BASENOR 2024-2020 Tesla Model Y Mud Flaps Splash Guards Vehicle Sediment Protection No Drilling No Tape Mudflaps Tire Protector Mudflaps All Weather Tesla Exterior Accessories (Set of 4)

Excellent protection, perfect fit, and looks factory. The mud flaps/splash guards arrived in perfect condition very well packaged, I'm extremely happy with my purchase. Install took approximately 5 minutes per mud flap, it was a very easy DIY process with no drilling required, and all the hardware was provided.

These do fit the Model Y. The item description is a bit confusing because it describes both Model 3 and Y; you just have to choose the Model Y color option. I learned the hard way that the Model Y is very susceptible to paint damage from road debris kicked up by the tires, especially on the body and molding in front of the rear wheels where the fenders bugle out. One road trip through the high desert in Oregon snow left my month-old Model Y with significant paint chips in this area. I've just installed the mud flaps and I'm quite happy. In my opinion they provide a convincing factory look that most people won't even notice. I can't speak to how they'll perform or hold up long-term yet, but I do believe especially the front ones will block a lot of debris and reduce the amount of chips I'll get on the rocker panels and rear fenders. I do plan to also add PPF (clear protective film) to the rear fender area to further reduce the chance for additional chipping here. Installation on the front flaps is super easy, no drilling or screwing is required on the Model Y. Pop two factory clips out, put the flap in place and insert two provided clips. The flap also clips to the fender molding with a built-in fastener and in a second place with a metal toothed clip. The rears are more involved and require popping two factory clips, removing a hand-tightened plastic nut inside the fender well and a 10mm bolt under the rear bumper. Position the rear flap and insert two provided clips, screw the plastic nut and 10mm bolt back on, and insert the metal toothed clip to secure to the fender molding. My only complaint is the built-in fastener that clips to the fender molding on the rear flaps does not like to stay clipped on and therefor you get a slight gap at the top of the flap (see photo). Otherwise the mud flaps fit very well and have nearly no gaps with the body. They also don't feel super durable, and I spotted a couple broken pictures in the reviews, but if they last a year or two I'll be happy and buy another set if need be.

The mud-flaps look fine on my 2023 RWD Model 3. They contour to the cars body nicely and the install was mostly okay. The front flaps attach to the car with the supplied pins with no real issues. The instructional video the sender refers you to is good but the screws don’t screw in, you just press them in which causes the back of the pins to expand holding them in place. Maybe you unscrew them if you ever need to remove them? However the clips just don’t work. There is no place on the car for them to clip onto. There is a very small metal lip they could conceivably attach to but it’s just too short to work. So I attached the front flaps with just the two base pins and the plastic lip at the top that does clip onto the short metal part of the car and hope that works okay. The rear flaps went on better and I think they are attached reasonably securely. However, you only use one of the supplied pins and the metal bolt underneath. You can’t attach the second button pin because the flap doesn’t overlap the hole in the car. But that one pin plus the bolt should be fine. I just re-used the bolt that came with the car. This will probably make more sense to those who’ve tried to install these! But they are installed, look good, and are reasonably secure without a lot of effort. Some people have mentioned having to drill or expand the holes to get them to fit but the holes lined up just fine for me. You do need to play with the positioning, but I found the holes lined up perfectly after maneuvering the flap a bit.

I just installed these on my 2026 Tesla Model Y Juniper, and I love the fit and look. They feel very secure. The front splash guards are held by two pins and two metal clips (included), making them very secure. The rear splash guards are held by two pins, one plastic screw inside the wheel well, one metal screw on the bottom rear, and two metal clips. Everything fits into the original holes—no drilling needed. All tools are provided, along with two extra pins. If you’re like me and a bit hesitant to pry out plastic pins, it’s not that hard with the included pry tool. Once you remove the old pins, you use the new ones provided. Before inserting the new pins, you need to remove the pin from its socket. A combination of the included pry tool and a pair of long-nose pliers (not included) makes this easier (otherwise it’s a bit tricky). Push the socket into the existing holes first, then push the pin into place by hand. The metal clips that secure the splash guards to the plastic wheel cover have two sides: a flat side and a curved side. Insert the curved side toward the inside and the flat side toward the outside. The metal clip should be fully inserted so it securely locks the splash guard to the plastic wheel outline—if it slides out easily, it’s not properly secured. Once everything is in place, the fit is beautiful—just like OEM. Even the color matches the molding perfectly. Update: A few days after the installation, I drove off a high sidewalk and broke my front splash guards. I pulled backwards to save my rear ones. On the plus side, the front splash guards came off cleanly of the original holes. I purchased another set and had no issue installing the front splash guards into the original holes. It was totally a user error. I didn't hesitate to buy the second set.

If you’re looking for a well-crafted, durable, and stylish solution to protect your Tesla Model 3 Highland from dirt, debris, and road grime, the Basenor Mud Flaps are a fantastic choice. Excellent Fit & Easy Installation These mud flaps are specifically designed for the Tesla Model 3 Highland, ensuring a perfect, factory-like fit without any modifications. Installation is a breeze—no drilling required—so you can get them set up in minutes with the included hardware. Superior Protection Once installed, these mud flaps do a remarkable job of keeping dirt, rocks, and water spray from damaging your car’s paint. Whether you’re driving in the rain, on gravel roads, or through snowy conditions, they help maintain the pristine condition of your Tesla. Durable & Stylish Design Made from high-quality, weather-resistant materials, these mud flaps are built to last. They feel sturdy and well-made, unlike some flimsier options on the market. Plus, they blend seamlessly with the Model 3’s sleek aesthetic, adding a functional yet subtle upgrade. Great Value for Tesla Owners For the price, these mud flaps offer excellent protection and an OEM-like appearance at a fraction of the cost of dealership accessories. If you want to keep your Model 3 looking spotless and well-maintained, this is an absolute must-have upgrade.

Bought these splash guards for my used 2021 Model Y Long range. Comes with clips and fasteners. Very easy to install and fits perfectly.

Install instructions were detailed and easy to follow. The flaps generally look and feel durable, although a bit ridgid. The problem is that they don't feel secure. The push pins are loose and the clips for the front are useless and just fall out. The rear feel more secure since they use an existing bolt. Front are not particularly stable.

**UPDATE March 2025** Basenor reached out to me and provided a replacement set of the mud flaps free of charge. They were very easy to work with once I was able to get ahold of them. Thank you! **Original Review** Build Quality: Seems sturdy and well manufactured Installation: Not too hard to figure out, but included documentation and available installation videos are lacking and outdated. Durability: Poor, after only 2 snow storms my front passenger side mud flap snapped in half and was dragging along the ground. Company: There is no way to contact them on their website and their social media is locked down to only "verified" accounts. As such, I'm forced to leave this public review. Design: I feel they fit the vehicle slightly too low to the ground. Overall: I'm disappointed that the durability isn't higher for this product. I now have 3/4 of the items attached to my 2025 model 3 and it looks quite stupid. I was hoping the company would provide me with a replacement or offer me the opportunity to purchase a single flap, but they have locked down communication and have not provided a way to contact them on their website.

Perfect fit and alignment for 2023 Australian Model Y RWD No issues installing, only possible issue is no guide marks for rear clips, don't feel as secure as the front ones, might fall off eventually, but the rear flaps feel secure enough as there is a little tab/catch near the top and also the screw cover.

Install took around 20 minutes. Looks good, well made. I have other Basenor products and they are the same good quality

My Model Y was delivered with Tesla mudguards, however they were a bit too long and flimsy. So I ordered these mudguards from Basenor. Much better quality than the Tesla ones. Few instructions, but a YouTube video link is provided showing the ease of installation. All four mudguards were fitted within 15 minutes and fit perfectly. Highly recommended

El producto es lo que el vendedor describe pero piense que debería ser más flexible se rompe muy fácilmente con terreno irregular ya van dos veces que lo compro y creo que necesito una tercera o de plano ya quitárselas

Love BASENOR mud flaps for shiny Tesla Model 3! Big strong, keep mud and water off car, no slip, no slide. Easy put on, no drill, no sticky tape, just snap! Fit perfect, like mammoth hide on cave wall. All weather, rain, snow, dirt—no problem! Car stay clean, look good. Me happy, give five shiny stars! Best mud guards for Tesla, ugh ugh!