Klvied 20FT Sectional Flag Pole Kit, Extra Thick Heavy Duty Aluminum Flagpole Set, In ground Tangle Free Flag Pole with 3x5 Polyester American Flag and Golden Ball, for Residential

The media could not be loaded. I have had this 25' flagpole up with two 3'x5' flags for a month now and it is still standing. I live on the water on a bit of land that just out into an exposed bay. The fall weather and frequent storms bring the wind. The last few days we've had the winds on the tail of a nor'easter with gusts up to 50 mph or more. As I'm writing this the winds are increasing and a piece of furniture just blew over but the flags are still flying! This gets 2 thumbs up from me.Edit: We had a Nor'Easter blow through here the other day on the anniversary of Sandy. Winds up to near 80mph. I took the flags down when the flagpole was flexing past >20°. It is still perfectly straight. This was a good buy.2nd Edit: Nearing the end of November and it is still standing! We've had a few more big storms blow through here on The Great Bay. The flags are still flying and the flag pole is still perfectly straight.

Love my new flagpole. Was pretty easy to install with the aluminum sections. Seams to be a bit flimsy but has held up pretty well with a lot of very windy days we’ve had

I have a mixed review of this. I bought this pole in May. It was somewhat confusing to assemble, because the sections of pole are tapered. I would recommend putting number decals on each section, to coincide with the parts list and installation insructions. I concreted into the ground, and put a solar led light on top. To keep my flags illuminated at night. The flag and pole itself are top notch, and have withstood a tropical storm, and a hurricane recently. My only complaint is the rope that the flagpole kit came with. My flags were on the ground this morning. The rope completely dry-rotted, and broke. After only 3 months. When i say rotted, i mean badly. I could snap it by hand, and it would disintegrate. Other than that, i highly recommend the product. And the optional solar light. I bought American made rope, and my flags are flying agin. Just in time for 9/11.

So I've had a flagpole at our old house and I did the same thing with this one. First I ran a self tapping screw through the plastic sleeve into the aluminum pole to hold it in place (this stops it from being lifted out in heavy winds). Second I only used four sections as opposed to five - so it's 16' tall, plenty tall for a 3x5 flag. We've had several 30+ mph winds come through and it holds up fine. I did the four sections because my old flagpole at our last house and had a 4x6 flag on the 20' pole - it fell over in a wind storm and bent one of the sections so I put it back together with only the four and it held together for years with the 4x6 flag. Figured I'd just do the same with this one and it's working great. I gave four stars for install because the sections aren't labeled and you need to assemble in a specific order - I guessed - also, there are a couple where the poles are inside another so you need to look carefully.

Assembly and install went as expected the rope that came with it wasn’t very good and the carbines included are not very strong I Replaced the rope 2 as well as carabiners weeks after putting it up I was expecting better quality the flag supplied started unraveling within the first week of flying

The item was listed as "in stock" when I ordered it, with an expected delivery date of 3 to 10 days. The item was not even shipped for 17 days after the order was placed.Additionally, in the top feedback listed on Amazon, it says that it is made in the USA. It is made in China, and the parts other than the pole itself are all very cheaply made and it is obvious that the product will not withstand a year of service. The rope is cheap nylon that is already frayed, the pulley is cheap plastic, the pulley housing is also cheap plastic, with a light duty aluminum pin. The pole is not all 2", it is actually smaller diameter for the top 2 sections. The flag provided with the pole is see through and the colors are poor (although I wasn't expecting much for the included flag...).Additionally, the product is also listed as "Heavy duty", but the instructions actually come with a note that it is recommended to disassemble the flag pole in heavy wind. After putting the pole up, it appears that 30 mph wind might be too much for the pole.I would not buy this again or recommend it to anyone.

I bought this for the 'pole' only. I use it for a blade antenna for a signal booster on side of house. Now, all that said, it came with a USA flag. If you are buying this for a "flag pole" I would give it 1 star. The USA flag that came with it is absolute garbage quality. (you can see right through the flag and one side is discolored). It was respectfully disposed of. The grommets to attach the flag are very cheaply made and broke in my hands just messing with it. Now imagine if I actually put a flag in the wind on it? Pretty sure the flag would just 'break off' and float away. The pole itself is 'ok'. It does compact down to under 5'. It locks by twisting it. Again, not too sure that type of locking feature will stay 'locked' in a strong wind with a flag on it. The other flag pole I have (for my flag) has locking pins. Would I buy it again... not for a flag pole, that is for certain. To use it for what I use it for to attach a blade antenna on it? Maybe.

I ordered the wrong kit, which is 100% my fault, but I’m pleased with it. If a bad storm is a brewing I can easily remove the flag and pole!I didn’t come with footing instructions, which wasn’t an issue for me, but could be for other people. I went heavy on the footing 24” diameter x 36” deep with concrete and 6”-8” of small stone under Under to drain water. Pitched the top of footing to shed water. I used 5ea 80lb and 1ea 60lb bags of concrete mixed with 20lbs of quick set on top to prevent the sleeve from moving off plumb.