NcSTAR Universal Pistol Rear Sight Tool,Blue

Muy muy bien artículo lo recomiendo al 100 para quitar y poner miras

I don't frequently write reviews. However, I felt a moral obligation to write one for this product. The value for the price is top notch. I have done some tinkering with my guns in the past but have never adjusted rear sights due to all the talk about how difficult it is. Not with this tool. It is very intuitive but regardless, please read the online instructions first. This is not a plastic piece of junk! I read some negative reviews and believe that in most cases, if the reviewer took a bit more time to properly adjust the tool settings for their application, it would have worked fine. I used this tool to adjust the rear sight on my S&W Shield Plus as the factory setting was off. The only mod I made to the tool was to put a few pieces of painter's tape on each side of the clamp that touches the rear sight, to avoid any scratches. After removing the Allen screw holding the sight in place, I set the slide rail in the tool and calibrated the clamps to begin the process to push the sight to the left. At first, I was a bit nervous about the amount of force needed to push the sight, but that is just a reality of the process. If it required minimal force, you could just use a punch tool. I did really have to crank hard on the clamp to push this sight but it worked like a charm. (The force required has nothing to do with this tool, it is simply a matter of how tight the factory sets the sights - very common). I removed the slide and I nailed it. The rear sight was now centered less than 30 minutes after unboxing the tool, with no scratches or any damage to the sight or rail. Can I give this a 6 star review? :) If I think about the skill level required to do this, if you are capable of disassembling your gun for cleaning it, then you can successfully use this tool to push your sights. I received absolutely nothing for leaving this review. No discounted or free product or anything. Just a happy customer!!!!

Un peut décevant

Ricevuto e provato subito oggi per togliere la placchetta reggi piastrina usata per montare un red dot su una Beretta 92fs. Dopo diverse martellate con il rischio di danneggiare l'arma (la placchetta me l'aveva montata l'armeria ed a mia insaputa usato anche supercolla per tenerla ferma nel tempo) ho optato per questo attrezzo, con poca fatica ha rimosso la placchetta, ora aspetto la tacca di mira LPA da montare. Ricordarsi di mettere olio dove previsto in quanto le forze e pressioni sono molte quando si va a togliere una mira, soprattutto sui cuscinetti, per il resto ha fatto benissimo il suo lavoro, molto soddisfatto dell'acquisto! 👍

I was a bit scared by previous reviews, about how fragile are the jaws of the pushing block. I have seen a lot of bad reviews regarding Smith & Wesson M&P 9mm 2.0. I tried to remove the back sight using a punch, but I have stopped, worried that I am going to damage the sight and/or the slide. I have purchased NcStar rear sight tool and I am happy I did! I have spent more time lubing the threads and positioning columns than actually removing the sight. I have used a good quality gun grease and played the threaded rods back and forth to evenly distribute the grease. I have noticed a huge improvement in the way the holders/sight pushing block were moving/working after proper lubrication. Anyway, I have placed and aligned my M&P 2.0 slide on the tool and start pushing the rear sight carefully being ready to back off at the first sign of struggle, but after a very light reaction, the sight started to move smoothly, using only two fingers to work the pusher all the way out. I am very happy with the purchase. It will serve me well in the years to come. I hope I don't have to mention that I have removed the set screw of the sight. I would recommend this product to anyone, but would like to emphasize proper lubrication! Remember grease is better!