Window Regulator Clip BMW Series 3 2006-2011 Back Right (Passenger) Repair Clip Part#b0038

Le quedó muy bien a mi carro es para Carros BMW

Nice quality, easy to install, great value, could not tell a difference from original except I did have to relearn the "up" window location due to it reversing upon reaching full up - possibly locates the glass a bit higher than OEM?

I used this yesterday on the rear passenger window of a 2007 328xi. I originally bought a new bavarian auto brand regulator for the window, but the clip never locked in place properly. A few months later... after man handling it too much, the bav auto clip broke. I swapped clips for this one, and it immediately attached to the window! Couldn't be happier!Bear in mind, you do have to perform the install... I moved the broken clip to about the middle of the regulator arm, and had to remove the window motor as well as the pulley gear box (this last part may not be required if you're careful on disassembly). The clip attaches to the regulator arm at a 90deg angle, followed by pressing it down/parallel to the face of the arm. With the clip in the middle of the regulator arm, I spooled the wires back onto the pulley equally from both ends. The one-touch window switch has a calibration mode to learn the open and closed extents, but the pulley cable must physically be able to reach open and closed, so I crossed my fingers and hoped that the middle position for the clip on the arm equated to equal cabling wrapped around the pulley from both ends. Also added some lithium grease along the track.