MAXPRO Skateboard Deck Guards Protector,Longboard Deck Edge Protection,Durable Shock Absorbing Rubber Cover with Excellent Grip Nose Guard and Tail Guard

These deck guards are pretty awesome. Great price first of all. Easy to install and customize. See my pics for how it would fit a somewhat traditional downhill board. My board has some pretty deep wheel wells and one side effect is that those areas are too thin for the guards. I had to cut them to size. They can be sized to fit with a quick trim of a sharp, heavy razor. I would practice the first cut or two by cutting the small piece leaving the rest longer than you need at first, but they can be cut without exposing the clips metal. After about a week of pretty heavy use on my electric I bent one off my board and was seriously disappointed, but the clips bent right back and clamped strong again. Great protection. No need for mounting hardware which is nice if you hate drilling holes in your precious deck. (I do) the only draw back is that with lots of use they can kind of “stretch” but as mentioned the clips can be bent right back. That’s just a trade off for something easy to remove and replace VS something with mounting hardware. I’ll definitely be relying on these for all of my boards.

Well, at first I was concerned due to the no review but like anything you can’t take it for face value.You might think your board need not protect and like to keep it real. But i am wrong, it reall work perfect on my board and awesome useful stops a lot of impact.My best friend got me this skateboard and I haven't taken it anywhere since my birthday... It means a lot to me and i would like to proetct the board deck from damage. I came Amazon and finally choose it. A very thick and durable rubber exterior that definitely saved my board from a guaranteed chip on the nose when I've lost control of my board. It's very easy to install,on the interior of the bumpers there are some metal clips that help the bumper maintain the shape and also help hold the bumper TIGHT to the board.5 out of 5 stars, good aesthetically and it looks like it'll keep my board safe from the off chance I let it slip and slam a curb.I'll definitely update this review when actually ride my board.

First off, these fit quite snug. Be careful to center the guard before securing it snugly, because you don't want to have to take these on and off too many times. I was worried they may slip from a missed step, bailing, or even road vibration. Not a problem. They have already saved my board a couple times and barely show any damage. They are fugly though. This is a purely functional item that does the job. If you like going too fast, are always pushing the envelope, or are just starting to learn these are a smart choice. If you are a venice beach hipster with a mini board, then this is not for you. I recently bough a new arbor long board since my 2 year old pushed my last one down a hill only to split the end as it smashed into the curb. So far it's taking a beating like a champ. It is also nice to rest my board's end on concrete without worrying about damaging it. Or picking up my board by tilting it up instead of always having to lift. I am happy to protect my $130 longboard. I will get these for my kid's board as well.

These are very good at protecting your deck’s front and back edges but now that i’ve had these for a few months I feel I can write an honest review. They are good, but not great. They don’t stay on super well so that is definitely an annoying factor when going over rough roads. If you spend the time bending it to form to the edge you want it on, it will fit better. The only other con about these is that they will scratch up the bottom of your deck no matter what. At the end of the day it’s not awful but it’s like “really?” These aren’t bad but I feel there are other better options out there. I think i’m just going to tape my front and back edges instead lol.

To be honest I was a little hesitant to buy these. I wasn’t for sure if they were going to be as good as they look / seem. Especially on a boosted board Mini X but I have to say, I am impressed. You can see in my photos that they have been installed and fit well. The only part where you might have some problems is on the back tail, the tail guard underneath sorta blocks these Guards from fully fitting over the tail but I have managed to get my to fit well enough. It’s a good material. It’s tough. I am confident of these to protect from chipping the board. I haven’t had any problems with them yet. I have boosted around with them and they haven’t came off. They fit really tight and well. I definitely recommend.

I haven’t used any other deck guard but I don’t think I will either. These guards do a great job protecting my deck and were super affordable. They are made of thick rubber with a piece of metal running through it, so they are beefy enough to take most crashes with a curb or other solid object, they easy form to any shape deck, and they install quick (no tools or anything). If the guard isn’t staying on the deck in some place just squeeze the top and bottom together and it will hold much better. I plan to put guards on all of my decks.

It was easy to apply to my boosted stealth board. It's not a perfect fit but just apply enough force and it'll fit. It came undone a few times when I bumped my foot against it but it's not a big deal just be mindful of your footing. It's better than the 3d printed tail guards; those are just plastic, and for $30 bucks ?? Get outta here with that nonsense. This product is strong, sturdy rubber that can withstand a good blunt force, and for only $9. The decision is easy. Happy cruising 🤙