4K 120Hz HDMI 2.1 Switch 4x1 eARC Audio Extractor VRR ALLM HDCP2.3 ARC HDR10 CEC SPDIF Optical and 3.5mm Audio Out,HDMI Switcher 4 IN 1OUT IR Remote D-olby Digital EDID for PS5 XBOX NVIDIA AMD

Purchased Sonos Arc with no passthrough. This is feeding from Sky Stream, Apple TV and Blueray. Encountered a quirk with the optical out to my Sony headphone base station with Apple TV - I just forced Apple TV into 5.1 output and that sorted it - minor issue if I don't want to disturb the neighbours. Sonos App shows Atmos is present - not that I would rave about the impact of Atmos on the Arc. Guess I need Era 300 surrounds - sigh! Compatible with my Harmony remote which helps.

The ease of use, the sound quality, picture quality and 4k support is an absolute game changer! I had been struggling to get anything remotely looking like DTS Surround from my LG TV, this little box means I can now have DTS (not MA/X because I have a Sonos) but I have even got a way of mixing down the DTS MA to Dolby 5.1 with the click of a few buttons. Great value for money and would highly recommend.

Had so many issues with this so returned it. Kept needing to be rebooted, loads of audio dropouts all the time and incorrect audio being sent randomly.

Well, it works. It's not 100%. Hopefully, I'll get an update? Playing a 4K Star Wars movie very now and again the soundtrack cuts out of a split second, And it's very now and again! It can be very frustrating as it is random. It done it again on the 4K the Abyss . But it seems ok on the blu ray! But I will need more testing as I haven't played all the way through on a blu ray at the moment. It seems ok on streaming .But I have a problem with the sound as it's not as loud as the HD fury and it seems to have a small A/V Sync, but I'm not 100% sure on this. It as Sorted out the rainbow effect on my Optomo that's one good thing. One thing I don't like is the plug in for the remote. Hopefully the next one will be better! A week later I'm happy to say it works 99% I'm still not happy with the A/V sync on the 4K but a cheaper then a HD Fury. I'm thinking about getting one more 🤔. Update you need to reset it sometimes ie unplug it to get working again fully ie get Dolby Atmos back. Still not 100% on blu ray. I'm going to fit an on/off switch on the main lead so I won't need to unplug it or take out the main lead out of the back of it. It's my work around as it be easier for me in the long run.

I got this to switch between my Sky Q box, Apple TV, PS5 and Series X to my projector, whilst taking an eARC signal to my Soundbar. It does all of this perfectly, no noticeable lag whilst using the consoles and the 5.1 has never sounded so good. The remote makes it easy to flick between the four inputs. For this it gets three stars. It loses two for being an expensive unit that needs to be rebooted every single time you want to use it. Even if it’s only been off for 10 minutes. I hoped going through the painfully bad Chinese translation of updating the firmware would solve the issue, but unfortunately it hasn’t. I was going to hide it behind the media unit, but it has to be easily accessible to pull the power cable out and straight back in. It’s not enough of a problem to send it back to replace as others have reported the same problem. Fingers crossed the manufacturer sorts this out in future updates.

My modern-ish TV does not support eARC fully - i use a Sonos Beam Gen 2 (with sub and surrounds) - and it often got inconsistent Atmos across services/players - it wouldn't work with my Sony 4K player. This product resolved this issue for me. Perfect and consistent Atmos support across everything I need. Only downside for me is the annoyingly bright blue LED lights - resolved by black tape so not a massive problem.

I wanted to like it. In theory, it was ideal for me. However, I seem to have faced all the problems mentioned in the reviews :(. Maybe it's the fact that I'm using a PC and a monitor... What I experienced: - Black screens - Audio cutouts - Only stereo through ARC, both with Copy mode and even with Atmos 7.1 setting. - No 240Hz @ 3440x1440 (only 120hz) The only way to make it output 5.1/7.1 to my AVR was the Atmos 7.1 setting, and even then, only in HDMI input mode (as in, connecting to an input on the AV receiver, not the ARC port). I don't know why, but I could believe this is the fault of my very old Yamaha receiver... I had to try all combinations, and nearly gave up, before I discovered this one that worked. The above setup would have been fine, of course. I used it for about two days. However, the display going black or the audio cutting out occasionally, I couldn't ignore. It was way too distracting. Argh :( Another thing to note is that the Copy function seems to copy my monitor's audio setup, which of course is only stereo. Why can't the EZCOO copy the audio setup of the AVR instead? That would have allowed Windows to output 5.1 audio. I imagine that's a problem that will affect most standard TV + soundbar setups, so it's strange that the device defaults to the Copy mode. I admit I'm not an expert, so I could be wrong about all this. My setup: - Monitor with HDMI 2.1 - Resolution: 3440x1440, 21:9 aspect ratio - I also tried with an older monitor with HDMI 1.4, I think - also 21:9 - GPU with HDMI 2.1 output - HDMI 2.1 certified cables. 2m max length each. From the GPU to the monitor, the total length of the cables was 3m: GPU -> 1m cable -> EZCOO -> 2m -> monitor (also EZCOO -> 1m -> AVR). I don't doubt it works in other set ups. More conventional ones, perhaps, like 4K 16:9, with no PC involved. It might be worth a try for you.

I have a Loewe TV and they are a real problem with external soundbars so I decided to try this HDMI switch. This works 100% on all my devices using the soundbar as audio source. I have tried 3 other cheaper versions but they don’t output 5.1 & 7.1 Atmos, this one does. £150 HDMI switch is cheaper than a new TV, highly recommended.

Funciona perfecto, el eArc me funcionó sin complicación, imagen y audio asombrosos.

C’est ce que je cherchais. Pouvoir envoyer la piste sonore et la vidéo sur 2 flux distincts Vendeur compréhensif après un soucis sur le produit Je recommande

EZCOO 4K 120Hz HDMI 2.1 Switch 4x1 eARC Audio Extractor Avevo bisogno di un dispositivo che mi permettesse di collegare la mia soundbar con Dolby Atmos al monitor Corsair Xeneon 32UHD144, per poter sfruttare il massimo della qualità audio mentre gioco con la PS5. Il problema era che il monitor, pur avendo porte HDMI, non supporta eARC, quindi non era possibile ottenere l’audio Dolby Atmos direttamente dalla console. Questo switch HDMI ha risolto il problema in modo perfetto: estrae il suono direttamente dalla PS5 e lo trasforma in eARC, permettendo così alla soundbar di riprodurre il Dolby Atmos senza alcuna perdita di qualità. Funzionalità principali Ingressi e uscite: Dispone di 4 ingressi HDMI 2.1 e 1 uscita HDMI 2.1earc più un ulteriore uscita per HDMI earc per soundbar, permettendo di collegare fino a quattro dispositivi (come PS5, Xbox, PC, ecc.) e selezionarli con il telecomando. Supporto 4K 120Hz: Perfetto per il gaming di nuova generazione, compatibile con PS5, Xbox Series X e PC gaming avanzati. Compatibilità con VRR e ALLM: La presenza del Variable Refresh Rate (VRR) e della Auto Low Latency Mode (ALLM) assicura un’esperienza di gioco fluida e senza lag. eARC e estrazione audio avanzata: Il punto di forza è la possibilità di estrarre l’audio direttamente dalla sorgente HDMI e convertirlo in eARC o inviarlo tramite SPDIF ottico o jack da 3,5mm, rendendolo compatibile con soundbar e sistemi audio di fascia alta. Supporto per Dolby Atmos e DTS:X: Garantisce un’esperienza audio immersiva e senza compromessi. Compatibilità HDR10 e HDCP 2.3: Mantiene la massima qualità video con supporto per HDR10, HDR10+, Dolby Vision e HDCP 2.3, permettendo di godere di contenuti protetti senza problemi. CEC e EDID avanzato: Supporta il Controllo Elettronico dei Consumatori (CEC) per la gestione dei dispositivi collegati e dispone di impostazioni EDID per la compatibilità con diversi formati audio e video. Materiali e qualità costruttiva Il dispositivo è costruito con materiali di ottima qualità. Il telaio in metallo garantisce robustezza e dissipazione termica, evitando surriscaldamenti anche durante lunghe sessioni di utilizzo. I connettori HDMI sono solidi e resistenti, assicurando una connessione stabile senza interferenze. Conclusione Se avete un monitor senza eARC e volete sfruttare al massimo l’audio Dolby Atmos da console o PC, questo HDMI 2.1 Switch 4x1 eARC Audio Extractor è una scelta eccellente. Ha risolto il mio problema con la PS5 e il Corsair Xeneon 32UHD144, permettendomi di ottenere la massima qualità audio senza compromessi. Perfetto per il gaming di nuova generazione!

The device is handy but I'd like it was more simple. I still don't know what the left buttons are for but It does the job. My complaints are that it won't let me update the firmware because the software becomes unresponsive after opening it. Also, to have to put a sensor for the remote looks ugly and messy. After a while I lost the remote and I have to change channels manually or it will switch automatically to other channels when I turn something connected to it. Sometimes I will also get stuck and I wont get any sound until I unplug the power and it resets. Very annoying.

Es funktioniert einwandfrei und wie beworben. Jedoch ein paar Hinweise: Man sollte den expliziten Hinweis auf "HDMI 2.1 Kabel weniger als 3m" ernst nehmen. Bin vier 3 meter 8k Kabel durch, die alle kein stabiles 4k 120hz Signal hin bekamen. Ein "optisches hdmi 2.1 Kabel" ging zum Glück dann aber doch. Die können scheinbar diese Einschränkung umgehen. Eine weitere Einschränkung ist, dass alle HDMI Eingänge als aktiv gelten, so lang das Gerät eingeschaltet ist. So denkt z.B ein angeschlossener PC es wäre ein extra Bildschirm vorhanden, selbst wenn als Eingangsquelle z.B. die PlayStation eingestellt ist. Ich wünschte die Stromquelle wär USB. Dann könnte man den switch automatisch vom Strom trennen, wenn man ihn am USB vom Fernseher/Projektor steckt.