TP-Link Deco WiFi 6 Mesh System(Deco X20) - Covers up to 5800 Sq.Ft, Replaces Wireless Routers and Extenders(3-Pack, 6 Ethernet Ports in Total, Supports Wired Ethernet Backhaul)

So far I’ve been using them for 2 years. Pros: they are very easy to set up, great quality, they do not drop connection, very stable internet as long as you set them up right, the app allows you to label them, they work fine for connection up to 1Gb. Make sure you connect your main to your modern near an open space centralized and with an Ethernet cable cat 5 or higher. Each has a duel Internet port in case you want to hardwire into a device instead of wife. Cons: the app sometimes prevents them from working properly so sometimes you simply have to open up the app so it can reboot itself, after a reboot sometimes they don’t automatically start working (so you must unplug the power of those showing red, will quickly reboot and show green), my biggest issue, the app displays usually the wrong speed, sometimes showing mbps or kbps, speed fluctuates a lot, even when you perform a 3rd party speed test, not exactly sure why. Location is a must, you must make sure they are set as close to each other as possible while getting a strong signal ( must play round to find the sweet spot). Over all they are great if you set them up properly, they provide great internet, very easy to use and set up, requires no maintenance but updates, so far I’ve had no issues for the last 2 years. I would recommend the Decos.

I'm an IT geek / software developer for a living. I know all about how this stuff works and I wanted fast, but I didn't need crazy expensive for my home and some of these mesh systems are way overpriced IMHO. Reality is you can have all the latest crazy standards but once you get 20ft from the access point all bets are off and you'll never see the speeds you see quoted so you need to mix practical with price. There seem to be sooo many mesh system options these days, that I was overwhelmed, but after some consideration I thought I would just go for this one which seemed reasonably priced, but still offered most of the latest standards (and thus speed limits) and also had free returns! In this case this config with 2 slave units was great for my ~4500 sq ft house, my previous single access point left some dead spots (like my Ring outside the house) just outside the range. But with this setup I can blanket the house and get pretty good speeds (>100-200Mb throughput) just about everywhere, and faster (400+ when you are reasonably close / line of sight to the access point) It's important to remember when thinking about laying these out in your house what and where you need the speed. If you need speed inside your house (say you are always streaming movies from a pc to another device) or if you need speed from a device to the internet. The slave access points can only provide as much throughput back to the main access point (which is probably directly plugged into your router/internet) as good as their own wireless connection is to EACH OTHER. eg: if you put the slave access points 50ft away they might "only" be able to get like 20Mb back to the internet, as your devices is going from device -> slave access point ->* main access point (next to your router/internet) and the * connection is the weak link. What was the killer feature for me on these is you can actually use ethernet as a backbone for the slave access points. My house is pre-wired with ethernet so I was able to put the slave access points pretty far but every slave is hardwired back to the main access point and thus has 100% of the throughput back to the internet so no matter which access point you connect to in the house each access point is as fast as the main one so the access point to access point speed drop is a non-issue if you can set it up like this. DO THIS IF AT ALL POSSIBLE! It's like having 3 "full speed" access points strategically dropped through your house. It wasn't obvious I could do this from the (very basic) docs for setup that came with it, but a quick search through the online docs showed you could this and it's brain dead, just plug your home network into the port on the back. Extra bonus feature, you can use the 2nd port on the back as a local hardwired port so if you have a single PC or "device" (like an xbox or something) next to the access point you can still plug it in directly and get full hard-wired speed without needing to buy an extra switch in the middle. Note: If you don't use the 1st port for the backbone, then you get 2 ports for local devices that will get at least Access Point -> Access Point speeds without one more wifi hop needed. I was pretty impressed with the iPhone app that you use to manage the setup, gone are the days of a webbrowser hitting a super slow admin page, the app is snappy and you can tweak all kinds of stuff. (favorite feature: One of the access points ended up in a kids room and they complained about the LED at night, guess what, turns out there's a "night mode" where it turns off the LED's during a timewindow in the settings pages!) The "mesh" part works really good too, from the app you can see your device move from access point to access point and what devices are on which and stuff. Super handy for initial setup troubleshooting and geeking out over how it's all working. I will admit, I was a little nervous since TP-Link is sort of a more bargain brand in my head, but I've had it going for about 8 weeks now in my house and it's been basically flawless. I'm sold, I'd TOTALLY buy this again or recommend it to a friend (or anyone reading this)!

This Tp-Link X20 mesh Wi-Fi device is a must-have if you suffer from dead spots or a lot of buffering Wi-Fi. It literally increased my signal strength and boosted up my mpbs almost threefold and that is no joke. The price here on Amazon is amazing and let's put it this way this device on the box claims it will do a 5-6 bedroom house and it definitely will. I only have a three-bedroom house and this device can definitely work for a house almost twice my size. I have included pictures The first one that shows an HDTV is from the TP link app running speed on average which is definitely good enough for streaming 4K movies and the other is from my cell so you make the call but you would definitely not be disappointed with this. Long story short, my Wi-Fi router was only reaching about 300 ft and I believe that these devices can reach anywhere from 900 to a thousand feet per node and each one of these can work in series so you can expand your Wi-Fi coverage even further. Example some systems can expand your coverage but have to be connected directly to the router either utilizing it ethernet cable or Wi-Fi connected so it can expand your coverage but not this device you use one of the nodes for the new Wi-Fi router and it doesn't matter which one you use, use the included ethernet cable unplug your modem plug in your ethernet cable to either port on the back of the TP-Link node and the other on the back of the LAN port from your modem and then plug your TP link node into the wall receptacle along with your modem/modum router combo and then power them both up at the same time. Once done you have to download the app and there is a QR code and a website that you go to for either iOS or Play store and the app has instructions to follow step by step and once you're up and running you're good to go with that one and your new node connected acts as your new Wi-Fi router with faster and better coverage. All the other existing nodes that you have all you have to do is put it in a location where your signal is weak hopefully somewhere between the Wi-Fi router and that dead zone so you still have a little bit of Wi-Fi and it will shock you because the new TP-Link node actually reaches out a lot further than your Wi-Fi router so depending on what Wi-Fi device you're connected and how close you are you may actually have Wi-Fi coverage covering the area that used to be dead. But hooking up another node would definitely expand it at least through your whole house literally. I can't say enough about these I had one time or a show I think buffered for about 2 seconds and that was it did not buffer again and I believe that was at the very beginning before the show loaded on my TV but most of the time it is really responsive and does not cut out or buffer and reaches so far that it is unreal. The speed that you get with this remember it's also limited onto how much speed you're actually paying for through your internet provider so keep that in mind. It shipped really quickly and I definitely got it on time and Amazon has literally saved me from having to spend hundreds of dollars on a new mesh Wi-Fi router to do my whole home with this new mesh Wi-Fi router combo it makes it so simple to hook up and honestly I have never hooked up a Wi-Fi router and set it up in my life. The internet provider when they installed it they hooked it up and set it up and I've never had to mess with it until now. Something to think about but definitely definitely I cannot say that enough this is worth a try as you would not be disappointed. And as for people who do gaming I don't but my stepson does and when he comes over and brings his PS5 there is no lag the picture is so crystal clear he was actually shocked that this works a lot better than my original Wi-Fi router so something to think about and he's a young adult.

I have not had any issues with this mesh since initial set up. The set up is easy to follow and straight forward. I did have a minor issue, but that was on my end and my service provider was able to give me the correct information needed to set up. It has been running now for about 4 months and we have had steady connection across all devices - computers, TVs, gaming systems, smart home and surveillance systems. The back room that was often a dead zone now gets a good strong signal. I like that I am able to hard wire certain devices into each unit if I want to. We currently have the main home computer connected to the second unit, and the Xbox and smart TV on the third unit. Not that any of these devices were experiencing any lag or connection issues on wifi. It also has the option to set specific devices to priority on wifi or to set a device to only connect to one unit rather than the mesh to maintain a steady connection on items that are stationary. The parental controls are also a great feature. You do need to pay to unlock everything, but the free features are enough for my needs. It allows to filter content, block websites, and set up screen limits. The only inconvenience on the free side is that you cant set multiple time limits for differentdays of the week. While I can set a bed time daily, if I want to give extra time on the weekend I do need to manually reset it every week. However, it is not a big deal with the app. Wifi to all devices you set to your child's profile will be turned off at the time you set, and not turn back on until a time you set. Bedtime routines have gotten smoother as they quickly learned there is no "just a minute". They now take note of the time and hurry to finish, save their progress and say goodbye to friends before the time runs out.

Im using it in addition to a huwawei modem that has internet connection from a 4G sim card. I connected router to this device with the included wire and spread the 3 connection points between two floors. Now I have very strong coverage in every room!

Purchased 2 for a total of 4 units. It's overkill but wanted to make sure I have great coverage inside and outside, plus its was on sale. My house is set up with ethernet cables on every floor and in every room on the main floor. This makes it alot easier to set up and very strong signals with no drops or lost. Moving from room to room and different floors too, makes it seamless. You don't notice it at all. At the beginning I did have 1 main, 1 ethernet , and 2 wifi connectioned all in mesh. The wifi signals are good, but speed tests results are not as fast compared to having them all mesh via ethernet cables. But if you aren't able to mesh them via ethernet cables, and your only choice is through wifi, you won't be disappointed. You'll still get great coverage and good speeds. The set up using the app is very easy and fast. You can make all changes to all the settings at your fingertips. You can also see what device is connected and to which deco. Almost forgot, if you have a switch, prefer TP Link switch, use it after your ISP modem, and main Deco. There is diagrams on TP Link website to help you out. This setup eliminates all my multi wifi routers and the manually connecting to them as you move from one room to another, as you lose wifi signals.

منتج جيد للاستخدام وسهل في التثبيت وشبكة مستقر خلال البيت

I'm very happy with this purchase. Speedy delivery and thoughtful placement of the package when I wasn't home. Set up was easy as well. My wifi performance is now much better than previously.