VES 24" Exhaust/Intake Aluminum Shutter (Shutter Only)

I NORMALLY DON'T TAKE TIME TO REVIEW A PRODUCT BECAUSE I AM SELDOM IMPRESSED WITH QUALITY NOW DAYS, THIS IS VERY WELL BUILT, WILL WORK PERFECTLY FOR MY GREEN HOUSE, THANK YOU VERY MUCH.

I bought two of these in the 20 inch version. It has been in operation for a couple weeks on my greenhouse -- one of them is coupled with an exhaust fan and the other is on the other end of the greenhouse as an intake. A controller actuates them when the temperature goes above 80F.The shutters are all aluminum with a nice welded alum frame. The shutter mechanism works well and smoothly, and the shutters close and seal well. There is an about 1/8 inch gap between the shutters and the frame when the shutters are closed. If I had been able to rate the shutters separately, I probably would have given them 5 stars.The actuator that closes he shutters when power is applied to appears to be a not to well thought out add-on, but it does work (with some tinkering). There is an arm on the actuator that attaches to the shutter bar with a lightweight metal chain and S hooks. When power is applied to the actuator, the arm rotates and pulls the chain which opens the shutters. When power is removed, a return spring that is connected between the shutter frame and the shutter bar closes the shutter. The actuator is powered on all the time when the shutters are open with the actuator motor stalled out. It draws about 6 watts all the time in this situation, so if my two vents are open an average of (say) 6 hours a day the electricity consumption for the year is about 26 KWH an 40 lbs of CO2 emissions a year -- not huge, but it would be nice if the actuator powered the shutters to the open or closed position and then shut off and locked.When I attached the return spring per the instructions, it would not completely shut the shutters -- I moved it to provide more tension and they now close completely. The attachment of the actuator arm to the chain of the chain to the shutter bar are by S hooks that don't have a very well designed connection point to the shutter bar, and I ended up changing this as well. In all it seems like not a lot of work went into the actuator integration with the shutters, but at this point it does operate reliably.

Used for threw wall exhaust on a paint booth. Has been installed for a few months and functions as it should.

This is an exceptionally well constructed device. It appears as if it will last many years. The bracket design made for easy installation and the motor drive is smooth and quiet. I found the instructions to be clear and concise. Since the unit can be wired for 120 or 240v, the wiring configuration varies depending on your ac source. One suggestion is to record which wires are tied together before you install the unit. (For me, the white and black were tied and the brown and red were tied for 120v use.) The configuration is not listed on the installation sheet; there is a decal on the side of the unit. When I installed the unit, I was unable to read the decal - so I had to remove it to verify the connections. After installation, the unit worked exactly as anticipated - opened the shutter completely when activated and closed when powered off. Highly recommend.

Need this item to be picked up ASAP. And a new replacement sent.

Today was corrective maintenance on the old louver system. Louver worked great, but the motor does not stop automatically. While testing installation, the motor popped out the chain rivet, because it did not stop. Waiting on VES to call me back about a replacement. I have one more to replace, hopefully the motor works.

30” Shutter and motorI was very pleased with the shipping speed and the unit’s quality. I have worked in the greenhouse industry for all my life. And know good quality. I would rebuy it in a heartbeat. My motor arrived with a label showing the 240-volt setup. I found the 120-wiring option here, luckily someone included it in their pictures. I'll be buying more.

Works great and fairly quite.