Bike rack,BCR06

I live in a city where I'm able to use my e-bike for almost everything where travel is concerned. That said, I'm constantly loading, strapping, taping, roping and sometimes jamming (i know, i know...) items onto my bike. I've gone through several racks which look similar but just didn't last. Most wore out at the connections (inferior alloys) so that the screws became so loose the racks swayed under the load; resulting in cracking or bending which rendered them ineffective for future loads beyond a sandwich. Others just failed due to my own fault as I exceeded the recommended load capacity. All I can say is that when you're on your bike and faced with having to leave a valuable item or opportunity for one behind or try to make it work with what you have... well, you get the idea. The capacity for this rack is, so far, legit. I've had up to 130 lbs. of balanced laundry on it (a sea bag on plywood for stability) with no issues at all, other than having to do laundry in the first place (tmi). Also, no sway or listing which affected my handling. I have a heavy duty rear cage on it now. I'll be mounting removable grocery panniers next. Based on the storage and configuration of this rack, it's very versatile as to what you can mount on it. The size of the deck is about average, with slots for straps and the like. The key here, however, is the capacity to haul heavy loads without sway or list. Lastly, installation was quite easy for me. However, I've been through more than a few rack installations. The instructions aren't too bad, although you have to rely on the illustrations as the engrish is unclear. If you do get this rack, do not tighten the screws all the way until you have it all together. Also, the sliding adjustment for the protective spoke supports (you'll see) will need to have a specific Left/Right symmetry. Otherwise, it's pretty straightforward. oh, and there's a fender and a reflector. I was able to mount my existing rear light with brake sensor in place of the reflector without any modifications (bonus!). This is the best (bike) rack I've had under $75.00 to date.

The rack was as shown, correct size, very sturdy and strong. Paper instructions got the basic idea across, but the six images did not show the level of detail and clarity one would want, to say with confidence, that one is putting it together correctly, but it is doable. Even on the paper instructions, they say, "It is recommended to use the installation video on the product purchase page." Given the advertised 310 pound capacity, I had to try at least 100 pounds. It did hold the dumbbells and weights, as you can see in the pictures, but my bike felt extremely unstable, and did tip over when I lost focus for a moment trying to take a picture from another angle. I recommend thinking very carefully about what happens when something causes you to lose your balance while riding, especially if you're planning to load over 50 pounds on it. You CAN do it, but is whatever you're transporting protected or resilient enough to handle a crash or a fall?

Why did you pick this product vs others?: I wanted to upgrade from my standard rack which only carried 55lbs and this upgrade said it can handle up to 300lbs. To be honest, I’ve carried up to 100lbs on this system and it still holds up very well! Works well: As stated above, with 100lbs on the carrier, it works very well. I recommend that you look at how you want to carry your stuff but also, add to this if all possible with a box carrier on top of the rack to offer more capabilities and it saves from carrying pannier but I like mine cause I carry my tools and water in them. Value for money: Excellent price and holds up very well! Hardware included: All the tools were included but there’s no clear instructions on what goes where. Ease of installation: This part was honestly the hardest part. After installing the main piece, the rest became a guessing game. Once you figure it out, it’s not too hard but I recommend watching the video on here or on YouTube to understand what to do.

Good product. Assembly is little hard but good sturdy seat..

Fits fat tire 26x4 inch aventon adventure model 1 Should fit all 26x4 inch fat tire bikes However I was only able to get two of the supports to mount on to the bike also I didn't use any of their clamp-on style to the frame supports as my fat tire e-bike the frame in the rear is too wide and they didn't supply a variety of bolts ideally if I had some that were about an inch longer than what they gave me your 3/4 of an inch would be amazing... So that's why I gave it four stars instead of five, the other reason was the I can only use two of the supports as the third support that connects from the big wing arm in the back that has the cut out hole to the middle slot hole the piece of metal isn't long enough to make it fit so with a little bit of messing around with the parts and if you have some technical knowledge you can make this rack fit on fat tire bikes... I could go ahead and buy my own screws at the hardware store however it's not worth the hassle... As my bike had pre existing threaded holes for the fenders which I used those... I ordered foot pegs off Amazon as well and those had extra long variety of believe to be m6 /m8 bolts that I was able to make it fit with this setup.

This rack is very sturdy once installed. The aluminum frame feels solid and well-built, and it doesn’t flex much under load. I haven’t pushed anywhere near the advertised 310 lb capacity (and realistically most people won’t), but it definitely inspires confidence when mounted properly. The adjustable mud flap is a nice addition and actually useful in wet conditions. The reflector is also larger than most and adds good visibility for night riding. My only real complaint is the paper instructions. They’re not terrible, but they’re not very clear either. The directions do mention referring to the assembly video, which I didn’t do, so that may have helped. I was still able to get everything assembled without too much trouble. The only thing I forgot initially were the rubber guards, but they were easy to install afterward without taking everything apart. Overall, it’s a solid, sturdy rack with good features. If you’re patient during assembly and double-check the parts list, it’s a strong option for hauling panniers, bags, or a rear basket.

Waste of money. Lasted about a few months and now it's became so wobbly that my new saddle bags are wearing out! It was a pain in the @$$ to put together too! None of the pieces would tighten with the stuff they gave. At this point I wish I would've saved my money for something else!.

Solid and sturdy rack. Won't be testing the weight limit, only need to carry small bag or less than 20 lbs of groceries.

Very solid bike rack! I have a trunk and 2 saddle bags on it, love it!

Very adaptable and I believe well thought so that the load is spread over multiple points and well held. Won't bounce around. Easy to put together and to remove.

Fit and worked excellent. Very strong, kids friends use it as a seat to double up for rides.

great pictorial instructions made it fun to assemble. The side and top paniers fit perfect and don't get in the way of riding.

Feels strong. Not really happy with how high it is above the tire.