Fix Light Cure Super Glue with Fast Curing LED Light, 5 Second Bond, Repair Glue for Eyeglass Frames, Phone Cables, Costume Design and More, 0.14 oz

Spectacular science is at work here.. This adhesive quite literally cures under UVA light. You apply it to your part which requires repair, hold it firm, turn on the compact single (extremely bright!) UV-A L.E.D lamp that is included with the adhesive.. pass the UV light close by the glue, and move it about so that all the glue is shined on, and then within about maybe ten seconds maximum, the adhesive is fully hardened and the repair is complete!! No more sitting there, holding parts together for twenty minutes while you blow air on it or something .. this stuff saves a ton of time. Just dont be applying it to something while in direct sunlight or the sun itself will end up hardening the glue before you realize it! Sunlight does of course, emit all UV wavelengths of light, so be mindful of that and just use it indoors. You are gonna love this stuff, but you'll likely run out of it before you know it. The green plastic housing actually contains a small metal tube container (like a typical metal tube of cyanoacrylate "super" glue is usually sold in. The inner container is a bit small, so it doesnt last all that long, however, many many repairs will be made during its time!

The best glue ever! I even fixed my broken glasses, and they are still like new a year later. The glue literally creates a strong plastic bond when cured with the light. I was bummed when it was out of stock for months. I just received a new one today and was able to fix my blender motor housing that came apart. Please don't ever stop making this glue!

The TOP GLASS shelf of the table in the picture unexpectedly fell off. It was held on with clear UV glue at two mounting blocks which is screwed to the chrome base. They are in the back where the lamp sits. Following the instructions I cleaned the surface and carefully marked the mounting points - which turned out to be the hardest part of the repair. Applied the UV Glue, and used the supplied UV LED light to initiate the process. I left the mounting blocks and the glass for whole day in sunlight on my patio. Then mounted the glass with the screws and blocks back to the frame and crossed my fingers !!! You can see the mounting blocks better on the bottom glass in the picture. It is now about month since I made the repair and the picture shows it worked perfectly. The bottom glass was mounted by the factory and shows no sign of failing - YET! Recommend as long as you clean the surface with acetone and alcohol and use the glue sparingly and start the process with the supplied UV LED light. Getting the mounting blocks set properly and in the right location during the process is critical, since once the glue adheres there is NO WAY to adjust the mounting blocks.

This superglue works great the first time you open and use it. You pretty much just turn the cap until you hear a click and that means the cap has punctured the seal and you can begin use. You can squeeze on the sides in order for it to come out. If you are able to use the whole thing then it is great but this does not store well even if it is completely (capped) sealed. I thought it would last awhile so long as you air tight it but honestly it did not store well the next time I used it. The glue becomes more of a putty after a few days. It will not squeeze out. You can still apply it and it will stick but it is super hard to really apply it evenly. You can use a tooth pick but it honestly just sticks to the tooth pick. It is pretty much worthlesss. The light is okay but it is easy to lose as it is not exactly attached to the actual glue piece. It does a good job with curing quickly but avoid looking directly at it. Overall I think this is not really worth it UNLESS you are going to use the whole thing at once. If you are only going to use a little bit just know it just becomes a putty after only a few days even with the cap sealed.

The product is very similar to the "Bondic" brand UV epoxy being a clear liquid epoxy that cures with UV light BUT with one slight difference. This seems to have superglue like qualities as well! Unfortunately, that seems to not work well in this mixture and takes a VERY long time to adhere/cure BUT using the UV light works great and in many cases I have repaired things and you can't even tell they were broken because the epoxy dries so clear!

The glue is awesome. It dries clear and even dries quickly when it’s laid on thick. The lights pretty puny and weak. I’ve used a competitor’s product from the local hardware store and the light was stronger for a similar price.

A game-changer in the world of adhesive products. As someone who has tried their fair share of glues, I was blown away by the performance of this product. The fast-curing LED light is a real game-changer. It sets the glue in just a few seconds, which is incredibly convenient when you're in a hurry. I've used this glue for everything from fixing broken toys to repairing jewelry, and it has never let me down. The precision tip allows me to apply the glue exactly where I need it, without making a mess. One of my favorite things about this glue is that it's waterproof. I've used it to repair my daughter's swim goggles, and the glue has held up perfectly. It's also heat-resistant. The size is also a great value. I've used this glue on countless projects, and I still have plenty left in the bottle. It's definitely worth the investment for anyone who needs a reliable adhesive. Overall, I highly recommend Krazy Fix Light Cure. It's a must-have for any DIY enthusiast or anyone who needs a reliable adhesive.

The good: Once you get this stuff to cure, it is SOLID. It does cure very quickly with the right amount of the right kind of light *(+2 Stars), but... The bad: There was no "Supplied LED Light" as noted in step 5 of the instruction. The packaging clearly has a place for it, so maybe the item sent to me was a QC error, but I can only write my review based on what I recieved, or in this case, what I didn't receive and since the missing part is fundamentally crucial to the product... *(-2 Stars) The Ugly: I have no points to bring against this product as "ugly". Honestly, I am bummed out. I really wanted to give this product a better review and this product is easily a 5/5 star product... if it is complete; but a light curing glue that is supposed to include the light source and doesn't is not scoring points with me. In conclusion, I do recommend this product as it does work. I was able to substitute a very bright LED flashlight for the missing "provided LED light" and that got it done, so all in all it works very well, just be prepared to improvise... *I start my reviews at 3 points, and give or take up to 2 stars to raise or lower the review based on my experience with the product.