Industrial Rustic Modern Wood Ladder Pipe Wall Shelf 4 Layer Pipe Design Bookshelf DIY Shelving

We are loving our new pipe shelving, and it is so different from just regular shelving. If you are looking for something rustic and different, this is it! We had no problem assembling it, the diagrams that came with this could of been a lot better, the pics needed to be bigger so you could see what was what and the connectors. There is no written directions, so you need to rely on the pictures. It helped us that we were looking at the finished piece. Now for the installation part, very difficult to mount! You need to get the center piece in a stud because if you use the hardware supplied with this, is definitely WILL NOT work! We even tried butterfly drywall mounting, and the weight of the whole unit just ripped it right out of the wall! So, we found a stud that we could use and went in that direction. We used butterflies on the ends to make a sturdy hold.

This shelf looks great and is very sturdy. I recommend anchoring it into the studs and getting better drywall anchors for the screws that can't be placed into studs. (The dry wall anchors that were provided were so cheap and flimsy.) The directions were mostly pictures and were a little challenging to decipher. However, I have no experience with building and I was able to assemble this shelf in one hour. I did take the recommendation of a previous purchaser and did not tighten down the shelf so when I mounted the shelf we could have some play to level all of the shelf pieces individually. You will need at least two people to mount this shelf. I recommend anchoring the center anchor to the wall first. Leveling the shelf directly below, and then level and anchor the other shelves thereafter.

I agree with other reviewers, assembly instructions are useless. I had to use pictures and videos from actual reviews to assemble the unit. In addition, this type of design is not the best one. It would have been nice to be able to hang main frame and then be able to add the shelves themselves. Current design requires two people to hang this unit on the wall. Yet, even then, due to some pipes being too lose or too tight in the connection, it is very hard to mark exact locations of the screws on the wall perfectly. Designers could add couple of extra connectors that would allow unit to be hung in sections, otherwise the whole assembly is bulky and not that light; definitely a two men job. Other than cumbersome assembly and hanging, this unit is really cool if you like steam-punk/industrial type of decor.

I struggled a little bit to get things all lined up before screwing the pipe flanges to the wall, but that's because I was working alone. A helping hand would have made it easier. It's been over a year now and had many guests stay in the room where this adds a bit of steampunkery vibe. I am pleased with it. It's just as it appears in the product description.

This shelving unit is spectacular. The instructions are worthless. You can put this unit together in several different ways, providing you are good at puzzles. We ended up turning one of the shelves into the corner. The pipes are all different lengths so it will not come together like a standard unit. It is made with multiple tiers, with separate fittings to allow for shorter piping on one side and longer piping on the other. All of the shelves are level, provided you correspond the correct pipes. Mounting is a bit more challenging, my best advise is to put it together, tighten all the connections including the mounting brackets. Have one person hold the entire unit to the wall while the other secures the unit with screws directly into the wall.

The product overall isn’t bad but there are a few things that I’m not 100% satisfied with: 1. All the pipes don’t screw tight when everything is aligned 2. There is Chinese writing on the pressure gauge 3. There’s no way for one person to mount this by themselves 4. The wood shelves had several terribly repaired wood holes in them For the money I think they could have done better but overall with some tweaking it is possible to get it looking right.

It wasn't the easiest thing to put up but looks amazing

I almost did not buy this shelf do to a review that said they were a plumber and themself and their workers could not figure out how to assemble. I run a building maintenance service company and this could not have been any easier. I know what you’re thinking…” he has all the right tools and knowledge to figure out a difficult install…” . Well no. Yes on the knowledge and tools but it was far from difficult. A 5th grader could have installed this in 30 minutes. It took me 15 minutes from the time I unwrapped it to taking this video/pics. The knowledge comes in the form of some free advice. 1. Make sure you do not tighten everything until you are ready to mount. I had to work around the corner trim and did not want to cut trim to make a perfect fit. If you are installing on regular flat surface it’s even easier. 2. Make your first mount square and use your level as you move along. 3. It’s piping so make all you adjustments off the level not by screwing and unscrewing the pipe. 4. Enjoy your nice little shelf. I was going to make a pipe shelf until I saw this and thought to myself why reinvent the wheel. Though the price is a bit high for such a little bit of material, I could make this myself for around $20. Not everyone owns a pipe threader. Plus as it turns out their material is quite a good quality material for what it is. Yes it’s real pipe. So I saved myself a half days labor by buying this one vs making one. Would I recommend this to others? Yes, yes I would. If you’re not handy with these type of things just slow down, building it on the floor first than install. You’ll work out all the bugs that way and save yourself time and headache.

sehr schönes Regal. sieht sehr trandy aus und macht sich unglaublich gut in meinem Studio. Es ist zwar keine präzisionsfertigung - aber als Deko top!

Difficult to assemble only due to the fact that you can display this shelf many different ways.

L’étagère murale en bois style rustique apporte une touche chaleureuse et authentique à n’importe quel intérieur. Son design naturel met en valeur le bois et s’intègre parfaitement dans une décoration cosy, bohème ou industrielle. Elle est à la fois esthétique et fonctionnelle, offrant un espace de rangement pratique pour exposer des livres, plantes ou objets décoratifs. Sa fixation murale permet de libérer de l’espace au sol tout en ajoutant du charme aux murs. La structure est généralement solide et stable, ce qui inspire confiance pour un usage quotidien. Un excellent choix pour allier décoration et organisation avec simplicité et élégance

Teuer aber wirklich schön Kommt aus china 😄 Hab teilweise ein wenig Rohrkleber verwendet. Hab ein anderes gekauft wo die beschreibung deutlich besser war. Aber man kann ja eigentlich nicht viel falsch machen.

Real sturdy, a little tricky to assemble but looks great.