NEEWER Photography 3 Roller Wall Mounting Manual Background Support System with 2 x Tri Fold Hook, 6 x Expand Bar, 3 x Chain, Load Capacity per Roller: 22lb/10kg

So this is great, I bought it for my salon as I frequently photograph my clients hair and I needed interchangeable backdrops. I think my only qualms are that I bought quote large paper rolls which according to my research online should have been fine. But due to the width and weight they are now drooping in the middle and making the process of pulling the paper up and down a bit of an issue. Honestly that's not much the systems fault as it is my own however it would be good if they made plastic or a thin metal tubing that can inside the rolls to give it more support. System is great and easy enough to use, I didn't install it myself but the guy that put it up for me didn't seem to have too much of an issue. Good bargain

This is a well made item which mounts easily. It’s quite heavy but spring toggles hold this in place on plasterboard/drywall with ease. The pole inserts are easy to use and grip the inside of the tubes I’m using really well. The “chains” are made of plastic but they’re sturdy and should last well.

Once again I'm very pleased going for a neewer product, it's not the best but it's the best at this price point and good enough to do the job. Only downside that either due to quality control or bad packaging/ transportation I got one of the spools chipped off. Other than that all well.

I recommend the product. Easy to install, no second person assistance is required. I did a test on one hook after mounting whether it will break off. I hung my weight and nothing happened. Tearz, I have a guarantee that 4 rolls of paper 2.75 / 11 meters in total weigh less than I do. I know it won't come off the wall. The system is to develop plastic but does the job.

Great product fantastic price. Easy to fit and install. I looked at getting a fabricator to make one of these for me, before I found this one on Amazon. It would have cost hundreds As euros to make a product that would not even come close to this one. Well done have bought two so far. I would’ve paid a lot more for this product. Don’t let the low price fool you Into thinking this is a cheap product. You get more than you pay for. Well done.

Works brilliant, really pleased easy Installation

This is a simple but useful way of managing the vinyl backdrop I use. The red laddered ‘cord ’ looks pretty tacky but works ok. Easy to install and seems like it will survive long enough to make it a good buy.

Easy to put up and very pleased with the quality of this in my small studio Space saving and also allows for seamless shots both full body and head shots Very pleased Update , Had an issue with the spindle on one end , no response at all from my email to this company . Some help would have been appreciated . Fixed now thanks to some DIY

かなりマニアックな商品なのですが、同党のものをこの値段で買う事は絶対できません。ロール紙を蒔く部分はプラスチックなのを改善して欲しい所ですが、この値段ならば文句は言えませんよね(笑)

Let me start off this review by reflecting on what my mother use to tell me, “you will usually get what you pay for”. First, I always read the poor reviews and then go back and read the good reviews. This help me to give weight to the poor reviews as to their accuracy. For all those complaining that the chain is plastic, I must say this, this is a $70 system and not a $600 or $1,000 high end commercial system. Really, what did you expect. Once mounted to my studios wall, my system is holding 3 107” x 24’ rolls of paper and 1 107” x 24’ vinyl roll. Consideration for what you are mounting, and its weight is vital to your mounting options. First let’s start with the mounting. Unless you have concrete walls, or you are going to mount this to a concrete floor, through away the mounting hardware. The hardware included with the kit is only meant to be used with solid concrete. The mounting brackets are drilled for all sorts of mounting options which I consider to be a big plus. Mounting to just sheetrock was not an option. I don’t care how many sheetrock screws you put in, sheetrock is not very strong and will weaken over time. After measuring I found that my studs were just a little to far apart. After consideration of putting up cross studs between two studs I discovered that if I only used the 4-outside hole on the brackets (they have 4 holes along each side and 2 holes in the middle of the bracket) and set the roller inserts to their max, the spacing was suitable for mounting the brackets directly to the studs. Using 3 ½” wood bolts (3” into the stud, drill piolet holes) I believe that my brackets will hold a couple of hundred pounds each. I did drill out the bracket holes just a little to accommodate a little larger bolt. Sense after I spent days coming up with this solution, I discovered that if you transfer your paper, vinyl to a piece of 2” PVC, you can cut the PVC to any length you want. This would allow you to mount to the studs where ever they are. I discovered this because I had to transfer the vinyl to PVC. Not because of its length but, because its center core was not big enough to accept the roller inserts. Now let’s get to using the system. The plastic chain is functional if you remember that it is plastic and not steal. You can’t go pulling on it like you’re lifting a garage door or speed rolling. I found that I don’t have to use the roller restrictor/locks for the paper rolls. This makes it much easier (less tension on the chain) to roll up the paper rolls. The vinyl is a whole different story as it is much heavier. First off, it’s to heavy for the plastic chains, they will break. You must tighten down the restrictor/lock so tight to keep the weight of the vinyl from unrolling the whole roll you can’t roll it back up. After trying it I ordered the backdrop holder for 42lbs with metal chain. Yes, it’s almost as much as the whole mounting set but, if your going to use 107” vinyl your going to need it. I also put a screw hook into the stud where the chain is. I unroll the vinyl and put the chain on the hook to hold the roll. This allows me to not have to tighten the restrictor/lock down which makes it easier to roll the vinyl back up. If you use a smaller (much smaller) roll you may not need to purchase the heavier holder. Try it with what comes with the kit and if you find it’s not suitable, order the heavier holder. If you’re going to use all vinyl, purchase a different system, this one is not heavy enough. All in all, considering the price and despite some of the issue, I am very satisfied and happy to give this product a 5-star rating.

El producto cumple perfectamente con lo que promete. Las cadenas de plástico son de una calidad acorde a su precio, sin embargo no son de baja calidad, son resistentes y fiables. Las agarraderas de la pared son de hierro, robustas y eso no se cae de ninguna manera. Absolutamente nada que envidiar a las de mayor calidad Los enganches a rosca que van unidos al eje de los portafondos son de un plástico robusto a simple vista pero a tratar como la seda. Se intuye que no se le va a poder dar mucha caña y hay que tratar con delicadeza porque eso si que parece un poco más débil, pero por ese precio y viendo los que hay en el mercado de mayor calidad, cumplen su función bastante bien. Los pesos son directamente los mismos que he visto con fabricantes de más calidad, osea que bien. En conjunto y por el momento, un buen producto y una buenísima relación calidad precio.

Ok

Receive their specific instruction. Better for the instruction to be visual, same as this item description. Good for them to provide the option to buy the specific metal tube together.