🚦 Stop Strong, Drive Confident: The Ultimate Brake Upgrade for Your Truck
Power Stop Z36-976 Front Truck and Tow Brake Pads are premium ceramic pads designed specifically for trucks and SUVs like the Toyota 4Runner, Tacoma, and GX470. Featuring low dust output, stainless steel shims for heat management, and a rust-resistant powder-coated backing plate, these pads deliver superior stopping power, quiet operation, and extended durability. The thermal scorched surface ensures a fast break-in, making them the go-to choice for drivers who demand reliable, high-performance braking on and off the road.
Brand | Power Stop |
Material | Ceramic |
Auto Part Position | Front |
Vehicle Service Type | Truck |
Global Trade Identification Number | 00792088509116 |
Manufacturer | Power Stop |
OEM Part Number | Z36-976 |
UPC | 792088509116 |
Number of Items | 1 |
Model | Z36 Truck & Tow Pad W/Hdw |
Item Weight | 4.66 pounds |
Product Dimensions | 9.25 x 5.5 x 2.25 inches |
Item model number | Z36-976 |
Is Discontinued By Manufacturer | No |
Exterior | Machined |
Manufacturer Part Number | Z36-976 |
D**G
Great product..
Highly recommend this product. All hard wear included. No noise, great stopping power. Z36 for 2008 Tacoma
S**G
These fit more than what they advertise. Great pads.
I found conflicting reviews on these pads in regard to the part number working on other Toyota trucks. My truck showed part number Z36-976B as the front pad set fitting a 2017 4Runner. The difference between this pad set and Z36-976B is nothing more than the pin length. This pad set has shorter pins which weren't long enough for my caliper width. You can reuse your factory pins and springs, assuming they are in good reusable condition, on this pad set and it will work fine. Part number Z36-976B is nearly twice as much which seems excessive when the only difference is a couple of retention pins worth a few bucks. These are great pads that don't squeak or produce a lot of dust when they get hot. I use them on several trucks and have had excellent results over other premium brands that claim to be the best.
M**O
Great Stopping Power
Used on 2016 4runner sr5. Very happy with the results.After install followed instructions to properly break in pad and release the resins in the pad. So far I probably have put about 300 miles with some mountain driving. Coming down the mountain, they smell a bit but never lose grip. Smell goes away as soon as I am on flat ground. Braking is super consistent. I also paired them with brand new front rotors so that has to help. Replaced rear pads but did not replace rotors as they were still good.Best part of all is they are low dust & noise. Usually under heavy break in you'll get crazy dust (at least the older factory pads I used to use created lots of it) but after several weeks I dont feel the need to clean my wheels. They still look silver to the naked eye.
A**R
condition of package
box looked like it was dragged down the street, but all ok inside. some slight hardware differences pins, clips, but seems to be very good quality pads.
M**
Work great.
I have a 2004 Sequoia and decided to do my front brake pads myself since Les Schwab wanted $800.00. They were so easy to install. I did order a spreader tool as well but the total cost was less than $100. They are quiet and work amazing. I needed pads that heavy duty cause I pull my trailer a lot. These did the trick. Highly recommend.
F**4
good pads, very impressed
very affordable and work beyond what I expected. Put them on my 14 Toyota Tacoma 4x4. Very big improvement in braking compared to the Toyota pads. My other vehicles have Hawk Brake pads which work excellent but expensive. I might try these out on my other 2. Very little brake dust. Grip is really good. Very affordable. My Toyota definitely even stops better.
T**0
Low dust pads with good stopping power
Bought when I replaced my rotors and pads on my 2017 4runner sr5. Very surprised at the results.After install they were bedded in properly to release the resins in the pad. So far I probably have put about 300 miles on them and they are about seated into the pad. Braking is super consistent. I dont have to keep gradually pressing the brake pedal to slow the truck down more and more. The pad grips and I'm pretty much holding constant until the truck comes to a stop (if that makes sense). I also paired them with brand new rotors so that helps.Best part of all is they are low dust. Usually during break in you'll get crazy dust (at least the older street pads I used to use created lots of it) but after several weeks I dont feel the need to clean my wheels. They still look silver to the naked eye. Very impressed with these pads. I cant wait to do the rears next.
K**A
great brake pads - almost no dust!
I purchased the Carbon-Fiber Ceramic brake pads about 9 months ago and their performance has been outstanding!Stopping power is consistently firm and strong without being touchy. And brake dust is nearly non-existent.The real test for me was taking a road trip. I've taken a couple road trips since install and previously my front wheels would covered in dust upon return home. With these pads I have to get up close and run my fingers across my wheels in order to see the minimal amount of dust that's left behind. This is after a nearly 1,000 mile trip!I couldn't be more pleased with my purchase and I highly recommend these pads.
Trustpilot
2 weeks ago
2 weeks ago