ECO-WORTHY Upgraded 45in Solar Panel Mount Brackets, with Foldable Tilt Legs, Suitable for 2pcs 100W/1pcs 200W 300W 400W Solar Panels,Adjustable Mounting Brackets Kits for RV, Roof, Boat, and Off-Grid

I was fortunate to snag four boxes of these for my vehicle solar. I have 4 - 400 watt residential panels on my custom conversion and wanted something to A. Help increase solar production at larger equatorial distances (the further away from the equator, the more angle you would want) and B. Help water from pooling on the flatly mounted panels when the vehicle is static for longer periods of time. Here are my observations: Pros: > Well packaged and protected hardware. > Appropriately selected and sized bolt hardware (not cheap rusting/easily bendable hardware). > Strong Angle Brackets, I was impressed at how sturdy they are. > Clear instructions which helped aid installation (my install was a bit different than some. Cons: > None so far. Recommendations: > Especially for vehicles - thread lock permanent connections to prevent loosening from vibration. > Plan out your install, I at one point accidentally installed one panel backwards not paying attention - panels should generally all tilt the same direction for most installs. > Temporarily disconnect any active arrays to avoid shock on accidental disconnect. > Plan for extra panel wire length so that as the panel rises, the wire has slack to not pull to hard.

Surprisingly solid mounts. I’m very happy with purchase

As advertised, no issues, easy to assemble, Not "heavy duty" but seems strong enough. All parts needed are supplied. It's parts, cut properly with adequate instructions and everything fits with no struggles.

I mounted a pair of solar panels to the back of my garage with two of these brackets. They are sturdy and easy to install. Setting the desired elevation angle was simple.

Nice light weight and strong ground mount. Worked good with my 200 watt panel. Ready to put together, would be nice if the adjustment was easier to change.

Super bueno y asegura perfectamente mis paneles. Se sie ten ligeros pero al colocarlos aseguramos por completos los paneles. Es una muy buena inversión para mantener segura otra inversión jjjjjjjjj.

This kit exceeded my expectations. High quality aluminum angle pieces, with pre - punched holes, and slots. The complete hardware kit was enclosed in the package. The included bolts are 5/16 X 1", and fit the holes in the angle pieces perfectly. Each kit also included 6 knob bolts, for easy adjustment of the panel angle. No instructions were included, but I had no difficulty in assembling the bracket kits to the panels. Lay the pieces out, next to the panel(s); and think it through, before putting the bolts in. My particular solar panels were from HQST, which required 4 mounting bolts 3/4" X 1/4". I did not mind supplying those 4 bolts, and lock nuts. I recommend this kit, and would buy it again. Update: 3-11-20 The hardware is Metric, not SAE. I think it is stainless steel, also. I found that in some configurations, it may be necessary to trim the corners off the slotted angles. to have adequate movement for use of the slots for fine adjustment. I still like the kit, and recommend it. Having checked prices for aluminum angles available locaslly, I could not find slotted aluminum angle, but what they did have locally, was pricey, confirming to me, that this kit seems to be a good value. adjustment slots

You truly get what you pay for. Take a close look at the aluminum angles, These are noticeably thicker and more robust than what you'll find from most other sellers. I initially searched for a more budget-friendly option, but quickly realized that cheaper alternatives often use thinner materials. That’s the trade-off: lower cost usually means lower strength. These aluminum angles are a solid 3mm thick, compared to the 2mm used by many competitors, which makes a real difference in durability and stability. I used this mount on a 445W solar panel weighing around 50 lbs. To reinforce the base, I added redwood fence boards, which significantly increased its rigidity—it now feels rock solid. The goal for my setup is being mobile rather than permanently fixed, allowing me to reposition the panel throughout the day to follow the sun. As shown in the photos, flexibility and strength were key priorities in this build.

Installed 2 No. 100W panels onto the mounting brackets and they work well and are easy to assemble with and operated nut and bolt. The solar panel mounting brackets are supplied with the panels. I've got the whole setup on the ground and it wobbles a bit but nothing concerning. If the brackets are fixed to something on the bottom rail it would be very solid. Very good system.

Profilquität gut. Veraebeitung im ganzen gut Schrauben sind von guter Qualität, rostet nicht. Handwerker muss man dennoch sein. Erfüllt seinen Zweck. Preis geht so, kann man im Baumarkt auch selbst zusammemstellen.

Me ha llegado el envío abierto, le faltan tuercas. La bolsa de cierre hermético donde venían los tornillos, venía rota...

good sturdy and great for off grid RV and camping. Easy to set up and move and great for portable foldable solar blankets.

I have purchased and used 2 of these brackets. In more than a year of use I have had no problems. These Eco-Worthy brackets are easy to setup and versatile. I have 2 100 watt Eco-Worthy solar panels on each bracket and find that at a good angle I have less problems with snow. I recommend these brackets to anyone using proper sized panels.