Spigen Liquid Air Designed for Google Pixel Watch 3/2/1 41mm Case Anti-Scratch Protective Soft TPU Cover (2024/2023/2022) - Matte Black

I'm very happy with this purchase. For a variety of reasons. The charger system works well. I just slid my charging cord plug end, up into the black charger stand. I have not fastened it, as haven't really needed to. It stays in place, unless you are not careful at all, with things. Okay, the obvious thing ... it DOES change the overall appearance of the watch. If you bought the watch, mainly to get a 'cute-looking' watch, then you may not be happy with this set up. BUT ... I think it gives the watch a different type of cool look. A little more on the rugged, divers-watch look. Yet, not over the top, by any means. The guys who buy this, will definitely enjoy the look. And, many of the gals. ** But, it took me a couple of days of seeing it, and losing the image of that 'domed' watch face look, before it grew on me. It gives the watch a bit more of a hefty look. But again, it's not, all all. Here's the main selling point, in my opinion. It protects your watch, AND it helps you get past the complaints of 'my watch face KEEPS fogging up/gets water under the (3rd party) watch protector cover that I bought". I smile, reading folks complaints' about the watch cover they bought, NOT being waterproof/sweatproof. Seriously??? There's nothing about anything, that you'd snap over the top of your watch face, and it HAS HOLES on the sides, that would KEEP moisture out. That's not complicated. Yet folks are EXPECTING it to DO that. For this watch case, I bought it, and also a small packet of watch face screen protectors. I applied one of the screen protectors FIRST, and then installed this watch case cover. I now have a cover that protects the sides, and back of the watch, the screen protector protects the watch face, and I don't have to worry about sweat or water, getting UNDERNEATH all those other 3rd party watch covers. This cover does NOT have a built in screen protector. It's open-faced. (That's a good thing). That's why you install your own screen protector. MUCH better, all around setup. Athletes will enjoy, NOT having sweat/water buildup under their case. So, if you are tired of removing your snap on covers, that have a built-in screen protector, just so you can DRY IT OUT, give this set-up a try. I was originally 'sold', on those snap on cases. But, having to remove/install them, every time I worked out, was a deal-breaker. Yeh, my set-up costs a few bucks more. But I'm so glad I switched.

Very easy to install. This also has a real nice black color. It protects the watch from bumps and accidents like hitting the watch on surfaces. Does not have a screen protector so that's a must get item as well. The charger base is simple to attach to the quick charger and the charger base is magnetic on the bottom, which is helpful for me since it will mount to my bedside lamp base and not move. The charger base does not slow down charging speed.

The case is easy to put on, fits securely, and the charging adapter works well. It's slightly harder than the silicon of the default pixel watch 4 band but still comfortable. It's good protection for everyday wear and a better look than a broken screen, but I'll be taking it off for formal events.

Great protection and peace of mind. I think I received the updated charging attachment, but it is still harder to charge this with the case on and the magnetic pull is not quite as strong. 5 stars for the actual bumper case, 4 stars for the charging solution, but it does mostly work and I saw from other reviews it was worse before the update. Really blends in with the obsidian 41mm not sure how it looks with the other colors. It has a tight secure fit and slides on. I don't think it is meant to come on and off so I clean around it. No scuffs I can see to my actual device or the outside. Nice to get a case from a reputable company like Spigen for this device. Wish they sold the adapter for chartot packed an extra in case of getting another charging unit for another location.

Fits my Pixel 4 watch perfectly and was easy to attach. Not only does it protect the watch dome, but it's also rubbery, which helps hold my watch securely on my wrist. The charging adapter works well, too. Good quality, very satisfied.

The cover looks great and we will never use it. Thanks anyway. LETS TALK THE MAIN EVENT! The charger is CHEF'S KISS. The Spigen charger uses its own magnets and from the bottom is the plugged in Pixel 4 wire you get with your watch (Usually). I applaud Spigen who seems to have given up on the place their wire on ours and instead says "NAH UNDERGROUND THAT WIRE AND CHARGER our black Spigen makes it a cleaner desk charger. BRAVO! ENCOURE!

Be mindful this does not include an additional charger, only a needed adapter stand for your current charger. I am not sure why some people think they are getting a $30 charger included with their $17 case purchase. The charging adapter works excellently; this was my concern before purchasing because I had read so many cases fail to allow charging with the case on. The case adds a a nice lip of protection that extends higher than the screen edge all the way around to help mitigate damage from side impacts. The case is super simple to slip on. The side button still works just fine through the case's button that covers it. The watch can still understand my speech without issue. One of my only gripes I have would be it adds a little bit of bulk to the bottom of the watch that may cause some discomfort while bending your wrist up or if you have the band rather tight. My only other gripe is I wish there were color options aside from black.

This works well for its intended purpose. To be clear, which is not shown or spoken to in the description, is that this does not have an actual screen protector. It's a bumper guard that goes around the watch case. I can attest. It does indeed protect the watch and to an extent the screen. However, understanding that there is no actual covering for the screen, you can still damage the watch face with this on. The reason for the the three-star review, is wearing comfort. The underside that is touching your wrist all the time, is not rounded or smooth. Instead it's kind of a squared off or boxy shape. Depending on how you think about it. The end result being it's constantly irritating your wrist. Removing it and putting the watch back on is a much more pleasant experience than having the watchguard on because of that irritation. I think if you were in an environment where you needed to protect the watch from a lot of bumps and not wearing the watch was not an option available, then this would be a good solution. But for the average person, considering the slight bulk that it adds and the discomfort that it caused for. Thanks, I don't think this is for most people. The problem is because this is not an Apple device. There's no industry to backup the accessories. So you get these half baked products put on the market because you don't have any other choices available. I would tell you to look into a real screen protector for the watch but most of the products out there like all have the same issue. They don't properly fit the screen because it has rounded edges. So if you've been here this long, thanks for coming to my TED talk and consider what you're getting into when you purchase this product.

Equivalent to buying a case for your phone, here is a case for your watch! Excellent fit for the larger Pixel 3 watch, allowing access to controls, microphone and speaker. Well built and design with a raised lip to protect the watch face

For the people that saying the Spigen is to lose ! And the Caseology is more tight ... I have them both and the Spigen is more tight then the Caseology.. You're welcome 🤗

Aide bien la PW4 en plus charge bien sur le support comme annoncé la ou le dock officiel seul n'y arrive pas dès qu'il y a une coque

Amazing fit. Good product

The case serves its purpose of protecting the watch and especially the screen from bumps and small scratches. The only issue i would say is the difficulty in removing the bands when the case is on . And well for me so far there are no charging issues