8K@60Hz USB 3.0 Displayport KVM Switch 2 Monitors 4 Computers, Dual Monitor KVM Switch with Audio Output and 3 USB 3.0 Ports, 4 Port Dual Monitor Displayport KVM Switch for 4 Computer

KVM for 2 monitors, 2 computers, all Display Port, with USB 3.0, power supply and wired remote switcher. Switcher has sticky back to stop it sliding around. No hot key functions. Decent quality 3 ft USB 3.0 cables are included. DP cables are not.Note you cannot connect HDMI from a computer to it without an active converter cable specifically for HDMI computer to DP monitor. HDMI monitors can be connected to it however with a plain cable with the correct plugs.Has 3 switched USB inputs, with mouse and keyboard that leaves one extra to switch a thumb drive, printer, USB headset, monitor hub etc. An unusual feature is the mic/headphone analog inputs. These don't pass through to analog PC connectors, they are hosted on the USB. Nice for switching an analog headset without having more cables or needing analog jacks on the computers.Update: The speakers work on my Koss 2-plug headset, but the microphone does not. I'm not sure why, it may be plug incompatibility due to lack of standards.Another nice feature is the power supply and power switch. Many KVMs are USB/video powered. They can only be turned off by unplugging everything, and can have issues getting enough power from the computers. This one is self-powered and turns off at the switch when desired. This allows monitors to power-save without having to turn them off. It will not power from USB or video.If additional power outlets are a problem for you, I strongly suggest searching for a Superdanny outlet panel.Works as expected, no video or USB issues so far. No problem with backlit gaming keyboard which can be problematic with others. All connectors are tight. I only wish it had screw slots to mount it so it wouldn't move around.KVMs tend to be short-lived for some reason, hoping this one is different. I will update.2.5 months in, still working. Have had a couple occasion where it lost connection to the keyboard. Power cycling corrected it.

I bought this in January 2024. I have 2 jobs and need to have constant feedback between both emails as I have 2 seperate systems. I chose this due to the size and the price. A lot of these are over $200. It worked fine until about two months ago the monitors started to flicker on and off while I was working and it would move all the items and tabs to one monitor. I'd have to move everything back. At first it was sporadic and no big deal but now the moitors flicker on and off constantly. I changed the cords thinking maybe it was a cord issue. No dice. When I plugged my cords in the back of the computer I had no issues. So by process of elimination the kvm switch was the issue. I finally gave up and bought another brand. Because of the size of this, the weight of the cords seemed to be a problem and the cords would tug on the back. I feel like that could be an issue. I did move the device closer to my computers and that didn't help either. It's just my opinion at this point. Obvioulsy for the price I feel these should last. It did for about 5 months. My opinion is to make the device longer and bigger so everything has room and cords aren't tugging so easily.

Very impressed with the quality and features of this kvm. It exceeded my expectations. Works well with my mac mini m2 and windows pc at 1440p dual monitor setup. Switching between them is very easy and fast. I love that the audio is connected via the USB so that it's not extra audio cables. No issues at all with nvidia gsync 144hz refresh rate, things feel buttery smooth. Only issue is occasional loss of sync/static on the rare occasion but I blame that on my cheap Displayport cables which I'll upgrade in the future. The box said "HD video processor" on it and I was scared I had recieved the wrong item but pleasantly surprised to find the correct 8k four pc two monitor kvm inside. Picked this up for what I feel is an amazing price for the features. Many much more expensive kvm boxes do not do what this thing does. To me it seems like the DP is a straight passthrough. My computers see the actual monitor that's attached. Only other thing I think could improve it, is having a fifth button on the remote switch box to remove signal from both monitors so that they go to sleep, and call that button "off" maybe. I wish I had found this KVM sooner. And I'm a very picky huge computer nerd so the fact that they meet my standards really shows they are making a great device.

It switches displayport and USB very well, maybe a second of lag between the switch. Seems to be handling multiple USB devices just fine.The audio DAC is ok for audio out, but the microphone input is terrible. It works on some headsets that have amplifiers, but for a raw microphone input from a Sennheiser headset - it doesn't work.(Note: I have had similar issues with USB DACs before, so it's likely limited to a certain microphone type. If you normally have to have your mic gain turned up super high, this will probably not work for you.)

I don’t do reviews on here too often however this KVM is awesome! I’m using it with a 16” m3 MacBook Pro connected to the Razer Chroma dock connected to this, a 12.9” IPad Pro, a Lenovo Windows Laptop and a gaming PC, The Logitech Bio, Yeti Microphone, usb Hub all work seamlessly! I have a crazy setup and everything works flawlessly! Screen looks phenomenal in 8k. I’m only getting 60hz but it still looks awesome and I have zero complaints! If you’re looking for a 4 device, 8k kvm don’t hesitate. I’m amazed that it all works and totally simplified my setup.

I have an MSI motherboard with dual DVI outputs. I connect my first monitor to one of the DVI outputs and my Belkin docking station to the other. I also have connected a Logitech USB dongle for my mouse and keyboard, a Dell camera, and a microphone. Everything works flawlessly when connecting from one monitor to another. It's a well-designed device.

En general funciona bien, soporta bien dos monitores: 4k@60Hz y 1440p Ultrawide @ 144Hz. No he probado con 8k. De entradas tengo una PC y una MacbookPro que usa un Hub para convertir de un puerto Thunderbolt4 a todas las entradas que requiere el KVM Switch.El unico detalle realmetne es que se tiende a calentar, especialmente si conectas dispositivos en los puertos USB. Solo lo recomiendo si te limitas a cosas como teclado/mouse muy básicos. En mi caso mis periféricos consumian mucha potencía y se estaba calentando demasiado (lo cual causaba otros problemas como que se desconectara un display por algunos segundos).La solución para mí fue no conectar los perifericos al KVM switch y en lugar concetarlo a la entrada USB de uno de mis monitores que tiene un USB HUB, y luego conectar los periféricos al monitor que los alimenta sin problemas.Ya con esta configuración me ha funcionado muy bien. No he probado si todo el set-up de conexiones agrega algun nivel de lag a mis dispositivos de entrada (o respuesta de mis monitores), me imgino que es posible pero nada que haya sido perceptible para mí.

I purchased this KVM exactly a year ago and so far, it has worked well enough to support all my needs. I'm listing my specs here to give you some idea of what this KVM supports, because I recall how difficult it was to find solid information of whether I could run my setup with any of the Amazon's listings and manufacturers' descriptions.I have 2 systems (Macbook Pro (Intel, 2019) connected to an external GPU in Razer's Chroma Core X with AMD RX580 inside) and (a Desktop PC running dual boot Windows 11 and Debian 12 running RTX 4090). For my displays, I use 3 of the Dell's U2720Q displays, each running at 3840x2160 at 60Hz, 10bit-colour. I use display port cables (on both ends) for each of the displays and for each of the machines. HDR works across all 3 monitors (although these displays aren't great for HDR with their peak brightness of 400nits, so I have it disabled).The good news is, this KVM supports it all across both systems, including an USB3 microphone and a mouse and keyboard, all at the same time. The ports are located in sensible places, and all my devices show up correctly across both systems and all 3 OS's. Debian was the most problematic to get the NVIDIA drivers going and it took some doing, but I got it to work in the end.I've only encountered a handful of issues which others highlight here too, particularly when waking my Mac up from sleep after switching the input back from a different machine to Mac. This doesn't happen every time and it happened sporadically, maybe 5 times over the course of the past year (same display displayed across all 3 monitors, flickering in and out; restarting fixed the problem). I don't move any parts of my setup and the cables have plenty of slack, so it must be a problem with the KVM itself, as others have suggested too. It's not a deal breaker by any means and happened rarely enough to not really be an issue, but worth highlighting that it's something that can happen...Overall, great device for a great price and well worth it if you have to constantly switch between monitors. It will save you having to replace either the buttons for you on-screen display, cables from constant switching or most importantly, ports on your GPUs. These all have a fairly limited duty cycles and aren't the most robust, so investing in this KVM will probably save you money in the long run.

今のところノートラブルで動作しています。この品質でこの価格はかなりコストパフォーマンスが良いと感じました（DisplayPortケーブルは付属していませんが）。購入する前に唯一不安要素だったオーディオ出力はUSBオーディオデバイスが新たに追加されKVMスイッチ前面のオーディオ出力端子から出力されます。ちなみにこちらの動作環境は4K60Hzシングルモニターです。8Kとかデュアルディスプレイは試せていません。

自作のWindowsとM1マックの2台持ちで3つのモニターを使っています。物理ボタンひとつでモニター3台・マウス・キーボード全て切り替えられるので重宝している。8Kまで対応しているのもありがたい。もっと早く買っておけばよかった。