Phanteks (PH-ES620PTG-DBK01) Enthoo Pro 2 Full Tower – High-Performance Fabric mesh, Tempered Glass, Dual System/PSU Support, Massive Storage, Digital-RGB Lighting, Black

Whether you're looking to build a dual system setup or power hungry dual PSU system this case has the space to fit everything. Space for up to 5 radiators. As is, depending on your layout there is room enough for a 360mm in the top, 480mm in the side, 480 or 420 in the front, 360 in the bottom (240 if you do dual system or PSU), and 120/140 in the rear with fans in push or pull configuration. If you're willing to mod the case and mount the radiators on the outside you can fit a 420 up top and do all your fans in push-pull. Layout for cable management is really nice. Excellent use of space and placement of attachment points. Building a 3-loop system- Loop 1 CPU- 2xD5 in serial running to 480 in the side and 240 in the bottom. Loop 2 GPUs- 2x D5 running in parallel to multiple cards, then combined to serial with a 3rd D5 and through 2x420. Loop 3 RAM/M2s- 2xD5 running in serial split to parallel the RAM and M2 drives through a 140 in the rear. Fans in push-pull configuration. Overall quality is good, but the thumbscrews were torqued down really hard and hard to seat properly when reinstalling. These could be better, but they could be a lot worse. Great case for any large build out of the box, and a case modder's dream.

Excellent build quality, plenty of options, and so much room for fans. Ended up with three 140mm on top (exhaust), three 140mm up front (intake), four 120mm on the right panel (intake), a single 140mm in the base (intake), and another single 140mm in the rear exhaust. This thing stays good and moves a ton of air. Because of the airflow the fans stay at relatively low RPM and never get too loud.

Bought this to replace my old Phantex Enthoos Pro that I had been using to house my Unraid server. Having the option to add so many more drives was a huge help as my server array continues to grow. I currently have enough space to fit around 14-15 HDDs once I bought some extra drive trays. I have 10 hooked into the front of the case and 4 or 5 more attached to the back bottom. Now I just need to upgrade my PSU so I have enough SATA cables to power them all (Lost my prior cables and don't want to fry something trying to guess which went to which PSU once found). Cooling hasn't been a problem either once I bought more fans to fill out the case. My HDDs average around 26-32C while in use and haven't had any issues with my server overheating. Great case and highly recommend it if it fits your needs/price point.

TLDR: Large Case with excellent features, plenty of space, and well-thought-out airflow options. Slightly disappointed by the lack of included fans but not a deal-breaker for me. I also wish they had included more hard drive trays as I had to buy extras when building, not realizing it only came with 4. General Use: - I bought this to replace a Corsair C70 that was about 9 years old and the rubber was starting to disintegrate, leaving hard drives stacked in the cages. All that I was looking for was good airflow, a quiet case, and lots of hard drive bays. This Phanteks hosts a home server running unraid and runs 24/7. Pros: - I really appreciated the size and thoughtfulness of the case. There is space for tons of cables, tons of devices, tons of hard drives, and SSD's. - Removable dust screens that are easy to access. - Foam padding around the removable sides of the case to really seal it up and make sure the air and dust come through the filters and fans. - Lots of space, enough for 2 PSU's, a vertical GPU mount option, plenty of fan, radiator, pump, or HDD configurations to meet your needs. - The seperated PSU and corresponding storage pocket cover ended up being really nice. It was something I didn't care about but once I had it, it was great to hide the fan controller in there with some extra cables for future HDD's. - Hidden around the back SSD's was a cool way to add more storage and a cleaner look. There is space for more HDD's or SSD's on the floor of the case as well. - Included cable management holes, straps, and channels were great! Cons: - No included fans - Not a ton of included hard drive trays. I believe there were 4 included and I bought the other 4. - The hard drive trays latch together and I really wish there was a way to stack the harddrive trays solid from top to bottom without the gaps between the pairs. I fooled around with it a little bit but feel like this would be accomplishable with some modding. However, it feels like they could've had it work from the factory without modification for very little effort. - The Expansion slots for PCI devices feels slightly off. My GPU is seated solidly but my network card fits loose. Not sure if it is the card, Mobo, or Case but it feels like it should slot more firm against the case on the rear. Overall, I really enjoy this case and it has been a huge improvement in temperatures, less noise, and more hard drive space for my home server. Additional Hard drive tray part number: PH-HDDKT_03 8x Noctua NF-P14s redux-1200 PWM, Quiet Fan, 4-Pin, 1200 RPM (140mm, Grey) for the case fans DEEP COOL FH-10 Integrated Fan Hub, Powering up to 10 Fans (3-pin Non-PWM or 4-pin PWM), Occupying only One 4-pin Motherboard Header Happy to answer any questions

I got the case yesterday, it was delivered very early and I thought it had been stolen, turns out my USPS driver delivered it mind numbingly far away to some other address... Anyways, I had my PSU and HDs already, so I went ahead and pulled everything out of the box and mounted what I had in there just for kicks and giggles. I haven't gotten the rest of my parts yet, but I expect everything to fit seamlessly with no issues. The one complaint I have so far, and I believe it will be the only complaint I have, which is really nit picky would be that in the images on Amazon, there is a fan controller shown with the back panel off, and that was not included in the product I got which means I'll have to buy one to use. Again, it's not a deal breaker or anything, but it would be nice if it was mentioned that wasn't included so I could have had one ordered before hand. If I could give it 4.5 starts I would, but it appears as though Amazon only allows stars in increments of 1... All in all, great case, can't wait to build a dual PC build in it, and it is MASSIVE...

Excelente espaço interno

ottimo case, grande full tower, spazioso, fatto molto bene, è molto versatile, consigliato, unica piccola pecca la mancanza degli slot per drive ottici in dotazione, per il resto è perfetto. Consigliato, spedizione puntuale. Ho montato un radiatore da 420mm ed e rimasto molto spazio.

Veramente enorme, unica pecca è che per riempirlo di hdd è necessario comperare i "carrelli" porta hdd a parte. Attenzione anche alla versione senza finestra laterale! Per il resto case molto robusto, spazioso che lascia spazio libero alle menti creative! Dispone poi di un sacco di filtri antipolvere sia magnetici che ad incastro, un vero top di gamma! Super consigliato!

Boitier magnifique, volumineux et spacieux. Montage de ma E-ATX (330x305mm) qui fait petite à l'intérieur mais c'est ce que j'ai ! Je vais pouvoir faire ma configuration 3 way SLI, Dual GPU full waterbloc sans aucun problème 😁

Especially when you want to use two GPUs. Comes with everything you need.