Universally Adaptable DC12V LED 6 Switch Panel Electronic Relay System with Circuit Control Box - Wiring Harness Kit for Any Vehicle - Power up to 6 Aftermarket Lights and Accessories - 600W

I had been considering an Spod for my JKU for quite some time and this one was so reasonably priced that I pulled the trigger. I had a couple of small issues during the install, but the customer service folks at SUITECH were incredibly responsive and wanting to ensure that I was 100% satisfied with my purchase. It really makes adding accessories like lights much easier. It was simple to install and had adequate instructions. You should know that the A-pillar mount will come with all four switch cut outs removed. Which is nice if you want to use all four. I had planned to use three with aftermarket switches that I purchased separately. So I had to plug in one of their provided switches as a filler until I decide to add another accessory to that switch. Overall, its well packaged, simple to install, worked on the first try and such a simpler solution to wiring accessories. JKU tip: tap into the orange/white dimmer wire leading to the driver's door to have your switch backlights on/off with the headlights and dimmable!

First, let me say that the documentation is misleading, and I'm sure more than one of the negative reviews about this product not working are because they followed the directions and it did not work. The most misleading portion regards the single wire pigtail that comes out from the large battery wire. The documentation will tell you that if you want to use relays 5 and 6, which are intended for "switched on" functionality, which means they dont have an actual switch, they just come on when the car is powered on... that you should then connect this pigtail to your fusebox. This is highly misleading because nothing will function unless you connect this wire.Also the documentation is amended by some full color photos that are intended to make installation clearer, but mine were so dark I could not actually see the kit in the engine bay photo...But, once you realize that every step is required, installation is a breeze and the kit works exactly as advertised. Solid, well designed, great kit.I would recommend they invest a little more in documentation by an english speaker, as well as provide some guidence regarding the fact that each relay is not the same, the first one supports 30amps, the second 20, etc.... so it matters which circuit you use for which accessory.

I purchased this universal switch box to remedy the rats nest of wiring and random switches in my 4x4 that I need for my lighting and accessories. The basic function of this universal switch box works as well as the best of them (sPod, switchpros, etc) at a fraction of their price. Granted, it doesn't have bluetooth connectivity (mall crawlers love this) or an LCD touch screen switch board.Outside of wiring your accessories and getting through the firewall, installation for this unit was a breeze. It comes with a mounting kit for the fuse box, all the leads are labeled so you know what button lights up which wire, and the wire gauge used were about 14-16GA. I didn't measure it, but there was plenty of wire left between the switch board and fuse box, for easy placement within the front cockpit of any vehicle. The switch buttons click on and off easily. When not in use the LED button background light is green, when in use, it turns yellow. IF you don't use any of the stickers they give you, the LED lights are very bright and can be an issue depending on where you mount them and at night.With all that said. I did have 2 issues with my original switch board. One of the LEDS on the switches was out, and the stickers were slightly bigger than the buttons itself. You might be asking why I still rated them 4 stars if I had issues? Well, I emailed their customer service, whom responded to me same day via email, and was more than happy to help. They sent me a replacement switch board and stickers that fit perfectly, no questions asked within 2 business days. This is how a company should operate and treat it's customers. Because of this, I plan to order another switch box for my other 4x4.

This product is great. Here are he pros and cons:Pros:Great quality. As go as the "SPOD"Everything works correctly.Everything is labeled for easy installGreat instructions with photosQuality copper wiresSwitch quality is goodComes with everything you need.Cons:Mounting location does not work with a hood lift kit. (The hood rasing shock body hits the lid of the relay box)The a pillar fits, and looks to be OEM quality. However there is an odd bend in right below the mounting bolts as shown in another reviewers photo. Also is easily scratches.The relay box is not wired for 5 post SPDT relays. I was able to change up the wiring and do it myself. But just in case anybody was wondering.

It stopped working? Everything still hooked up but no power after relays? How to contact seller? Looked hard to install with all the wires but they took all the hard work out. Very simple. Just connect the battery wire to battery. Switch wire to the switch wire showed in the instructions. ( must notch fuse box to close properly) The pillar switches were already wired so unless you use different switches like I did. you would just install the pillar pod and have to connect the power wire of what you added lights ,compressor ,etc under the hood to the new box. 1-4. And done Ground wire just ground near what you added and only run power wire to the new box.Now if you ordered the other switches from Amazon that have roof light rear lights etc. then those need more wiring. Just jump the ground from #7 to #8 and then find the orange and grey wire behind the window switches and connect to #6 and your done. I just jumped them in loop like the ground to each #6 on all 4 switchesTried to download videos but didn’t work