Thermal Grizzly Kryonaut (1g) – Thermal Paste for CPU, GPU and consoles – Non-Conductive Thermal Compound with High Thermal Conductivity

Great thermal paste with really solid performance — dropped my CPU temps by a few degrees straight away compared to the stock paste. It’s easy to apply, has a nice smooth consistency, and feels high quality. Definitely good if you care about keeping temps low or running a more powerful setup. Only downside is it’s a bit pricey and might not last quite as long as some cheaper pastes under heavy use, but overall it does exactly what you’d expect and works really well.

This Thermal Grizzly Kryonaut paste is truly excellent. I used it to repaste an RTX 3080 GPU, and the results have been fantastic. It successfully helped keep temperatures below 70°C even when the card is running at its full 330W limit, which is a significant improvement. The paste itself was thick and easy to apply, and it appears to be very durable, maintaining its performance over time. Considering the thermal improvements and the quality of the product, it offers great value for anyone looking to optimize their CPU, GPU, or console thermals. Highly recommended for demanding applications. If misapplying it's easy enough to remove with a 90%+ isopropyl alcohol solution.

Literally the perfect amount for a single GPU or CPU. Squirt it on, level it out a bit and slap a cooler on top, dead simple. Temps are always good with this paste, consistency is perfect, works with basically any GPU/CPU and cooler combo.

Used this to replace leaky Liquid Metal in an Asus G513QY laptop. I’m pleased to say it works just as well as the factory Liquid Metal, and the flickering is gone.

I recently upgraded my cooling setup with the ARCTIC Liquid Freezer II 360 and paired it with the Thermal Grizzly Kryonaut thermal paste. The results? Impressive cooling performance that exceeded my expectations. First and foremost, let’s talk about the thermal paste itself. The Kryonaut formula is top-notch, delivering excellent heat transfer properties that effectively keep my CPU cool under heavy loads. Paired with the ARCTIC Liquid Freezer II 360, my temperatures have remained consistently low, even during intense gaming sessions or CPU-intensive tasks. However, there’s one aspect that caught me off guard: the quantity. The 1 gram syringe seemed adequate at first, but when it came time to apply it, I found that it was just barely enough to cover the CPU surface adequately. Thankfully, the included scraper helped ensure an even application, but it’s something to consider, especially for those with larger CPUs or multiple applications. Despite this minor inconvenience, I can’t deny the effectiveness of the Kryonaut thermal paste. It’s a high-quality product that delivers on its promise of superior thermal conductivity, making it an excellent choice for anyone looking to optimize their cooling solution. In conclusion, while the quantity may be a bit tight, the Thermal Grizzly Kryonaut thermal paste delivers exceptional cooling performance that should not be overlooked. If you’re in the market for a reliable thermal paste that can keep your CPU temperatures in check, the Kryonaut is definitely worth considering.

I've been using the Thermal Grizzly Kryonaut Thermal Paste (5.55g) for my CPU and GPU installations, and it has consistently delivered outstanding thermal performance. Designed for extreme cooling applications, Kryonaut boasts a high thermal conductivity, ensuring efficient heat transfer from components to cooling solutions. Performance: The paste's exceptional thermal conductivity makes it ideal for overclocking and high-performance systems. I've observed notable temperature reductions after application, contributing to enhanced system stability and longevity. Application: The 5.55g syringe provides ample paste for multiple applications. Its consistency allows for easy and precise spreading, ensuring a thin, even layer that maximizes thermal efficiency. Stability: Kryonaut remains stable even at high temperatures, maintaining its performance without drying out or requiring reapplication over time. Pros: Superior thermal conductivity Easy application with user-friendly syringe Long-term stability without drying Suitable for both air and liquid cooling systems Cons: Premium price point, but justified by performance Overall, Thermal Grizzly Kryonaut is an excellent choice for enthusiasts and professionals seeking top-tier thermal paste for their high-performance computing needs. Its combination of ease of use and exceptional thermal properties makes it a worthwhile investment for optimal system cooling.

Note: Do a very good research on thermal pastes before starting! Item arrived very fast, less than 24 hours and came in its small black Thermal Grizzly package along with a plastic spatula. The paste seems a bit enlarged in the pictures but it is actually very small. Just 1 gram of that paste, still enough for 4-5 applications. Use only 1 pea size drop on both cpu and gpu, dont put on the heatsink. After you put the heatsink back on the paste will spread equally. There is no downside of putting a little more so if you are in doubt, go for another tiny drop because if you put less than a certain amount, it won't take effect. After you put everything back together, the temperature change is immediate. I am using a laptop, msi ge73 7rf, gtx 1070 and i7 7700HQ. The idle temps were 60 for both cpu and gpu, the full load temps were 95 for cpu and 80 for gpu. The laptop would get extremely hot and it would burn your finger if you touch the top of the keyboard. The heat would reach to the WASD keys causing uncomfortable feeling. There were 25-30% thermal throttling during full load. After applying the Kryonaut paste, the temperatures dropped 10 to 15 degrees. Now, the idle is 50 for both and full load is 83-80 for cpu and 75 for gpu. I tried overclocking the gpu after seeing such temperature drop and that way the temps only increased 3 degress. I used a heater to heat the room and fan cooler to increase airflow. With fans on full speed and room heated, the temps didn't go above 90 for cpu and 82 for gpu even when overclocked. The results are shocking, even with overclocking and warm environment, the temperatures were below stock temperatures. This stuff works and it is much safer and easier to apply than liquid metal. Go for this if you don't want any stress and headache just for extra few degrees less.

As far as thermal pastes go, this is the best I've ever had. Now I am usually one for saving a quid or 2, especially on what I would consider "none essentials" and this would usually fall under that category. However, after 2 unsuccessful applications of a different thermal paste, I decided to go with "performance over price" and I do NOT regret it. My CPU was idling at around 65°c, which is not ideal. Far from. So I decided to change the thermal paste. I used a cheap thermal paste to start with and found that the idling temps significantly decreased down to 36°c. However, it did not last long. The thermal paste crusted very quickly, and lost so much of its potency so fast, it was unbelievable. So I got my hands on this little beasty. Idling temperature is now between 18°c and 23°c, very cool indeed. Very easy to apply too, with the spreader that comes with the pack. Under full loads, my CPU never goes above 63°c, and believe me, I've tried everything to max my CPU, from stress tests, to benchmarks, and I can NOT get the maximum temperature past 63. Amazing thermal paste, easy application, very good performance and premium quality all round. Also comes with very simple and clear instructions for newbies. Thank you, Thermal Grizzly.

VERY GOOD PRODUCT .MY i9-14th GENERATION ON AIR COOLER WORKS GREAT. MAXIMUM TEMP ON 2 CORES TOUCHED 72 Deg C

Tartışmasız piyasanın en iyisi

Die Thermal Grizzly Kryonaut gehört für mich ganz klar zu den besten Wärmeleitpasten auf dem Markt. Ich habe sie für meine CPU verwendet und konnte direkt spürbar niedrigere Temperaturen feststellen – sowohl im Idle als auch unter Last. Die Konsistenz ist sehr angenehm: nicht zu flüssig, nicht zu zäh, lässt sich sauber und gleichmäßig auftragen. Mit der 1-Gramm-Spritze kommt man für mehrere Anwendungen aus, je nachdem wie sparsam man arbeitet. Besonders für anspruchsvolle Systeme, Gaming-PCs oder Overclocking absolut empfehlenswert. Die Wärmeübertragung ist hervorragend und die Paste bleibt auch über längere Zeit stabil. Wer das Maximum aus seiner Kühlung herausholen möchte, macht mit der Kryonaut definitiv nichts falsch. Klare Kaufempfehlung!

✅ Points positifs : - Excellente conductivité thermique, améliore très bien le transfert de chaleur. - Parfaite pour processeurs, cartes graphiques et dissipateurs thermiques dans PC et consoles. - Facile à appliquer et étaler uniformément. - Quantité de 1 g suffisante pour plusieurs applications si utilisée avec parcimonie. - Très populaire auprès des passionnés de hardware pour overclocking ou refroidissement optimisé. ❌ Point négatif : - Prix plus élevé que les pâtes thermiques basiques (mais on sait pourquoi !) 👉 Résumé : Une pâte thermique premium très efficace pour améliorer les performances thermiques des composants, idéale pour les configurations exigeantes, même si le prix est un peu plus élevé que la moyenne.

Detta är den i särklass bästa kylpastan jag använt. Sänkte temperaturen ett par grader mer än motsvarande kylpasta som köpts från Inet. Rekommenderas.