Anker Power Extend USB C Wall Outlet, Efficient Charging with 1 USB C, 2 USB A, 30W Power Delivery Port, User Friendly Design, Durable and Reliable Quality, Etl Listed

I bought this to go beside my couch and I love it. It makes connecting devices very easy without all the bricks or adapters. I havent had any issues with compatibility, but I do wish it had two USB C ports. Very easy to install if you have the ability to do so. It fit perfectly and replaced an existing duplex receptacle.

We have an outdoor gazebo where my wife primarily works during the summer. Since she has her laptop out there, we installed a few of these in weatherproof electrical boxes. They installed easily, though they are a bit thicker than a normal outlet, but no more than a typical GFCI outlet. Overall, they provide a high wattage for having the USBs built in, which is what stood out for us. While a bit more pricey than other options, the quality and wattage are there, making it a strong value. It has lasted more than two years outside in that weather-proof box, which they are not advertised for outside use, but the fact that it has lasted has impressed me. I would definitely buy it again if I was in need of an outlet with built in USBs.

I've installed a lot of receptacles in my day. For integrated USB, this is my favorite. They look so crowded squeezing two plugs and multiple USB into one item! I think this is the best one because they DONT do that. Replacing the second plug for USB looks soooo clean. This is the GFCI protected secondary receptacle in a bathroom. One side of vanity is GFCI, other side is this Anker device allowing perfect convenience to charge a phone, toothbrush, razor, etc without hassle. Absolutely perfect product. The terminals for install are done well and install easy - sometimes these devices get so big they are hard to squeese into the box. I didn't have too much issue with this one. TL;DR: This is the cleanest look of any USB integrated receptacle. It is Qi and PD up to 30W so it is suitable for any device; it's actually quicker than most.

Update: Nearly a year later I followed up with Anker support to see if they had fixed the stripped screw issue. They sent me out a new unit (for free) and I just got a chance to install it. Good news! The new one did not seem to have any issues stripping. While I was pretty careful, it seemed fine (the original one there was no way to avoid stripping the screws). Note that I left this receptacle installed and in use for nearly a year even though I was worried about the clamping force on the wiring due to the mis-tapped screws. I found this an acceptable risk as we only used it during that time period for USB charging, we never plug anything high amperage into the 120v receptacle (in fact I don't know that we ever plug anything in there on the corner of the kitchen counter). I still think the branded factory receptacle cover is dumb, along with the phillips screw heads, and I am wondering if a regular receptacle cover would even work due to the screw head thickness of the ones that will hold it into the receptacle box? It is probably fine, but I should test it. The yellow painted screw terminal is also dumb for the hot. The standard is copper/brass colored screws for hot, and silver for neutral, green for ground. This "yellow" paint is just dumb. Any self respecting electrician will not love this thing. The screw terminals don't come pre-backed out and just general ruggedness is not great. Getting the ground wire around the ground screw was also akward, just the dimensions of the gap you can shove the wire into in order to wrap it around are odd. Anker is a USB charger company, not an electrical receptacle company (and it shows). I kind of wish they would get together with one of the major receptacle companies and do a joint product that is the best of both worlds. ;-) So I am upgrading my review from one star to four stars because I do like the product (it gets used daily by the family in our Kitchen and works great for cell phone charging), but I am unhappy they did not recall the original ones that were defective, and I also think fit and finish could be better from a practicality standpoint. I like the product (and may buy more for family members this Christmas), but there are absolutely areas it can be improved. P.S. The size is pretty challenging too from a box wire fill standpoint, this is in many ways dictated by the physics, but with newer GaN charging designs perhaps improvements can be made. My box only barely fit it. ======== Original Review ======== I have wanted USB chargers in a standard receptacle form factor forever but sadly the “traditional” receptacle manufacturers have no clue when it comes to the nuances of USB charging and all the competing standards. Leviton for instance has had USB-C charging for a long time, but only 5v at 3 amps which makes USB-C pointless (no PD). So I was very excited when I saw this product as Anker is well regarded in this space. Sadly, they have totally failed on the receptacle side of things. There are a ton of reviews here stating the exact same problem I had. The screw terminals must have been tapped wrong or something as a tiny amount of torque will strip them which makes the connection have insufficient torque and likely to overheat. This is a safety issue. This batch of product needs to stop being sold and needs to be recalled immediately. I am not joking, this is a safety hazard. This product may end up being fine, but they have to solve this manufacturing defect. So I went ahead and finished installing it and tested it (under only USB loads it was fine for my test even with limited torque on the screw - I did not use the AC receptacle and I pigtail wired the daisy chained receptacles so they don’t pass through). The charger seems to work fine so far, but the AC tamper resistant receptacle is chintzy, and the AC receptacle does not seem to engage until you insert the plug a long way in. It just does not sound and feel right like a normal socket. For my use case in the kitchen counter it would be fine though if not for the striped screws. The instructions also seem totally wrong. They say to wrap the wire around the screws, but that is NOT the type of terminals they provided. The unit is also quite large (expected for heat dissipation) and so just be aware. It tuned out my electrical box is a low profile one and so it just barely / did not really fit. Pigtail wiring helped a lot. Oh, and the included Anker branded faceplate is dumb. I will just use a standard faceplate when I do the final install if they fix the issue. Note that the sheen of the receptacle is more flat than shiny. And who uses Phillips screws on a faceplate?!? One of those screws was also stripped! Fails all around (but I am still excited for the product if fixed).

I installed this in the kitchen for my wife. She often runs her tablet and her phone asks needs to charge during the day. This outlet provides fast charging USB ports for her devices. It was easy to install and it fit into the outlet box with no issues. The cover completes the look and makes a high-quality install.

I've been happy with this outlet so far. I replaced a Leviton 4X USB-A outlet with this one. This one supports a bit more power, but more importantly has USB Power Delivery up to 30W. That will charge anything, even a laptop but just a little slower. Also the 3X USB on one side left room for an AC outlet that I did not have before. I didn't really need 4 jacks, but 3 I did, and the USB-PD gives a bit more flexibility. For the price I got it on sale, very happy so far.

Lasted 13 months almost to the day. It was great while it lasted. What else is there to say? Great idea, great packaging but the components are just not sized appropriately for the rated load. If you charge 2 ipads on it every night, expect one year of life! --- The day after I posted my critical review I was refunded! changed my star rating from 3 up to 5. They did not ask me to, I was just impressed. Wow, what a great company. I purchased another one because I could not find a better product. I took it apart and noted that it is pretty well built and the components are huge! I am not sure if there is a better product out there. I think the issue is this thing is slammed into a single outlet electrical box. In the future I would install a multi gang box and even put a fan in it if possible. There is just no place for this thing to breath. So I take it back! It is built well. User error. When installing give some thought to heat dissipation.

I was looking for a charging station in my kitchen that did not require a plug and the cord could be directly plugged into. This is very is to install. It is also easy to remove. I changed it while the line was still hot without any issues, but I was living on the wild side and do not recommend doing that if you do not know what you are doing. I took it with me when I moved to my new house and have moved it to different locations in the new house since. The outlet looks very nice and now gives me the versatility of charging phones and other electronics, including my kids' iPads. It seems to charge the devices pretty well. This is the future of house outlets. I really like it and will probably be installing more around the house.