3M Fastbond Contact Adhesive 30NF, Neutral, 1 Gallon

Not many times in a person's life where they need a gallon of glue, but I needed several gallons to replace the roof of an RV. First layer is wood to styrene, second layer is wood to wood. This stuff worked beautifully. Poured it into a paint tray, applied with a texture roller, easy peasy. It gets tacky within a few minutes, good adhesion not long after, but takes a while to fully dry/cure. Overall, it's very easy to work with and does a great job. I am also quite happy that it seems to stay usable while sealed for a long time - I've got about a quart left in the jug, and a month later it's still perfect. This stuff isn't cheap, but like most magic 3M chemicals, it does exactly what it says it does and does it well.

I used this to wrap a drum set I was building. It worked flawlessly. You have to allow each piece you're gluing to dry for about 45 minutes before you put them together...BUT, once you touch them to each other, that's it, they're not coming apart. No, this stuff isn't cheap, but it works.

So my dumb self decided to use this on some furniture linoleum (Forbo) and for some reason I wasn't prepared for it to stick so well and immediately. It barely grazed it and that was it. I ruined part of my desk because it was impossible to remove and I stretched/ripped some of the linoleum in a panic trying to get it off. User error. Wish I had a helper at the time. Anyway very easy to apply and low VOC make this a great product. Just be careful when joining the two parts.

I've used this product for 20+ years. It's awesome. It works. The only downside is that it's really expensive. I'll be honest. I was expecting a much larger container than what I ordered from Amazon for the price. Be sure to check volume.

It was good to have longer open time. Since our 1st time installing formica. Wiped off easy before dried. We did 2 coats. It had great adhesion. Highly recommend. We used solvent based contact adhesive we'd bought to practice and we were outside. Smell was rough. So glad I saw this on youtube.

I'm a handyman and I was installing formica countertops in two bathrooms for a client. I bought this because I generally trust the 3M brand. But I will never buy this adhesive again. I've used other contact cement before, so I'm familiar with the process. I cleaned the surface and applied the glue according to the instructions. After waiting 30-45 min I attempted to adhere the panel to the countertop and it barely stuck. Even after I pressed it with a roller it still was not stuck together properly. I removed the pieces and put another coat of glue with the same result. I did it a third time with the same result. I looked up some tips and one was to heat it with a heat gun and then try to press them together. This did not work either. This job is now taking me hours longer than it was supposed to and I ended up having to buy DAP Weldwood Contact Cement and go back another day. So if you don't want to waste your time and money, buy something else.

This worked really, really well! I was able to relaminate my 8 ft countertop and a second smaller countertop with some left over I also made backsplashes for both. One thing that helped a lot was to get a Bestt Liebco 588950700 Tru Pro Frieze Nylon Loop Roller Cover. When I did the longer countertop, I used a longer nap roller and it was hard to get an even coat, so product was wasted and it took a long time to set. But for the second one I use the Besktt Liebco Freize Roller and it gave me a nice even coat, really perfect coverage. So I highly recommend this product. You need to follow the instructions carefully. I let it set 90 minutes or more before bonding, longer with the first one because the coat was uneven, too much in spots. This makes it stronger. You have 4 hours to bond it, so that's good in a way, though it does take longer.

I didn't quite know what to expect. I was making a stressed-skin platform by bonding paper-faced structural foam to luan. I was concerned that the paper face and/or the luan would absorb too much, so I called 3M customer service. My call was instantly answered by a human who knew exactly how to inform me on the aspects of the product. The project was a complete success. The consistency is about like a melted milkshake and it will look like it's not enough, but it will be. Make sure you place things right the first time. Once they touch, they won't come apart. Ever. I did a test panel first and getting it apart required breaking the wood luan. Highly recommend.

Parfait à ce que j'attendais!

Pega muy bien materiales como papel, cartón o madera. Seca casi de inmediato. Cuando seca de convierte como en silicon.