Anycubic Kobra 2 FDM 3D Printer, LeviQ 2.0 Auto-Leveling,Up 300mm/s Print Speed with Dual-Geared Extrusion Structure and Upgraded Cooling System,220 * 220 * 250mm

After having an issue with the Elegoo Neptune 4 I opted to research a replacement and this one does everything very well. From a quick setup to a very easy leveling operation and very nice prints this is a printer that was a good choice. My personal thoughts are that from inception to end product this printer was very well engineered and produced great results. Whether you're doing small projects or something more advanced this will do the job and at the price point it's hard to beat. I highly recommend anyone to invest in this printer you won't be disappointed.

I bought this as a gift and the recipient absolutely loves it. They are constantly printing things with it so it must be pretty easy to set up and use. They have little background in computers, just basic knowledge like copy and paste and control z

It had some problems with elephants' foot but other than that I cannot complain about a starter printer I would definitely recommend it to someone else

I have a ender3 V2 this anycubic Kobra 2 is awesome the first print was perfect and fast wish I would have got it first I will not be buying anymore Creality machines any cubic is the best

Terrible printer with terrible print quality, terrible build quality, and terrible design.

I had to purchase three units before getting one that was working correctly. First unit would not auto level. The second unit made a grinding sound. The third unit is working flawlessly so far. If you are looking for an entry level 3D printer I would recommend it. It was easy to put together and easy to use. I would give it four stars even five, but the quality control was not there in every unit.

Works perfectly so far. Easy to set up and use.

It is a decent printer, with a few things to note. 1. V3.0.6 of the firmware does allow increased print quality, but at the cost of some speed. Go much higher than 200mm/s, and you're bound to get layer shifts. Make sure you check all the different printer speeds on your model, (Top, Bottom, Infill, Walls, etc.), because some of those may go faster than what you have your standard speed set to. 2.PTFE Hotend Tubing in the hotend prevents the temp. from going higher than 270. While I personally am yet to have a reason to print with Nylon, for those who do print with that more often, that will be an issue. You probably could get away with printing Nylon at 270, but you may not get ideal results, and will significantly wear the tubing. In this aspect, the Kobra 2 series is at a serious disadvantage to its competitor, the Elegoo Neptune 4 series. 3.A more minor problem(for me at least), but these are probably Anycubic's loudest printers yet. Not only is the part cooling fan a mighty engine making sure everyone is aware of its 7000rpm, the Z-axis, due to it's auto leveling(which works like a charm by the way,) is constantly adjusting to the unevenness of the bed, making a noise on larger prints when there's a large edge at around the 200mm/s mark or higher. For people who want to have this printer in a quieter environment, you'll have to turn down the fan and the speed. Aside from that, I personally think it's a great printer! If Anycubic has a Black Friday sale, I'll probably get the Kobra 2 Pro and give a rating for that as well.

o utilizzato la Anycubic Kobra 2 come stampante 3D per uso domestico e progetti personali, e l’esperienza complessiva è stata molto positiva, soprattutto considerando la fascia di prezzo. Uno degli aspetti che colpisce subito è la velocità di stampa: rispetto a modelli più vecchi o entry-level, il salto è evidente. La possibilità di stampare molto più velocemente senza perdere troppo in qualità rende la stampante adatta anche a chi produce spesso prototipi o oggetti funzionali. Il sistema di autolivellamento LeviQ 2.0 funziona bene e semplifica notevolmente la fase di avvio. Il piatto risulta correttamente livellato senza dover intervenire manualmente, cosa particolarmente utile per chi non vuole perdere tempo in continue regolazioni. Buona anche la stabilità meccanica e il sistema di estrusione a doppio ingranaggio, che garantisce un’alimentazione del filamento regolare. Con PLA e PETG non ho riscontrato problemi di sotto-estrusione o inceppamenti, a patto di usare profili di stampa adeguati. Le dimensioni di stampa (220x220x250 mm) sono più che sufficienti per la maggior parte dei progetti casalinghi e hobbistici. L’assemblaggio iniziale è semplice e le istruzioni risultano chiare anche per chi non è esperto. Come punto migliorabile, il rumore durante stampe molto veloci si fa sentire, e per ottenere il massimo della qualità conviene dedicare un po’ di tempo alla calibrazione dei parametri di slicing. Nel complesso è una stampante affidabile, moderna e veloce, adatta sia a chi vuole fare un upgrade sia a principianti che cercano un modello performante senza troppe complicazioni.

Je commence dans l'impression 3d et j'ai pu me créer une déco de Noël. L'imprimante est facile à monter et facile d'utilisation je la recommande

Es una maravilla de impresora. La uso para imprimir escenografía y complementos para juegos de miniaturas y va perfecta. El autonivelado es estupendo, te evitas los quebraderos de cabeza de nivelar manualmente, el montaje fue muy sencillo y además incluye la placa de construcción magnética q te facilita mucho la vida a la hora de desprender tus impresiones. Un 10 sobre 10

Der Drucker wurde sehr gut Verpackt und kam sicher bei mir an. Nach zwei Jahren auf meinem alten 3d Drucker wurde es Zeit, sich nach einem neuen und auch schnelleren umzuschauen. Hier bin ich auf den Anycubic Kobra 2 gestoßen da dieser schnell drucken kann und auch preislich in meinem Rahmen ist. Ich muss sagen nach den erst Drucktagen bin ich begeistert. Meine 3D Drucke benötigen die Hälfte der Zeit bei gleichbleibender Qualität. Der Drucker ist leicht zusammenzubauen und in etwa 15min erledigt. Kurze Kalibrierung plus Software Update und man kann auch schon mit den ersten Testdrucken starten. Bei mir läuft er aktuell ununterbrochen und ich hatte noch nicht ein Problem. Weiter so Anycubic und mein nächster wird wieder einer. :) von mir eine klare Kaufempfehlung wer für wenig Geld einen soliden und schneller 3d Drucker möchte.

L’imprimante imprime très bien, je n’ai pour le moment utilisé que du PLA. Le plateau chauffant et le nivellement automatique du plateau facilitent son utilisation. On apprécie rapidement l’outil et au vu du prix je me demande si je n’aurais pas dû prendre la version plusieurs couleurs…. Au plus on imprime au plus on en veut…