GuliKit Hall Effect Joystick Module For ROG Ally X, Anti Drift Electromagnetic Analog Thumbstick Upgrade Replacement with Official Compatibility(Not for ROG Ally)

Very easy to replace, they were dead center calibrated from the pack, the feel of the pressure on the axis is more constant no matter of the angle you press them and fact that the stick drift is gone makes them an amazing purchase in my book. I was worried for some comments that they come with drift but at least on my unit, everything was perfect!

Left stick works great, good feel, exactly what I was looking for, and it calibrated perfectly. Right stick DOA it's stuck to the bottom, can't be calibrated. Swapped it for the oem and it works fine so I put in for a replacement and will wait to see if that fixes it. They get one more shot.Edit - Another bad set, same issue, stock ones work fine so not an install issue it’s definitely the sticks. Disappointed but it is what it is, I tried to reach out to support and found there was none which is sketchy on its own assuming something were to happen outside of the Amazon return period. I’d wait until a better company releases their version.

Easy swap!! & working great thus far.Here are important Tips:1. When removing joysticks, definitely ensure the battery is disconnected before removing the ribbon and/or joysticks2. Take your time to remove Joysticks3. Don't forget to remove the Joystick caps from old and place them on the new boards before installing new joysticks4. Reconnect the joysticks ribbons!5. Don't forget to plugin the battery4. If you are going to test/try them before fully closing up your Xbox Rog Ally X, you may need to plug in the charger to bypass the light sensor on the backboard, otherwise your Xbox Rog Ally X may not boot (happened to mine).5. Upon boot up, you will need to re-calibrate as the sticks may have dead zones beyond the normal.You can use the following site to test your new joysticks (hardwaretester . com/gamepad)1. Just open the above website on your preferred browser on the Xbox Rog Ally X2. You may need to click on the Command Center button (left button - top most nest to the screen)3. Once Command Center opens, located the toggle labeled 'Control Mode' and change it to 'Gamepad Mode'4. Now your input should work on the page and be detected properly.5. Take a look at all 4 Joysticks Axis, and see what your dead center Axis looks like, if its anything lower than 0.05, then it is considered highly precise. (I got 0.00002 which is AWESOME!)6. Next you need to Test Circular motion, click on the 'Test Circularity' option to enable it7. Slowly rotate the joysticks in a smooth circle 3 to 4 times, you will see what is like a circle form with different colors and with a text that states 'Avg Error %', this is the number you need to put attention.8. If you get under 5%, your perfect, if you get something higher (like me, I got 18.5% on the left joystick & 20.4% on the right joystick) you need to continue to calibration.9. Open 'Armoury Crate' from desktop and click on 'Gear' icon on top (if it does not open to that screen)10. Select 'Calibration', then you will need to perform the calibration for 'Left Stick' and 'Right Stick'11. Steps are simple of center calibration, 4 pointers, then circle motion (3 times) (You will need to back out by pressing B when calibration completes to get back to 'Calibrate' and select the other Joystick.13. Once done with both Joystick, you can go back to the website and re-test.After re-testing I got 4.1% on the left & 3.8% on the right, big difference and its was definitely much more circular after calibration.Hope it helps!! & Thank you for making a great product!

Easy install. Feel great, have had no issues..good peace of mind for no stuck drift. Remember to recalibrate the sticks in amerory crate after install

Responsive, will last a long time, easy to install.

I managed to get a working set, but only because of the Amazon return policy. I read the reviews before ordering and saw that they’re not 100% reliable out of the box, and I found the same thing.On the first set that I received, the right joystick worked perfectly but the left one was completely non-functional. I swapped my original left joystick back in and requested a replacement.When the replacement joysticks arrived, I tried the new left one and it worked. It took me two sets to get one good set, but honestly I kind of expected this. Perhaps the testing at the factory isn’t that great before these are shipped out.Anyway, after calibration, these sticks work great. The movement is smooth, there’s no drift, and I like the feel of them over the OEM ones.This is a nice little upgrade for a reasonable price, which isn’t the case for most computer components these days.I’m removing a star because of the hassle of needing to disassemble my XBox Ally X multiple times to get a working set, but if they’d both worked in the first package it would be a solid five-star upgrade.

Took apart my device to install these for them not to work. I read the comments but I figured it was more hit than miss. I got a complete miss. Right joystick sticks all over the place and left one did not even work. Worst part is, this seems to be the only modules to fit the xbox ally x. I am going to put the old ones back in and wait for another company to create these. It was less than $30 but that is still money thrown down the drain.

It’s a good product so far

All is great now. In the first set. The left module was faulty. Initially I was cheesed off.However I was promptly refunded and ordered another set. Thankfully this one works perfectly.Very easy to install. They feel so much smother and more responsive. I also put some keyboard lube on the ABXY buttons, to make them quieter. It makes sense to do this at the same time, whilst the unit is open.

Right stick drifts straight out of the package, with calibration and without. Left stick was perfect. The resistance feels great in both sticks, much tighter than stock. Installation is very easy. Would easily be 5 stars if there was no drift, I am buying one more kit to see if I can get a good right stick.EDIT: It took 3 kits for me to get non drifting left and right joysticks. Was it worth it? Maybe

AllY Xにて使用。LRどちらも交換しましたがドリフトが直りました。注意点としては交換直後はスティックがあらぬ方向に動くので個体不良を疑いましたが大丈夫です。ArmoryCreate2から交換したスティックのキャリブレーションを実施することで正常になります。

Excelente para una ROG Ally X con drift, se sienten muy buenos. Espero sean durables.

Gret product, perfect replacement for my old joy sticks. Hall effect do me better then original one. Easy instalation and fair price.