Question 1

what is sq. ft. of coverage for a quart

Accepted Answer

I did end up diluting with denatured alcohol per instructions (about half per instructions) and it really stretched the coverage and worked very well.  I would buy it again. I covered 80 sq feet with product to spare.  I applied it to marine grade plywood and some old particle board flooring from a 1989 Airstream floor and it worked very well. I still have some product left.  Good stuff.

Question 2

What is the work time with this product?

Accepted Answer

This may help, (Pot life / work time)

Application @ 40°F: Pot life is 40 minutes, full cure takes 4 days
Application @ 80°F: Pot life is 20 minutes, full cure takes 2 days

They also warn against using the cold weather formula in hot weather, may not cure properly.

Question 3

what is the coverage of the gallon size?

Accepted Answer

Depends on too many variables to really give a straight answer... They size them based on the resin bottle without the volume of the hardener, and there are no VOCs whatsoever.  The "gallon" size will actually yield 1.5 gallons of liquid once mixed with the hardener.  That's quite a bit of coverage as is since this stuff is very thin and easily spread on and absorbed, but if you're using it in a penetrating application you could easily cut that 1.5 gallons 1:1 with denatured Alcohol or Xylene or any other solvent which then would yield more epoxy than I have a use for.  Thinning my penetrating epoxy out I'd guess I've covered 15-20 square feet of high void low quality OSB 3-4 coats, and injected some into holes I drilled into the OSB, and I'm about halfway through a 1/2 gallon order.  I have 31' x 7.5' of OSB and if I were planning to coat and seal the entire thing I would buy the gallon size and another gallon of denatured alcohol.

Question 4

How many square feet will a pint of the cold weather formula cover?

Accepted Answer

It works by penetrating deep into the wood. Coverage is dependent on just how porous the wood structure is. I had a 18’x18’ deck being resurfaced where the beams had split (too many nails and screws) and some of the ends were soft too. I used sister beams on the worst and followed up with the epoxy. I had some epoxy left at the end if that helps.

Brand	TotalBoat
Material	Resin
Item Form	Liquid
Special Feature	Waterproof:
Item Package Quantity	1
Package Information	Syringe
Item Volume	1.5 Gallons
Water Resistance Level	Waterproof
UPC	811932021052
Manufacturer	Jamestown Distributors
Model number	B00J36WRRQ
Item Weight	6 kg 80 g
Package Dimensions	29.59 x 19.99 x 19.51 cm; 6.08 kg
Item model number	B00J36WRRQ
Are batteries included?	No

totalboat Penetrating epoxy

Details

Details

Description

Specifications

Reviews

Common Questions