerät Samsung Note 10plus ebenfalls sehr gut hält. Die Verarbeitung ist sehr hochwertig und wirkt äußerst stabil. Kann diesen Tablet/Handyhalter unbedingt empfehlen.

Le système de fixation est très efficace. Les 4 parties s'écartent ensemble et le revêtement assure une bonne prise. Pour les portes-tasses asymétriques, une barre de mousse permet éventuellement de caler le tout. l'articulation est crantée, il est donc inutile de serrer pour que le système se bloque. les 2 pinces fournies semblent costaud. Je n'ai pas essayé pour un portable mais ma tablette 10" tiens très bien en mode paysage. La partie supérieure est fixe et le bas est a ressorts. C'est très pratique. On peut mettre en place. ou enlever la tablette de son support avec une main.

Very comfortable