LVY 2In-2Out USB Audio Interface (Resolution 24Bit/96kHz) 48V Phantom Power for Recording Podcasting and Streaming (Grey)

I had never used an XLR device before, so I never needed an audio interface. However, when I finally dabbled in the world of XLR microphones and got the LVY 2In-2Out USB Audio Interface, I found that it actually resolved a lot of audio issues I had previously and am really glad I gave this type of device a chance.I have often found that USB microphones often suffer from a lack of gain, so I would always sound quiet without much ability to increase my microphone volume. Some USB microphones include a gain knob, but most do not. When I swapped to XLR microphones, using the LVY Audio Interface had an included gain knob for the XLR port, which vastly improved my microphone audio, to the relief of my online companions. And since XLR microphones can also be dynamic, I got the side benefit of much better filtering of background noises. The ability to swap to XLR was pretty much seamless with the the LVY Audio Interface and I am glad I was able to make the switch without problems.Another side benefit of this device is that it also includes a USB headphone DAC/amplifier that is of decent quality, allowing me to forgo a separate USB DAC if I wanted to. I often switch between on-board sound card (for speakers) and use a USB DAC to swap to headphones when needed using Voicemeeter. Pretty helpful if I wanted a backup DAC/amp or if I just wanted to minimize the number of USB connected devices.However, from what I understand, these features are basically a part of any audio interface and, to be honest, I don't know enough to say if the LVY is better than their competitors. From other reviews and further product/competitor research, I understand that these are on the expensive end and other devices can give more features for the same price. I don't have any experience with those other brands, but it might be something to look into.Since this is my first audio interface and it works well, would recommend a look at least, but with the caveat that there may be similar or better options for lower prices.

Very simple to setup for the first time. Product is thicker plastic better quality. Great for beginners learning to podcast. Sounds okay, not the best, but for the price its a great deal.

I got this USB Audio Interface for using in my DAW applications. I'm a bass player, and have been wanting to record some songs I've been coming up with. I'm using a Windows 10 machine, and it was completely plug and play. I've tested this with several different DAW applications available (free and premium), and it has worked with all of them. This unit does not include software, but there's lots of free options out there that you can use with it, along with your favorite paid applications you might already own.One of the things I found neat about this unit is the LED Peak meter around each volume knob. It actually does a really good job of helping you keep you signals in control. You want them in the greenish/yellowish range for best results. Red will start peaking out and distorting. The LEDs were a lot more responsive than I was expecting to see, too.Something else I think is worth noting, is that you can record from both inputs at the same time. Both inputs will be configured on your computer as the same hardware recording device, but if you record in a stereo track, the "Microphone" will be recorded on the left side, and the "Line/Inst" will be on the right side. Since it records in this manor, you can later separate the stereo track into 2 mono tracks, and adjust each instrument accordingly, if desired.The Microphone port on this is a multi-function port. You can plug an instrument into it using a standard 1/4" instrument cable (don't use +48v for this purpose), or you can also use a Microphone with an XLR cable. The "Line/Inst" Port only accepts a 1/4" instrument cable, and has a selector switch to change input sensitivity based on the source.As with any other interface like this, it does have some delay on the recording. This won't really matter unless your dubbing tracks. If you decide to dub tracks, you can use the monitor port on the front or the line out port on the back to hear your instrument playing along with the music without a delay. However, when you play it back, that's when you'll have your delay. I usually correct this by manually shifting the new recorded track to the correct starting position to compensate for the delay, and then it sounds as it should. This is not a fault of the device though - every USB Interface I've ever used has a delay, so this isn't any different.Overall, I'd say I've been pleasantly surprised with this device! The built quality is solid, the function is great, and it's priced very well. My recordings have been coming out sounding clean as well. For someone that's new to DAW, or just wants to add a channel or two of recording capability, I'd definitely recommend this device as good starting piece of equipment!

Hooking this up to my computer to test and review with available, free recording software, I quickly realized that I don't have any practice recording through an interface to a computer.But I was able to do basic proof-of-concept with a few recordings to Cakewalk and Audacity.It definitely works to get a signal from an instrument into a computer. I have Windows 11, and the device was recognized immediately without having to download any drivers, as others have noted.When I get down to actually recording some music, this is a tool I will need, and I'm glad to have this one ready to go.

This is my first audio interface, so I wanted one that seemed simple and straightforward. This one definitely meets that criteria. I needed to get an interface for an XLR mic I recently acquired since I didn't have any way to connect it to my computer. I was able to easily connect everything, and perform an audio test within a minute or two.The interface connects to the computer with a USB-C (interface) to USB-A cable (computer). My computer had 0 problems recognizing the interface. Keep in mind that if you don't already have an XLR to 1/4 inch (6.35mm) cable, you'll need to get one, as this only includes the cable needed to connect the interface to the computer. You'll probably need to fiddle with the volume knob to find the best balance. I assumed the mid-point would work best but I had to go closer to 75% to get my recording where I wanted it. One last quick note, it doesn't come with any audio software.If you want an interface that's great for beginners, I can safely recommend this one.