LIVOLO White Wall Touch Light Switch(No Neutral),Single Pole Touch Lamp Switch with LED Indicator,Scratch-resistant Tempered Glass Panel, 2 Gang 1 Way,VL-A802-3WG

I am updating my review, because I did finally get these panels working, so I want to go over a couple things first. 1) Do not attempt to push the 4 plastic tabs on the box on the back. In order to remove the glass, there is a small slit, at the bottom of where the glass meets the metal sides. just pop a thin flathead screwdriver underneath it, and firmly but gently twist your screwdriver. The glass will pop off of the metal, and be just fine. I was definitely worried about breaking it at first, but these things are tough, and can handle it no problem. There's a protective plastic lining around it to keep the glass from getting nicked. 2) Once you've got the wires hooked up, and everything is good to go, snap your glass panel in place, and just leave it. Don't touch it, don't move it, don't mess with it for about 10 minutes. There seems to be a re-calibration time on these things, and it takes a bit for it to realize the glass is on, and recognize human touch through it. I thought mine were broken when they first arrived, and that ended up not being the case. I kept pressing the button repeatedly, and it didn't work. I'd take the glass off, touch the sensor, and the light would function perfectly. After getting frustrated, I wrote a review stating they weren't working. At the time, it was true. However: almost immediately after writing and posting the review, I came back, and it was able to sense me touching the panel with perfect precision. So just be patient. Wait for it to re calibrate, and don't pop the panel off immediately afterwards if it's not working at first. Don't do what I did, and it'll work just fine. I ended up getting all 3 that I ordered working perfectly, and they look great in my rooms. If you have one that's a bit harder to activate, try loosening or tightening the screws that secure it to the gang box. I am actually going to order a few more of these, because they are that cool.

This is fantastic! I love this "switch". Its aesthetic is beautiful in my newly renovated bathroom. I was told I needed 3 different switches by the contractor so I went straight to Amazon and found this amazing 3 gang 1 way "switch". It fits into the existing 1 way housing box. According to the contractor the wiring was a little tricky just because the bathroom was initially not wired correctly plus we added an additional light and a fan (hence the need for the 3 gang). The light is easy to clean, easy to see in the dark, and I would definitely recommend it. It has been in the bathroom about 2 months now and is still working beautifully. I may have to upgrade other "switches" to this one because it's great!

The instructions are confusing and several reviewers have tried to clarify but most aren't any less confusing. So here's another attempt: The switch connects the same as most other dual/triple switches using the black(hot) wires only. It does not require a jumper from the white(neutral) wire. It's not clear why the jumper wire is not needed since most smart or illuminated switches need this to provide power to the switch, but it works without it. In the picture from the instructions it looks like the 'N null line' devices need to be connected to each other but they do not. I'm using the dual (two gang) switch and here's how it's set up: 1. L live line = black power wire 2. N null line #1 = black wire to first device you're using the switch for 3. N null line #2 = black wire to second device 4. The white wires for all above lines are connected together with a wire nut or push connector Note: The face plate needs to be installed before turning the breaker back on. If the switch is already powered when attaching the faceplate the switch may work intermittently or not at all.

This is so cool. Very modern. In my case it controls my ceiling fan and light. My ceiling fan and light is controlled by my phone. The light controls whether the power to my fan is on or off. I love it. It’s easy to install. There are enough inputs to put a ceiling fan and light

I bought this too put in my home recording studio because I thought it would look very sleek with the acoustical foam surrounding it. And to be fair it does. Unfortunately I removed the glass panel from the switch to use it as a template for cutting the foam to size and the switch stopped working properly when I put the glass back on. I'm not sure what went wrong since the glass just snaps into and out of place for easy removal. It was cool while it lasted, I'm giving 4 because I'm not sure if I managed to break it or if it was something defective. It was really nice while it worked, you could just put your hand on the entire panel and it would work and the glowing circle was great for finding the switch in the dark

I installed this easily enough, basically the same as any other light switch. Once it was wired up, before I put the glass cover on, I tapped it to make sure it works, and sure enough it did. Then, I put the glass cover on and it no longer functioned. It did not transfer my touches to the button through the glass. I popped the glass off, took the screws out, put the glass cover back on, then tried again, thinking maybe the screws were not flush and might be holding the glass too far away from the switch, and it still did not work. This was a frustrating waste of time.

esteticamente esta muy bien , recordar que no smart , no es con wifi, pero si es táctil hace lo que dice buen producto

First had issues with install as many have had in reviews. When you use solid copper 14awg cable it will push against the terminals and disable the switch from touch contact. We shimmed the back side of the terminals to avoid this and it works just fine. This is a manufacturing defect in my opinion. If I had to do again with this type switch I may try braided twisted wire and it may not happen. Other than that when working they are really nice switches, I’m using it to control the under cabinet LED strip lights for an island which gives it a lot of pop!

easyto install , very nice to look at, and like most items needing a "touch" to work it really does need a "touch" to turn on/off a soft touch some days, a fast tap some other, a longer sweet caress at times. It will turn on, eventually, but you have to discover its mood and use the proper appropriate touch .

Buena apariencia y fácil instalación

Se ve espectacular, aunque es demasiado sensible y a veces cuesta trabajo que al colocar el vidrio, funcione correctamente.

muy buen producto es compatible con cualquier caja solo quitar y poner, tiene muy buena vista en verdad se ven y funcionan muy bien

こんなスイッチが欲しかった。 この値段なら十分な価値があります。 最初は、感度が悪いと勘違いしました。 電源を入れてから2～３分してから操作すれば、その後は安定して 動作するようになります。 電源復帰して、すぐにカチカチやったのでは動作しません。 しばらくしてからの確認をお勧めします。 日本のメーカーでは、1万円前後しますので、これで充分です。 一つ懸念事項は、耐久性ですね。