Yamaha Grip Assembly, #2C0-26240-00-00

Best cheap Mod I have done for my MT-03 less throw on the throttle. A plus is also same grip design as the current MT-03

Item works as described by other upgrading to this. My ride atm is. 2024 R3 and I felt the difference from the start.

Fantastic product. Grip is nice, I don't particularly care to have matching grips so im just going to keep using it for a while. The install took around 30 minutes, the grip itself was easy I just took way longer to adjust the throttle cables after so it wouldn't stick while turning. But it was my first time messing around with cable adjustments.Slides on and is a perfect upgrade if you want less range of twist on the throttle. Help quite a bit for higher speed cruising, and especially blipping throttle on downshifts. Helps for easier/quicker starts too. Highly recommend.

love the 1/4 turn throttle on my hayabusa

This is the best budget mod for your MT03/ R3. It makes throttle response much quicker and much easier to rev match when down shifting. I'd recommend it to anyone looking for a quick upgrade. I believe these may also work on the MT07/ R7 platform as well.

Easy install wanted to change the way the throttle response is on my R7 and this works perfectly.

I am using this R6 throttle tube as a replacement for my stock FZ-07 throttle tube. My research showed this is a 70 degree turn to full throttle, whereas the stock fz-07 tube takes 90 degrees to reach full throttle. 1) I really like being able to comfortably reach full throttle without having to re-grip or really bend my wrist. 2) Makes blipping for down shifts better/ easier. 3) For clutchless upshifts, you don't have to chop throttle as much. I know this sounds crazy, but I noticed my blipping and upshifts were cleaner and easier across the board after putting this tube on. No negatives.A note to those of you putting this on an FZ-07. I maxed out my throttle cable slack on the throttle body side adjuster, and was a half turn shy of maxing out my adjustment on the handlebar side. As it is I have same amount of throttle free play as before, but it was close.I also noticed this tube doesn't have as much up/down front to back free play as stock tube. Every time I hit a bump or bumps with the stock tube, it would rattle in my hand. This wasn't dangerous, and didn't affect riding in any way, but it was slightly annoying. This throttle tube reduced this a little bit. What may have caused the tube to rattle back and forth 3-4 times, now it's only 1-2 and they are smaller rattles/jiggles. This tube should have been one the fz-07 from the factory. That being said, if you don't find yourself being annoyed about not being able to get to full throttle, don't bother with this tube.

Installed it on a 2024 MT-07. Makes the bike feel snappier and responsive. Really good mod to do. Will probably replace the grips later but for now I’ll just use the one that came with it. Takes like 10 minutes to install.