VEVOR Linear Rail Slide SFC20-1000mm 2 PCS 39.4 in/1000mm SFC20 Guide Rails 4 PCS SC20 Slide Blocks 4 PCS Rail Supports Linear Rails and Bearings Kit for Automated Machines CNC DIY Project

Surprisingly good. For the price they work pretty nice not a lot of play in the bearing. I bought these to make a sliding table for a buzz saw so they handle a 150 ish pounds of load and still roll nice without bending. So far they have been installed for 6 month and they haven't rusted yet so the chrome coating is actually fairly good.

I recently bought a stereo microscope head and needed a stand for it. The best stands are double arm boom stands, which use two linear rails. I have a 3D printer, so I figured, why not just build one? Looking at McMaster-Carr, linear rails and pillow blocks are EXPENSIVE. I looked elsewhere online, and they still weren't anywhere near what I wanted to pay. So then, of course, I checked Amazon and found these. I probably could have gotten away with the 16mm rails for my application, but I decided on the 20mm x 1m. First of all, they're super heavy. I guess that should be expected. They have a nice coating of oil on them, which seems to get on everything like anti-seize does - nothing a little brake cleaner can't take care of. The rails are straight and have a nice polish, and they measure 20mm +0.1/-0.2. The ends aren't chamfered, which would have been preferable, but that's an easy fix. The pillow blocks seem well made, with recirculating ball type bearings in them. Putting the two together, the blocks slide nicely on the rails, though they're a bit loud. The dust seals on the blocks seem to be well-fitted and there's no discernible play in the bearings. I need to cut these rails down, and I did so using an angle grinder with a cutoff wheel. I then polished and chamfered the ends with a 120 grit flap disc. Cutting took a couple of minutes per cut. You could probably do it with a hacksaw but it'll take you all afternoon. Out of curiosity, I tried drilling into a piece of the rail and I was able to drill without too much problem, so the rails aren't too terribly hard. Overall, these are a great choice if you need a set of linear rails, pillow blocks, and mounting blocks. I'll be posting my build to Hackaday and thingivese, and I'll be recommending these rails to anyone looking to build their own microscope stand.

Good quality, and good price. The bars are .75" diameter. The packaging leaves something to be desired, order it with Amazon packaging if you can't. My rails worked themselves out of the foam and plastic wrap and were banging around inside the box. Luckily nothing was damaged and all was good. All metal pieces came oiled and rust free. Used this as a router slide to do some wood working without a planar. Plan to us it for a different project after.

I bought 2 sets to make my own slab flattening setup.I am still working on it BUT I am REALLY, REALLY IMPRESSED with the quality, heft, smoothness is beyond incredible, I will end up with a slab flattening table at one sixth the cost. I can't say enough good things about these guide rails. Be prepared to be blown away too !

A superior set of linear guide rails. Exceptional build quality. Smooth and quiet. Precise accuracy. I used these with the SpeTool router sled. All the screws included with the tool exactly fit into the rail bearing blocks. I now have a very professional router sled for a very affordable price. This is my current favorite jig in my home shop. Exceptional value with high build quality, and durability. Highly recommended!

These are not to bad for the money, however the bearings have more slop than they should. I would think you should not be able to feel any slop but there is some and there is no way to adjust. For my purposes this is not a problem but be aware of the looseness. And the mounting threads are not tapped very deeply - plan on chasing the threads (M6) and deepening them if you want to use decent-length screws. I like long screws in aluminum. The hole is the right diameter for tapping deeper, no drilling needed. Like I said - they work fine in my app and might in yours too.

I have used these rails for my DIY router sled for flattening my wood slabs or projects. The bearings work well and ride smoothly over the rails. Nice quality of the materials as well.

Very cost effective. Well made. The roller bearing sliders are solidly made and have threaded mounting holes to attach your workpiece to. The running rods are hardened steel and quite difficult to cut to length. I had to grind the ends after using a cutting wheel on them. It took me a couple of hours to cut and clean up the pair. But they do a fine job at a great price. I’ll buy more when I have another project.

very good! accuracy!

excelente producto, y mucho mejor precio

It took two buy and returns ( Amazon makes the process pretty easy ) to get two perfectly straight rails but you have to keep in mind how much you've paid. That's not to say they are all bowed but one of my first order was so maybe some QC issues. Once I had it sorted out, I was able to " dial " them in for perfect movement on the rails. I also got a shorter pair for the cross rails on this router slab sled that I'm assembling. I add slightly undersized rubber washers to each exposed ends of the slide blocks to prevent any dust build-up or contaminating the bearings. I haven't noticed any deflection in the 20mm rods. They are plenty stout for the length of the rails in my router sled application. It's been almost a year of 2-3 times a week usage with zero issues.

Ottimo prodotto

Produit de très bonne qualité un peut lourd mais correspond bien a mes attentes j ai acheté pour la fabrication d un chariot de coupe parallèle a ma scie sur table et cela fonctionne très bien