Aideepen STC-1000 Temperature Controller, AC 110V-220V 10A Digital Thermostat with Temperature Sensor Probe NTC 10K, Heat/Cool for Fermentation Hatch Freezer Aquarium

Excellent product easy to mount and the setup process is easy and clear to understand highly recommended unit. Very accurate and controls the temp quickly build quality is very good.

Brilliant temperature controller. Still fine and has been working great for 5 months on my hot water

Brilliant thing ,we have a old rex (who?) Freezer and the thermostat had died ,now an obselete thing from all suppliers even the name is obselete unless your italian! We first bought a "universal" thermostat (its got 3 pins) which either refused to switch on or turned everything into the north pole refusing to switch off so iused a timer to switch iit on and off having shorted the supply and black wire. Bought this brilliant! Solved the problem BUT Why isnt the imput wires for heating or cooling built into the item ? After all it cannot be used without them so makes sense to have a permenant connector to them freeing up space in the joining clamp. And why such a short sensor lead? You can lenghten it but even 2m isnt going to break the bank! Difficult to mount other than in a cut out but not impossible . Good item and half the price of a rubbish "universal" thermostat that wasnt! 20 year old freezer now happy which makes me happy!

Easy to install instructions could be better but instructions and be adjusted plus or minus to match any another

Only just tried to use this and found it doesn't work

works well but unintuitive to operate. You have to use instructions to set it.

It's great value for money and does exactly what it says on the tin. I do recommend checking out a quick wiring and setup guide on youtube before installation. (I'm no electrician.) What wasn't quite clear to me at first is that the mains don't power the connected heater/cooler via the device, that's just to power the device itself (left 2 connectors). Then you connect the thermostat (next 2 connections) which seems to be pretty accurate. And for the heater and/or cooler appliance, you cut the neutral cable (black/blue) of the appliance's power cord, strip both ends and connect them to the terminals of the device (heater/cooler). Once set up, it works like a charm and costs much less than other devices I've checked. Recommended!

This is a simple temperature controller. It does need wiring up with mains electricity by a competent person and needs housing in a sealed container. I used a waterproof ABS Plastic Electronics Project Box. (Ebay). It can control suitable heating and cooling devices. I use it to regulate the overnight temperature of two greenhousr propagators with heating only, not cooling. The supplied stainless steel sensor sits inside a propagator in compost and maintains the set temperature within +/- one degree centigrade. Obviously there is a lag time between heater and compost. It could be used to power a cooling fan at the same time if required. I use two of these across the sowing season.

Used for a freezer with broken thermistor. Works just fine.

Après une surtension, la carte électronique de mon frigo a grillé. Coût de la carte 275€ :( Ce régulateur fait parfaitement l’affaire pour le circuit de commande du compresseur Une différence de 2 degré par rapport à un thermomètre mais le menu F4 permet l’étalonnage à +- 10 degrés par pas de 0,1 degrés La sonde existante du frigo n’a pas été compatible avec le régulateur mais le câblage existant a été récupéré et la sonde fourni a été branché dessus L’assemblage semble être de bonne facture , à voir dans le temps. Pour l’instant c’est un bon rapport qualité/prix J’en commanderai d’autre pour un système de chauffage de serre (prévoir relais de puissance et ne pas brancher de système de chauffage en direct sur le régulateur ( 10 ampère max)) Il y’a 2 sortie un relais pour un système froid et un relais pour système chaud

A bit of an initial struggle to program it properly but as soon as that is done it works like a dream.

Fácil de programar y realiza su función correctamente. Lo utilicé para arrancar unas bombas al detectar la temperatura de consigna

Ottimo! Lo uso per il controllo della temperatura nei miei acquari. Facile da impostare, attiva e disattiva una ventola da PC per il raffreddamento delle vasche nel periodo estivo, mentre lo uso per il controllo costante della temperatura nel periodo invernale. In pratica accende e spegne un qualunque dispositivo di controllo che sia una ventola o un riscaldatore, quando la temperatura si discosta di mezzo grado rispetto alla temperatura impostata. E' molto preciso, inoltre nel menu c'è la funzione di offset che serve a correggere eventuali errori di lettura dovuti alla sonda. Il display è molto luminoso e dispone di un led che indica l'accensione o lo spegnimento del dispositivo che viene pilotato.