Quantum 2626

This is above all a great sounding interface. I recently moved to this platform from an old Focusrite Saffore Pro 40 Firewire. I still have that interface in my studio so I was able to A/B compare it with the Quantum 2626 Thunderbolt 3 interface. The difference in sound quality is immediately apparent. The best and most detailed comparison I could make between the two was by listening to the same audio tracks played on both interfaces through a pair of Sony Z1R headphones. The dynamics and overall clarity of the Q 2626 is far superior to the Pro 40. It's a major upgrade. Perhaps that is to be expected due to the difference in age between the two platforms but I was always happy with the sound of the Pro 40, until I heard the Q 2626. I'd like to point out (as other reviewers have) what is perhaps thr biggest flaw in this unit, the lack of any hardware monitoring for any of the audio inputs. That omission has been fairly criticized but it's not a dead end to your workflow that some other reviewers have implied. If you plug anything into the XLR/TRS inputs on the Q 2626 you WILL NOT hear it through the headphone jacks or the main outputs without doing more setup. This is not what most people are used to with their audio interfaces and I'd never encountered it in over 20 uears of audio production using many different audio interfaces in that time. In order to hear your microphone, guitar, keyboard or whatever you have plugged in to the Q 2626 you need to open your DAW software of choice and route the audio signal through there first. For example you plug your mic or instrument into the front panel of the Q 2626, then open a new project your DAW program of choice. I will use Cakewalk by Bandlab for example as it's a well known and free DAW but the steps will be roughly the same for any DAW like Reaper, Studio One, Pro Tools, etc. Open a new project in your DAW software and select or insert an empty audio track, then press the button on the track that will enable Live Monitoring. In Cakewalk that would be the "input echo" button right next to the Record Arm button on the audio track. Once you do that you should immediately hear the audio from whatever you have plugged into the Q2626. If not then make sure you have the input on your audio track in your DAW set receive audio from the Q 2626 input where your mic or instrument is plugged in (Cakewalk has a drop down menu on the track to select this) and make sure the output on the same audio track is set to the Master Out for your mix, AND that your Master bus is set to output to the Q 2626. It's easy for any experienced audio engineer or hobbyist, and while it may be work for a beginner, once you get a track template set up and saved you just need to reload it each time you need to monitor or record and you're all set. That being said I do not prefer this implementation and would have liked Presonus to include a hardware mixer built in. I can only hope it was a worthwhile trade off from a design and engineering perspective and not some plan to get users hooked on subscription based audio production software from Presonus or to buy one of their outboard hardware mixers.. Even cheap $50 audio interfaces have hardware monitoring and have forever, but maybe a quality hardware monitoring implementation would have been too expensive? I'm stretching to give Presonus the benefit of the doubt here. There is an idea that because this is a Thunderbolt 3 interface that latency is a non factor, but there is always monitoring latency, and it will become worse if you are recording in a project with 100-200+ audio tracks and running dozens of plug in effects forcing you to increase the buffer size and adding more latency to live monitoring. Most people don't have such needs though, and others who do cam get around it by upgrading their computer hardware to be more powerful if necessary. That being said what matters in the end to me is the quality of the audio this thing can produce. I don't think you can do better for the money. It's much better than I was expecting as having heard other Presonus interfaces in the past I was not impressed, but this unit is different and exceeded my expectations for audio quality by quite a lot. The preamps are full bodied and quiet even when turned all the way up. They also deliver great dynamics (to my ears) and the DI for guitar & bass excels in my opinion. It passes a very full, dynamic and clean DI signal that amp sims should love. It sounds great with Neural DSP Architype plug ins for example, partly because of the quality of the input from the Q 2626 preamp (use a good quality guitar cable too). Vocally the preamps also sound great to me, although there is likely better out there if you want to spend a lot more. These will be more than enough for most people if they have a decent mic to plug in. Another point I want to make is about the power plug on the back of the Q 2626. Yes it's a small plug similar to one you'd see on an external hard drive or laptop computer, but what's not readily apparent is that it's a twist-to-lock plug. You have to insert it and give it a press-twist to lock it in place. Once that's done the plug will not wobble and will stay in place much more securely. The power button on the back of the unit was a design mistake. It's rack mount so most people can forget about being able to use it once the interface is racked. You'd have to leave it on 24/7 or rig it through a power strip or similar that has it's own on/off switch. If it's sitting on your desktop it's less of a problem, or you can rack it on the bottom and leave an open space to get your hand behind it. The unit is not very deep, only about 6 inches so it's not too bad if you have to do this. Build quality is solid. The unit jas a good weight to it and the volume knobs have a nice resistance to them, they don't feel like cheap loose spinners. As for Thunderbolt 3 just make sure you are set up correctly if it's not a native feature of your computer. In my case I run Windows 10 x64 on an AMD CPU platform that I built. My motherboard (Gigabyte) has a Thunderbolt header on it and I'm using Gigabyte's Titan Ridge 2.0 Thunderbolt 3 PCI card. In my case I had to make sure I was using the correct PCI slot (the PCI x4 slot, usually located as the bottom slot on newer motherboards) and had to make sure the thunderbolt header on the motherboard was plugged into the Titan Ridge card and that both power cables were plugged into the back of the Titan Ridge card. You may also need a BIOS update to unlock thunderbolt fucntionality depending on the age of your BIOS. If you are an Intel or Mac user and your system came with native thunderbolt support you won't have to worry about any of this, which is great. Assuming you have your thunderbolt connection properly set up you should get very good speed from this interface. If you are a windows user there are things you can do to further improve performance and reduce latency like turning off HPET, disabling C-States, setting power modes to max performance, and more you can look up elsewhere. I should mention that you WILL hear audio from your PC right out of the box when you plug the Q2626 in, so unlike jumping through hoops with live hardware monitoring, you can plug in to your conputer and hear audio from websites or games or MP3/FLAC players, or anything else. Quality is great too. Overall I feel this is a good unit for the money that should last many years. If you can deal with a few quirks then I think you'll find it worth your while as the quality of the audio makes up for any other shortcomings.

Amazing interface. Preamps are and converters are so CLEAN!!!! Headphone amp has plenty gain. Presonus really did it with the new quantum interfaces. They easily expandable thru adat optical ports. The software is great and fairly self explanitory. The perpetual license for Studio One is a huge plus. Just wish they did a better job of explaining loopback setup in documentation. The documentation and explaination of features is the only comolaint I have, but if you just go thru the settings yourself thru trial and error, you can sort it all out. Took about 20 min to figure it out on my own. If they just fix the documentation for Universal Control, it would be perfect.

Best standalone mic adc/amp I have used; coming with a copy of Studio One 7 was also a nice touch. Huge plus: there is minimal bloatware. You will probably want to install the official drivers so that you don't have dozens of input devices, but it isn't absolutely necessary and the software to control this is both unobtrusive and minimal. For the amp itself, the automatic gain isn't as great as others have made it out to be from my personal use, but the total gain available and audio quality is better than any other mic adc/amp I have used. It doesn't have as many available effects OOTB, like an analog compressor, but that can be done inline or via effects. I am not really much of a musician (hobbyist at best), so I can't speak too much for Studio One 7, but it works with my generic midi keyboard and has a sufficient number of instruments available. My plan was to get a low noise, higher gain mic amp that had minimal intrusive software bloat and this delivers.

This is a great improvement over the previous USB 96 interface that I was using. Way more controls, very intuitive, and low latency. If I had to find a negative, I would say that the midi interface is not what I expected. Rather than the standard 5 pin connector that you would normally see, this has what appears to be a mini plug. Other than that, it's a great interface.

Nothing in the box and no mention of it. The device itself is cool but haven't used it enough yet. Update: I worked through the normal type of setup issues and the device works as advertised. HOWEVER: Once I received and registered the interface the subscription for the 6 months of Studio One + did not appear as described in the set up instructions. I opened a ticket with their support team and was made to jump through hoops and provide my receipt and a picture of the back of the unit even AFTER it had already been registered to my account. They were rude then just stopped responding. I went back to customer service at Amazon and was treated respectfully and provided with a resolution I could agree with NO THANKS to Presonus. I have been a user of Studio One for many years and now I really am sorry I went down this road. I have bought software and hardware products from them for years not to mention the time and effort learning their platform. Forewarned is forearmed.

Me gusta mucho y funciona perfecta. El acabado en metal oscuro queda mejor que en las fotos. Electrónicamente es una maravilla.

Avevo presonic studio One e volevo provarlo con la scheda usb srmpre della presonic. Infatti è un' ottima accoppiata, perfettamente compatibile.

La interfaz en si esta genial, no le doy 5 estrellas porque hubo un tema donde me dieron una que no era, pero la regrese y se hizo el cambio y me dieron la correcta

Preamp select button has 1-2-2-4 it should be 1-2-3-4

Alles Top 👍