CZUR Aura Pro Book & Document Scanner, Capture A3 & A4

Given the price point, the Aura is a wonderful addition to your scanning equipment, especially if you scan uncommon dimensioned pages or books/booklets. 1) The packaging was very professional, quite elegant and more than adequate to protect the contents. Amazon double boxes, so that's a plus. 2) The overall UI is very easy to understand and utilize. There are only a few enhancements that I would like to see (mentioned later). The software performs pretty much flawlessly. I had a few user errors initially, which tech support cleared up quickly. It took about 1 day and about 4 hours of use to get the process down to where I could scan a book very fast. 3) The equipment itself takes up so little room on your desktop, and you can leave the black mat permanently on your desk, as it doesn't get in the way and is very durable. I would even suggest that many scanner users simply put aside their old scanners and leave this one out for 99% of your work. Only when you need resolutions above 300 dpi would you pull out the older scanner. 4) The software has many options, and I found that while the defaults were Ok, I preferred to increase the dpi and jpg resolution to better values, so as to ensure a higher quality output. This did not slow down the performance of the unit at all. In fact, the speed of the scanning process is amazingly fast; I would guess about 2-3 seconds when scanning both left and right sides of the facing book. Less than that for a single page. 5) The included sidelights were very useful for glossy surfaces. Without them, the upper LED's cause a slight reflection; the sidelights did not. Very nice the way they mount too, quite impressive engineering. 6) The "autoscan" feature is most impressive. It auto-senses your turning the pages, waits, then proceeds once the motion has stopped. Wow, makes it quite fast to scan 100 pages or more. This is one of my favorite features, and basically eliminates the need for the foot pedal. 7) Suggestions: Mainly I would like to see some very simple UI improvements, such as: a) support for mouse scrolling while hovering over certain UI sections; b) putting more of the software "options" in one place. It can be a bit difficult to find them all, as they are generally buttons on each functional page, and you have to hunt the options down. For example, the default folder for storing the temporary scanned images - not on the main page, but on the scanner page, under a button in the top left. c) I would also like to see the user manual be updated, as well as a place on their webpage for general tech support library of user questions and answers. In many cases, it would be easier to search for a question, rather than emailing the tech support team. This would also free up their time for other things.

I bought the CZUR Aura Pro to digitize old Japanese Buddhist books, and it has exceeded my expectations. The setup took only a few minutes, and the foldable design saves space on my desk. The build feels sturdy but not heavy. Scanning is fast and satisfying. Once I got into a rhythm with the foot pedal, I was scanning an entire 200-page book in under ten minutes. The image quality is excellent, even for small kanji. The curve-flattening feature handles old bindings well, and the software automatically splits the left and right pages into separate files with good accuracy. Lighting is strong and even. The side lights reduce glare on glossy pages, which is important for older books printed on reflective paper. The OCR works with Japanese, and while it’s not perfect on rare characters, it saves a lot of time converting text into searchable PDFs. It also doubles as a desk lamp, which I didn’t expect to use much, but it’s bright, adjustable, and genuinely useful. Overall, the Aura Pro is a solid, thoughtfully designed scanner. It has turned what used to be a slow and stressful task into an efficient, almost meditative process. For anyone who works with books or historical texts, it’s an excellent investment.

I got this to digitize my books for portability and for the OCR to speed research and the ability to digitally quote references in research works. The English texts I scanned the OCR was almost perfect including picture placement on pages, etc. I have a large collection of German texts printed in various Fraktur fonts. Unfortunately, the OCR is not up to par with this but there are ready work around via Gemini for example to get the texts read. The set up and software download and set up were very easy to do. The user interface is pretty good and fairly intuitive. It takes a little getting used to some of the ways it operates but overall a good experience. Scans are quick and I was able to do a 200 page fragile book in less than 20 minutes. I'm sure I could get quicker with practice. The main issue is that the scanner won't always recognize the page borders and will get your hand even using the finger cots. Overall a good addition to my library but because of the issue listed above I would give it 4 out of 5 at this price point.

Very handy for reducing paper clutter. For scanning books, the page flattening works if the book is positioned and held correctly. One should practice a little before trying a big job, but it's easy to get the hang of, and the software allows one to redo pages that don't come out just right. OCR works pretty well PROVIDED one has successfully scanned a page without much distortion, which is why practicing is important. When scanning a new book I would suggest a few trial scans of pages near the front, back, and middle, with the finger cots, to get a feel for the best way of holding it. I consider this a good purchase, and hope to make a lot of use of it.

Great scanner. Good colors; the automatic scan option makes scans fast! You only need to turn the pages, and when your hands clear the field of view, it will trigger the shutter. Previously I bought a cheaper model from the same brand, but had to return it due to poor resolution, graining and poor color representation. This model's resolution is the minimum you will need for a decent scan. Anything lower - just forget about it. This one is a perfect balance between quality and price. Also, sometimes (and quite often) you won't be able to do without the back lighting, it works like a miracle. In addition, this model looks great on the desk and can double as a desk lamp.

I had high hopes of scanning my paperback collection and converting it to EPUB. That really isn’t going to work out. It took a while to get hang of scanning a paperback book. That went alright. The post scanning clean-up took longer. Had to do a lot of cropping. Then the OCR worked well but the formatting into Word wasn't great and it didn’t translate well into EPUB. Bummer. But I’ve got a great PDF copy. It just didn’t work out as I’d hoped for this aspect. Now as a scanner it is awesome. Very good at scanning flat pieces of papers and can do so very rapidly. Way better than the flat-bed scanner I replaced. So that is great.

The CZUR Aura Pro Book Scanner works well for scanning my hard and soft cover books into a PDF format that I can store on my computer, LAN, or online. I literally have a book case in every room of the house except kitchen and bathrooms. Using this device to create a PDF library, I can now search for topics I need to read about electronically. The resolution of the Aura Pro is more than adequate for what I need. It conveniently doubles as a desk lamp, so that I can have up on my desk even when I am not scanning books or documents. I also like that it is easy to travel with.

STRONG POINTS: The box!!! Amazing packaging: sleek, solid, very well engineered, even over-engineered. If I didn't need it to return the item, I would keep the box. Product appearance was also beautiful, very nice, contemporary, practical design - makes for a great desk lamp. And it looks great sitting there, doing nothing. HONORABLE MENTION: Customer support: they were responsive and tried to help, but there was just no helping it. WEAKNESSES: Software never would recognize the scanner. I wasted two days of my life going through the troubleshooting steps, giving it permissions for my antivirus and firewall, installing and reinstalling software, rebooting, trying different USB ports, camera selection, invoking the darkest corners of my vocabulary, you name it. If you have more than two days to play with and a great sense of humor, go for it. Where else are you going to get a great box?

Had a book that was falling apart which was quite pricey and would take almost a month to ship a replacement. Decided to buy this to preserve the book, and many others. its done an excellent job. Its quick once you get the hang of it and with all the image editing options the scan came out looking better than the original book !

1- long conetion time to win 10 - it can take about 5 min. 2-long scaning time in auto mode, much longer than described. 3-Adjustment after scaning - program crashes after few hundrid pages an you need to start over.

El scanner funciona muy bien, rápido y el OCR es muy preciso. Trabaja perfectamente bien, lo mismo con documentos, libros de pasta blanda y libros de pasta dura. Hace la corrección geométrica muy bien y me ha permitido también digitalizar algunos dibujos en formatos mas grandes. Funciona además como una lámpara de escritorio bastante elegante.

Great for scanning thick books without damaging them. Takes a little use to get used to it.

Quality product that was easy to set and begin scanning. It is as fast as advertised and the OCR Software is equally fast and very accurate. Extremely pleased.